Flows Flashcards
Preflight Flow
Initiate when done with Exterior Inspection
- Right Sidewall
- Overhead panel
- Glareshield
- Right forward panels
- Pedestal
Rainbow Flow
Initiate upon entering the flight deck for the first time.
Flight deck door Aircraft Number Establish electrical power and air Position Lights Logo light (night only) Security Inspection CBs Manual Gear Extension access door Emergency Equipment Gear Pins Headset Printer paper Normal Checklist / QRH
Aft Overhead Panel
Initialize
Position
ACARS
Parking Brake
Wheel Well Light
Before Push Flow
Initiate Flow when gate agent confirms boarding complete
CA calls for checklists when PERSER ready/door closed
- Hydraulic Pumps…..Checked, on
- Doors (as installed)……Closed
Before Push Checklist ……Accomplish - Transponder……XPNDR
Pushback Clearance…….Obtain - Beacon……On
- Sterile light……On
After Start Flow
Initiated when CA says “Flaps__, After Start Checklist”
FO
- Flap Lever……Set
- Probe Heat……ON
- Engine Start switch(es)……As required
- Anti-Ice……As required
- Trim Air……As required
- Air Conditioning and pressurization……Set
- APU Switch…….As required
- Recall……Checked
- Autobrakes……RTO
- Audio Control Panels……Set
CA
- Generator(s)……On
- Flight Controls……Checked
- Audio Controls (as installed)……Set
Delayed Engine Start Flow
Initiate so engine is online for at least 3 min prior to takeoff
- Generator(s)……On
- Engine Start Sw……As required
- Anti-Ice……As required
- A/C and Pressurization……Set, as required
Trim Air Sw……On after last power transfer - APU Sw……As required
- Recall……Checked
“Delayed Engine Start Flow complete”
Before Takeoff Flow
Initiate after getting FWM, TODM, and FMC & MCP programming
- Final weight manifest……Review (Rip, Load, Verify, Execute)
- ACARS T/O data……Verify
- FMC……Verify
- Flaps……Set
- Trim……Set
- MCP……Set
- Radar/Terrain……As required
- -Final Items– - Departure announcement……Complete “FA please be seated for departure”
- Transponder…….TA/RA
- Start Switches……CONT
- A/C and pressurization……Set
- Recall……Checked
After Takeoff Flow
Initiate when PF calls “Flaps Up, after T/O checklist”
PM
- Flaps……Up, Lights out
- Gear……(NG) Off, Lights out / (Max) Up
- Autobrake……Off
- Engine Start Switches……As required
- Engine Bleeds and packs……Bleeds On, Packs Auto
- Pressurization……Check
- APU……Off (as required)
Descent Flow
Initiate when PF calls for Descent Checklist
- Pressurization……Set
- Recall……Checked
- Landing Distance and Autobrakes……Checked, __set
- Reference Speeds……Flaps__, (ref)__, (taget)__, set/set
- FMC, Radios……Set
- Flight Instruments……Set
- Terrain, radar displays…..As required
Landing Flow
Initiate when PF calls for final flaps and Landing Checklist
FO
- Start Switches……CONT
- Landing Gear……Down, Three green
- Speed Brakes……Armed
- Flaps……___, green light
CA
1. Speed Brake……Arm
After Landing Flow
Initiate when clear of all active runways and time and SA permit
FO
- Flaps……Up
- Stab Trim……Set
- Autobrakes……Off
- Radar……Off
- Flight Directors……Off
- Exterior Lights……As required
- Start Switches……As required
- Wing Anti-Ice……Off
- Engine Anti-Ice……As required
- Probe Heat……As required
- Trim Air……Off (NG)
- Transponder……XPNDR
- Radar mode selector……Test
- APU……Start, on busses (usually 1 min from gate)
CA
- Speed Brake Lever……Down
- Exterior Lights……As required
Parking Flow
Initiate when CA sets the parking brake
FO
- Parking Brake……verify set
- Electrical Power……Ensure
- Engine start levers…….Cutoff
- Seatbelt signs……Off
- Start Switches……Off
- Sterile Switch……Off
- Beacon……Off
- APU Bleed……As required
- A/C……Set
- Hydraulic System……Set
- Anti-Ice……Off
- Probe Heat……Auto
- Wifi switches……Set
- Transponder……Standby
CA
- Parking Brake……Set
- Electrical Power……Ensure
- IRS Selectors……Off
- Fuel Pumps……As required
- External Power……As required
- APU……As required