HYDRAULICS Flashcards

1
Q

HYDRAULICS

  1. The white HYD PRESS ON annunciator
    indicates that the hydraulic system is
    ________. The system is designed to
    remain pressurized only for _____ periods of
    time as necessary to operate the hydraulic
    sub-systems.
A

HYDRAULICS

  1. The white HYD PRESS ON annunciator
    indicates that the hydraulic system is
    pressurized. The system is designed to
    remain pressurized only for short periods of
    time as necessary to operate the hydraulic
    sub-systems.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

HYDRAULICS

  1. Continuous illumination of the white HYD
    PRESS ON annunciator after a landing gear,
    wing flap, or speedbrake operation indicates
    a _________ of the system which may lead
    to a _______ _______ ______.
A

HYDRAULICS

  1. Continuous illumination of the white HYD
    PRESS ON annunciator after a landing gear,
    wing flap, or speedbrake operation indicates
    a malfunction of the system which may lead
    to a hydraulic system failure.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

HYDRAULICS

  1. The main hydraulic reservoir is located in
    the fairing ______ the _______ and ______
    the trailing edge of the _____ wing.
A

HYDRAULICS

  1. The main hydraulic reservoir is located in
    the fairing below the fuselage and behind
    the trailing edge of the right wing.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

HYDRAULICS

  1. Hydraulic fluid quantity for the main
    system is displayed on a sight gauge on the
    _______ ________ located on the ____ side
    of the fuselage, below the ____ engine.
A

HYDRAULICS

  1. Hydraulic fluid quantity for the main
    system is displayed on a sight gauge on the
    hydraulic reservoir located on the right side
    of the fuselage, below the right engine.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

HYDRAULICS

  1. The main hydraulic system is an open-center
    system, which operates in a ___-pressure
    bypassed condition until commanded to
    _________ by one of the hydraulic sub-
    systems.
A

HYDRAULICS

  1. The main hydraulic system is an open-center
    system, which operates in a low-pressure
    bypassed condition until commanded to
    pressurize by one of the hydraulic sub-
    systems.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

HYDRAULICS

  1. The main hydraulic system powers the
    ______ ____, ____ ____, and _________.
A

HYDRAULICS

  1. The main hydraulic system powers the
    landing gear, wing flaps, and speedbrakes.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly