Ford/ Lincoln/ Mercury

Question 1

When programming a blade+remote what key is not needed?

Answer 1

old key.

Question 2

This programming may require a ___.

Answer 2

10 minute timer.

Question 3

If programming doesn’t take remote what procedure should be used?

Answer 3

8 cycle.

Question 4

What is the 8 cycle procedure?

Answer 4

cycle the ignition ON eight times (rarely four) fast or slow:
-if the blade is edge-cut, finish cycle at ON, and door locks will cycle
-if the blade is high-security, finish cycle at OFF, and car will emit a tone
(keep doors closed to listen)
after car indicates its programming mode, press unlock on each remote.

Question 5

What should you never do when programming these keys?

Answer 5

delete.

Question 6

After programming an older Ford, the car may stay in programming mode, what should you do?

Answer 6

manually cycle the door locks 5 times to exit mode.