FMS - FMS PREFLIGHT Flashcards
The takeoff shift allows you to adjust for a takeoff from:
A) Another runway B) An intersection departure C) An ILS departure D) An assumed temperature
B) An intersection departure
The preflight data is entered and confirmed through the:
A) MCDU B) MFDU C) ECAM D) ECAS
A) MCDU
The departure time on the Flight Plan page is defaulted to:
A) Planned takeoff time B) 0 C) Arrival time minus taxi, takeoff, cruise and descent D) 1200
B) 0
A derated is a certified takeoff thrust that is:
A) Lower than maximum takeoff thrust B) Equal to the maximum takeoff thrust C) No allowed D) Used only on contaminated runways
A) Lower than maximum takeoff thrust
If the Check Takeoff Data message is displayed, you should check all of the following except:
A) Flap setting B) V speeds C) Takeoff time D) Flex Takeoff
C) Takeoff time
The advantage of entering an alternate airport for your destination during preflight is:
A) Reduce typing in flight B) Better fuel predictions C) Check the weather D) It’s a requirement
B) Better fuel predictions
The first Initialization Page is named INIT Page:
A) 1 B) 1A C) One D) A
D) A
For departure, the pilot flying should normally use what page?
A) Flight Plan A B) Alternate Flight Plan C) Departure D) Takeoff Performance Page
D) Takeoff Performance Page
After manually entering the departure airport in the flight plan, you should select:
A) Arrival airport B) Flight level C) Winds D) Departure
D) Departure
If there is no engine-out SID listed for your departure runway, the system shows:
A) None B) Runway heading C) Not Allowed D) The best SID for that runway
A) None
Extra fuel is the amount of fuel reserve selected by:
A) The dispatcher B) Maintenance C) The mandatory reserve D) The Captain
D) The Captain
Once the arrival runway is selected in the system, you are provided with a list of STARS and:
A) Alternates B) Altitudes C) Transitions D) High speed taxiways
C) Transitions
Taxi fuel defaults to a preset value of:
A) 200 kgs B) 400 kgs C) 200 lbs D) 20 minutes
A) 200 kgs
INIT Page B is used to initialize the gross weight and:
A) Temperature B) Pressure altitude C) Fuel on board D) Center of gravity
D) Center of gravity
You can enter a Company Route by entering either its ident or a:
A) City pair B) Coded name C) Destination D) GPS fix
A) City pair
