HUD Flashcards
The HUD is activated by ____.
unstowing the combiner
In the HUD, the default glideslope angle displayed during initial power-up is ____ degrees.
3.00
If operational, the HUD ____.
-must be used for all takeoffs and all approaches and landings to assist in tailstrike prevention
radio
-must be used for low visibility takeoffs and low visibility approaches in the Lower Minimums Program
radio
-combiner must be deployed and the intensity adjusted for ambient conditions in the mandatory regimes
The HUD computer is programmed/controlled for each event ____.
on the CDU HUD menu
In addition to normal flight and navigation guidance, the HUD can also provide all of the following EXCEPT for ______.
RNP and ANP values
If the HUD combiner screen moves to the breakaway position, ____.
the combiner symbology is blanked
An illuminated AIII light on the HUD Annunciator Panel indicates AIII mode is ____.
active
When the HUD NO AIII light is illuminated on the HAP, ____.
conditions have been detected which prevent AIII mode from being continued
When the HUD Combiner NORM/MAN switch is set to NORM, combiner screen brightness is adjusted ____.
by the position of the DIM Control and the amount of light sensed by the ambient light sensor
For routine operations, the HUD must be used on takeoff until at least ____.
Final Climb Segment (clean configuration)
The HUD AIII mode must be selected up to approximately 7 seconds prior to reaching ____ feet AGL.
500
On approach, the HUD must be used no later than ____.
1000 feet AFL
Use of the HUD with an inoperative number 1 radio altimeter is prohibited.
True
