Flight Instruments, Displays Flashcards
(756) Identify where ground speed and true airspeed are displayed
Ground speed: - Top left corner of the ADI - On the FMS, POS REF page True Airspeed: - TAS/SAT indicator - FMS, Progress page 2
(756) Recall what the stations displayed in green on the HSI map display represent
Stations that are either being AUTO tuned or have been MAN (manually) tuned using the VOR/DME control panel.
(756) Recall how to display LOC (Localizer) DME.
Place the EFIS control panel in EXP ILS or FULL ILS or APP (as installed)
- Read the LOC DME mileage on the RDMI preceded by the letter L and reference the ILS DME mileage in the upper left corner of the HSI.
(756) Recall the VNAV Vertical Deviation scale range is
+/- 400 feet.
(756) Recall the standby ADI has an attitude source that is
selfcontained.
(ALL) Discuss the function of the PLI (Pitch Limit Indicator)
Indicates pitch limit (stick shaker activation point for the existing flight conditions).
(756) Recall what ADI indications are displayed during excessive
glideslope or localizer deviation.
The deviation scale turns from white to amber and the pointer
flashes.
(756) Recall on the ADI where references for F/ S (fast or slow) airspeed are displayed.
The left side of the ADI
- 10 knot scale
(756) Identify the aircraft heading when looking at various HSI displays.
Reference the green “HDG” or “TRK” indications at the top of the HSI
(756) Identify where the wind direction and speed are displayed
In the bottom left corner of the HSI.
(756) Explain what the altitude range “green” arc indicates during climb
or descent.
The “Green Arc” predicts where the aircraft will reach the selected MCP altitude and considers ground speed and vertical speed in its calculations.
(756) Identify the active waypoint on the MAP and on the FMS MCDU
Magenta in the MAP mode.
Line L1 on the active LEGS page.
Line L1 on the PROGRESS page 1.
(756) Explain how the radio altimeter minimums are set and reference where they are displayed.
Set using the rotary switch on the EFIS HSI control panel.
Displayed on the EFIS HSI control panel.
Displayed on the top right corner of the ADI.
(756) Recall how the HSI display modes are selected.
Use the EFIS HSI control panel.
(756) Explain the orientation of the HSI in the PLAN mode.
The PLAN mode is presented True North up.