FMS - APPROACH PHASE Flashcards
In the Heading or Track mode the flight plan will sequence automatically only if the aircraft flies:
A) In Approach mode B) On the ILS C) Close to the planned route D) Using the GPS
C) Close to the planned route
The decelerated approach allows the aircraft to arrive 1000 ft. above the ground level, in landing configuration, at what speed?
A) V2 B) Vapproach C) Vref+25 D) Vref-10
B) Vapproach
In the Heading/Track mode, the distance to land based on V Approach is indicated by
A) A white circle B) An energy circle C) An amber flashing indication D) A red line
B) An energy circle
When ATC requires a specific speed for the approach set it in:
A) The FMS B) The MCDU C) FCU D) V speed monitor mode
C) FCU
If you are changing runways on an approach and the aircraft is not on the correct heading, you will get a MCDU message that states:
A) Go-Around B) Select Heading/Track First C) Add Drag D) Turn left
B) Select Heading/Track First
When the aircraft is in the Heading/Track mode the approach phase is selected:
A) Manually only B) Manually or automatically C) Automatically only D) By the FMS
A) Manually only
With the Navigational mode engaged, the FMS automatically switches to approach phase over the:
A) IAF B) FAF C) OM D) Deceleration pseudo point
D) Deceleration pseudo point
The ILS frequency is frozen in the receiver, when all of the following occur except:
A) 700 ft. RA B) In Approach mode C) One autopilot on D) In autotuning mode
D) In autotuning mode
The two type of approach techniques are the decelerated and:
A) Early stabilized B) Unstabilized C) Straight in D) Circling
A) Early stabilized
On a non-precision approach, the speed to set constraint for the FAF is:
A) V Approach B) Vref+20 C) V Approach+10 D) Vref-5
A) V Approach
