Hyundai/ Kia

Question 1

If Blade is ____, then program with SmartPro.

Answer 1

chipped.

Question 2

The Flip key requires the ___ to program.

Answer 2

SmartPro.

Question 3

What procedure should be run before programming?

Answer 3

battery test.

Question 4

To program a Smartkey a ___ is sometimes required.

Answer 4

prox-slot.

Question 5

What is a prox- slot?

Answer 5

a designated space to program keys in.

Question 6

Where can you find the prox-slot in the SmartPro?

Answer 6

in photos.

Question 7

What do all keys do during programming?

Answer 7

delete.

Question 8

What do you need to do to program a Smartkey?

Answer 8

read pin code.

Question 9

If you read the pin code with the SmartPro what happens usually?

Answer 9

the car stays in programming mode.

Question 10

What do you have to do to take the car out of programming mode?

Answer 10

simply reset the car’s battery.

Question 11

Kia PIN codes can alternatively be attained from what?

Answer 11

Xhorse.

Question 12

How do you pull a code using the Xhorse?

Answer 12

‘Read Transponder’ with Kia Smartkey tip inserted within the loop of the device. Once read, select ‘Clone’ and ‘Start Clone’. Pick the option in the center ‘Hyundai/Kia password’
Now the device will request to ‘Read Data’, either:
{Push-Start} 1. Cycle the ignition ON with the tip of the Smartkey pressing against the Start/Stop button and the device’s antenna closely aimed at the button.
{Prox-Slot} 2. Keep ignition OFF and aim the device’s antenna to the Prox-Slot,
then insert the programmed Smartkey into Prox-Slot.