L7 Thick Lenses contd Flashcards

1
Q

Factors affecting lens thickness

A
  • lens thickness can be related to centre thickness or edge thickness
  • back vertex power (F’v)
  • surface powers
  • refractive index
  • lens form
  • lens shape
  • decentration
  • minimum size uncut
  • minimum centre/ edge thickness (mechanical stability)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Lens shape

A

Influences thickness due to relationship with lens diameter and decentration

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Lens Diameter

A
  • specatacle lenses are cut from a pre made lens blank
  • these lens discs (blanks/uncuts) are made in a range of diff diameters - choice of diameter depends on rx and frame choice
  • generally, for a positive lens, if we can have a smaller blank size, that will affect the overall thickness without even considering changes in lens materials
  • blank sizes tend to go up in steps of 5mm and range available depends on the lab you’re sourcing from and the material lens is made from
  • majority range from 50mm to 70/75mm
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Lens size cut from the same size diameter

A
  • for a negative lens = a larger lens has thicker edges and a smaller lens size has thinner edges
  • for a positive lens = a larger lens has thinner esges and a smaller lens size has thicker edgs
  • going for a smaller frame size results in naturally thinner lens size
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Decentration

A

= (distance bet lenses - px pd)/2
= relationship bet the box centre of the frame and then oc of the lens
- in a perfect dispense both of them would coincide
- if the lens does have to be decentered, it will alter the thickness of the lens
- if we’re cutting centrally through the lens, thickness is gonna be relatively equal on both sides
= the displacement, horizontal and/or vertical of the centration point from the standard oc position

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Minimum size uncut

A

=(mono decentration x2) +ED +2mm
=is the minimum size of the uncut lens that can be used to cut down to the chosen lens shape
2mm to allow the lab to make a mistake

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

ED

A

= Effective diameter of the lens - measurement at its widest point
= measuring from centre to one side and multiplying by 2
= can be horizontal/vertical eg for a rectangular frame, widest part of frame will be horizontal

How well did you know this?
1
Not at all
2
3
4
5
Perfectly