Ground Operation & Servicing Flashcards
- What is the procedure for extinguishing an induction system fire that occurs during starting of a reciprocating aircraft engine?
Continue cranking engine to suck fire out. If not work us CO2 extinguisher
- What is the purpose of pulling a propeller through by hand for two or three revolutions prior to starting a radial or inverted engine?
To detect Hydraulic lock
- What damage is most likely to occur if excessive force is everted on a the crankshaft when there is a liquid lock?
Force can bend or break a connecting rod or damage the cylinder
- What information must be located on or near the fuel filler openings and oil filler openings?
Fuel opening must have “fuel” and “minimum fuel grade”
Oil opening must have “oil”
- Why must aircraft and fuel trucks be grounded together with grounding cable?
Eliminate static electricity build up
- What would be the result of operating an aircraft reciprocating engine using a lower grade AVGAS than that specified for the engine?
Loss of engine power
Efficiency
Possible detonation
- What color is low lead 100 dyed?
Blue
- What are the functions of tetraethyl lead in gas?
To lubricate and reduce detonation
- Why should an aviation mechanic know the meaning of standard light signals which are used by control tower operations?
Loss comms light signals give directions to taxi an aircraft to another part of airport
- What type of knot is typically used when securing an aircraft outdoors with a rope?
A bowline knot
- Which publication lists the standard FAA hand signals a taxi signalman an should use?
AIM
- What is the result of mixing aviation gasoline with jet fuel in a turbine engine?
The tetraethyl lead in gasoline will form deposits on turbine blades and vanes. Decreasing performance and efficiency
- What may result if aviation gasoline that is contaminated with jet fuel is used in reciprocating engine?
Engine failure
- When towing a large aircraft with a tow tractor, what brakes should be used to stop the aircraft?
The tractor brakes
- What are the safety precautions when operating a drill press?
Safety glasses Ear protection Clamp the workpiece securely Adjust for proper RPM Stop machine completely before adjusting work piece Clean area
- Why is tire cage recommended when inflating aircraft tires?
Prevent injury to personnel if tire explodes
- What type of fire can a CO2 extinguisher be used on?
Class A,B,&C