Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

QAQC > FINALS > Flashcards

FINALS Flashcards

1
Q

Test Frequency for REPEAT ANALYSIS

A

Semiannually (review rejected films immediately for corrective action)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Standard for REPEAT ANALYSIS

A

None but goal should be less than 5% repeat
rate

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

While it is required that a facility calculate its repeat
rate at least semiannually, the repeat analysis is what?

A

an ongoing process.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

While it is required that a facility calculate its repeat
rate at least WHAT, the repeat analysis is an
ongoing process.

A

at least semiannually

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Every time a film must be repeated, a review of why it was necessary to
repeat the x-ray should be conducted. The reason for the repeat should
be documented, then, HOW MANY TIMES IN A YEAR, the repeat rate is calculated.

A

twice a year

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

IN REPEAT ANALYSIS, By WHAT reviewing the documented reasons why films are repeated,
trends or frequent errors can be determined and steps can be taken to
correct the errors.

A

periodically

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Every time a film must be repeated, a review of why it was necessary to
repeat the x-ray should be conducted. The reason for the repeat should
be documented, then, twice a year, the repeat rate is WHAT?

A

calculated

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

IN REPAET ANALYSIS, By
periodically reviewing the documented reasons why films are repeated,
WHAT can be determined and steps can be taken to
correct the errors

A

trends or frequent errors

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

IN REPEAT ANALYSIS, By
periodically reviewing the documented reasons why films are repeated,
trends or frequent errors can be determined and steps can be taken to
correct the WHAT

A

correct the errors

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

A carefully carried out repeat analysis will ensure quality radiographs by
reducing the number of clinical films that are repeated. This analysis will
help to identify ways WHAT??

A
  • to reduce both costs (wasted film and processor
    chemicals and wear on the equipment) and unnecessary radiation exposure
  • and inconvenience to the patient.
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

A carefully carried out repeat analysis will ensure WHAT that are repeated.

A

ensure quality radiographs by
reducing the number of clinical films that are repeated

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Reasons for repeats are usually divided into three major categories:

A

1.EQUIPMENT including, but not limited to, inaccurate kVp, mA etc., light
field/x-ray field misalignment, darkroom fog, and processor problems.
2. PATIENT including, but not limited to, motion, breathing, jewelry or
other foreign objects, and other body parts overlapping area of interest.
3. X-RAY PERSONNEL ERROR including, but not limited to, improperly
set techniques (kVp, etc.), improper collimation, improper positioning, and
poor film handling

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

A carefully carried out repeat analysis will ensure quality radiographs by
reducing the number of clinical films that are repeated. This analysis will
help to identify ways to reduce both costs (wasted film and processor
chemicals and wear on the equipment) and unnecessary radiation
exposure and inconvenience to the patient. The facility should work
towards a repeat rate of less than HOW MANY PERCENT?

A

a repeat rate of less than five percent.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

IN REPEAT ANALYSIS, In order to reduce repeats, it is necessary to know what THAT are being repeated and why.

A

(chest, abdomen, etc.) and projections (AP, lateral, etc.)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

WHAT is important IN REPEAT ANALYSIS.

A

Immediate analysis is important

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

IN REPEAT ANALYSIS, The problems can then be addressed more
efficiently. The analysis will demonstrate the WHAT?

A

The analysis will demonstrate the strengths and weaknesses of the x-ray operation

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

IN REPEAT ANALYSIS, WHAT is a valuable QA improvement tool.

A

The data from the repeat analysis

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

IN REPEAT ANALYSIS, The data from the repeat analysis is a WHAT?

A

a valuable QA improvement tool.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

IN REPEAT ANALYSIS,
While some are computerized, most usually consist of WHAT that are placed
on the films at the time of rejection indicating the reason.

A

labels

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

VERY IMPORTANT NOTE IN REPEAT ANALYSIS

A

ALL SUBSTANDARD FILMS SHOULD BE IMMEDIATELY
ANALYZED FOR THE CAUSE OF THE REPEAT AND LOGGED ON
THE REPEAT ANALYSIS FORM. THE DATA ARE USED TO
CALCULATE THE REPEAT RATE

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

IN REPEAT ANALYSIS,
These systems can be beneficial especially for facilities with a WHAT

A

a high volume

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

IN REPEAT ANALYSIS, WHAT is usually provided to tabulate results

A

A chart(s)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

IN REPEAT ANALYSIS,
Repeat analysis should be designed to accurately evaluate the WHAT THAT ARE being produced by the facility.

A

type of radiographs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

IN REPEAT ANALYSIS, Analyzing repeated films/exposures:
1. Review each exposure carefully as it is completed.
2. If any exposure needs to be repeated, the reason should be documented
WHAT?

A

should be documented
on the Repeat Analysis Form or what ever tracking system the facility is using

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

IN REPEAT ANALYSIS,
(Note! For large volume facilities like hospitals, the repeat rate may be
WHAT? However, all repeated
films must be evaluated immediately.)

A

may be calculated by using a statistically significant sample

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

IN REPEAT ANALYSIS,

CORRECTIVE ACTION:
The percentage of repeats should guide the facility to focus their efforts to
those areas needing the most attention. For example, films that are too light
or too dark may be due to WHAT? that
require repair or re-calibration, or technique charts may need updating. All
corrective actions need to be documented.

A

processing problems or equipment problems

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

IN REPEAT ANALYSIS, Analyzing repeated films/exposures:
3. The results of these reviews should be tabulated periodically. For large
facilities, HOW MANY TIME OF analysis is needed;

A

frequent (perhaps weekly) analysis is needed

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

IN REPEAT ANALYSIS, Calculating the repeat rate:
1. At the beginning of the analysis period, record the WHAT?. If additional film is received during the analysis
period, be sure to record the additional film on the form. For facilities
with digital or computed radiography, be sure to include ALL exposures
in analysis.

A

record the number of sheets of unused film in the facility

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

IN REPEAT ANALYSIS,

Records: Maintain record of repeat analysis for HOW MANY YEARS

A

for 1 year

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

IN REPEAT ANALYSIS, Example: If the facility has students, the repeats from students should be evaluated WHAT from the other x-ray personnel.

A

independently

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

IN REPEAT ANALYSIS,
3. The results of these reviews should be WHAT?. For large
facilities, frequent (perhaps weekly) analysis is needed; smaller facilities will
usually have fewer repeated films, so less frequent analysis is needed.

A

tabulated periodically

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

IN REPEAT ANALYSIS, Analyzing repeated films/exposures:
3. The results of these reviews should be tabulated periodically. For large
facilities, frequent (perhaps weekly) analysis is needed; smaller facilities will
usually have WHAT?

A

have fewer repeated films, so less frequent analysis is needed.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

IN REPEAT ANALYSIS, Calculating the repeat rate:
1. At the beginning of the analysis period, record the number of sheets of
unused film in the facility. If additional film is received during the analysis
period, be sure WHAT?. For facilities with digital or computed radiography, be sure to include ALL exposures
in analysis.

A

be sure to record the additional film on the form.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

Test Frequency FOR ARTIFACT EVALUATION

A

Examine every film for artifacts, in-depth evaluation
semiannually

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

Standard FOR ARTIFACT EVALUATION

A

No significant artifacts

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

IN ARTIFACT EVALUATION,

  • While gross artifacts, especially those WHAT will be immediately noticed; small
    artifacts that do not detract from the diagnostic quality of the films may
    be missed.
A

in the area of interest (such as in the lung field of a chest x-ray)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

IN ARTIFACT EVALUATION,
* All films should be WHAT? as they are produced

A

should be examined for artifacts

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

IN ARTIFACT EVALUATION,

  • If an artifact is noted on any film, WHAT and
    correct it
A

immediately investigate the cause

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

IN ARTIFACT EVALUATION,

  • It will also prevent small repairs from becoming larger and more costly
    repairs. Conduct A WHAT?
A

an in-depth analysis semiannually.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

IN ARTIFACT EVALUATION,
Both an immediate artifact detection process and an in depth evaluation
semi-annually is necessary due to WHAT?

A

the nature of medicine

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

IN ARTIFACT EVALUATION,

  • While WHAT, especially those in the area of interest (such as in the lung field of a chest x-ray) will be immediately noticed; small
    artifacts that do not detract from the diagnostic quality of the films may
    be missed.
A

gross artifacts

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

IN ARTIFACT EVALUATION,

  • While gross artifacts, especially those in the area of interest (such as in
    the lung field of a chest x-ray) will be immediately noticed; small artifacts that do not detract from the diagnostic quality of the films may
    be WHAT?
A

may be missed.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

IN ARTIFACT EVALUATION,
WHAT are marks on the film that do not contribute to or may
decrease the diagnostic value of the film.

A

Artifacts

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
Q

IN ARTIFACT EVALUATION, Artifacts are marks on the film that WHAT?

A

that do not contribute to or may decrease the diagnostic value of the film

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

IN ARTIFACT EVALUATION,
* They may in fact cause a misdiagnosis by either WHAT. Artifacts must be kept to a minimum.

A

by either masking or imitating
pathology

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

IN ARTIFACT EVALUATION,
* They may in fact cause a WHAT by either masking or imitating
pathology. Artifacts must be kept to a minimum.

A

cause a misdiagnosis

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
26
Q

IN Some Common Artifacts And Their Causes, what is Crescent shaped mark resulting from
bending the film while loading or unloading film

A

Crinkle marks (Finger nail)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

IN ARTIFACT EVALUATION,
* As most artifacts are the result of WHAT in the
darkroom or processor problems, they can be easily minimized through
a good quality assurance program.

A

improper film handling

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

Artifacts fall into four categories:

A
  1. Darkroom problems, including film handling, darkroom cleanliness
    and darkroom fog.
  2. Processor problems, including dirty rollers, light leaks, improper
    drying.
  3. Patient caused artifacts, including clothing, jewelry, hair mousse.
  4. Cassette and screen problems, including warping, cracking,
    discoloration and dirt or dust
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
27
Q

IN ARTIFACT EVALUATION, Artifacts are marks on the film that do not contribute to or may
decrease the diagnostic value of the film.
* They may in fact cause a misdiagnosis by either masking or imitating
pathology. Artifacts must be kept to a WHAT

28
Q

Equipment Required IN ARTIFACT EVALUATION:

A
  1. At least 5 films from each processor
  2. Magnifying glass
  3. Book on film artifact identification
28
Q

IN ARTIFACT EVALUATION,
1. Examine a large enough number of films to determine if there are
artifact problems. At least HOW MANY films from each processor should be
examined.

A

At least 5 films from each processor should be
examined

29
Q

IN ARTIFACT EVALUATION,
2. Make WHAT of all artifacts and their WHAT. Comparisons of artifacts with published examples are helpful to determine their cause

A

Make note of all artifacts and their probable cause. Comparisons of artifacts with published examples are helpful to determine their cause.

29
Q

IN ARTIFACT EVALUATION, 5. Record on WHAT and
maintain record for 1 year

A

Quality Control Log - Semi-Annual Tests (Form 6)

29
Q

IN ARTIFACT EVALUATION, 5. Record on Quality Control Log - Semi-Annual Tests (Form 6) and
maintain record for HOW MANY YEARS

A

for 1 year

30
Q

IN Some Common Artifacts And Their Causes, what is Relative humidity is low and clothing generates static
electricity which discharges onto film during handling

A

Trees (static)

30
Q

IN ARTIFACT EVALUATION, 5. CORRECTIVE ACTIONS: must be completed within HOW MANY DAYS, documented and records retained for a
minimum of HOW MANY years.

A

IN ARTIFACT EVALUATION, 5.
CORRECTIVE ACTIONS: must be completed within 30 days,
documented and records retained for a minimum of 2 years.

30
Q

Some Common Artifacts And Their Causes

A
  1. Scratches: Dirt on counter top or feed tray Dirty or damaged
    processor rollers/guide shoes/turnarounds Stuck film which is
    scratching other films
  2. Fingerprints, smudges: Wet or dirty hands when handling film
  3. Crinkle marks (Finger nail): Crescent shaped mark resulting from
    bending the film while loading or unloading film
  4. Partially exposed or fogged film: Light leak in darkroom or cassette
    Scatter radiation to cassettes left in x-ray room during exposure
  5. Trees (static): Relative humidity is low and clothing generates static
    electricity which discharges onto film during handling
  6. Black spots: Film got wet or contaminated prior to processing
    Emulsion from pervious films transfers from dirty processor roller to film
  7. White spots: Dirty screens Emulsion pulled from film by dirty
    processor rollers Defect in film emulsion
  8. Brown film: Inadequate washing, Inadequate fixing
  9. Water spots: Depleted chemicals in processor Poor squeegee action at
    wash rack exit Clogged dryer air tubes
30
Q

IN Some Common Artifacts And Their Causes, what is Dirty screens Emulsion pulled from film by dirty
processor rollers Defect in film emulsion

A

White spots

31
Q

IN Some Common Artifacts And Their Causes, what is Dirt on counter top or feed tray Dirty or damaged
processor rollers/guide shoes/turnarounds Stuck film which is
scratching other films

31
Q

IN Some Common Artifacts And Their Causes, what is Wet or dirty hands when handling film

A

Fingerprints, smudges

31
Q

IN Some Common Artifacts And Their Causes, what is Film got wet or contaminated prior to processing
Emulsion from pervious films transfers from dirty processor roller to film

A

Black spots

31
Q

IN Some Common Artifacts And Their Causes, what is Light leak in darkroom or cassette
Scatter radiation to cassettes left in x-ray room during exposure

A

Partially exposed or fogged film

32
Q

IN Some Common Artifacts And Their Causes, what is Depleted chemicals in processor Poor squeegee action at
wash rack exit Clogged dryer air tube

A

Water spots

32
Q

IN Some Common Artifacts And Their Causes, what is : Inadequate washing, Inadequate fixing

A

Brown film

33
Q

test frequency for analysis of fixer retention

A

Initially and semiannually

34
Q

in analysis of fixer retention, * This test determines the WHAT remaining in
processed film

A

quantity of residual fixer

35
Q

in analysis of fixer retention,
* Excessive fixer will WHAT

A

will degrade the quality of the image on stored
radiographs

35
Q

in analysis of fixer retention, *
* It is an indicator of WHAT quality of the radiographs

36
Q

in analysis of fixer retention, * WHAT will degrade the quality of the image on stored
radiographs

A

Excessive fixer

36
Q

standard for analysis of fixer retention

A

5-micrograms/sq. centimeter (or 0.05 grams/sq. meter)

37
Q

in analysis of fixer retention, * WHAT indicates that the film is not being adequately
washed. Possible causes are insufficient wash time or the wash water is
not being exchanged fast enough

A

Excessive hypo retention

37
Q

in analysis of fixer retention, *
* Excessive hypo retention indicates that the film is WHAT. Possible causes are insufficient wash time or the wash water is
not being exchanged fast enough

A

is not being adequately
washed

38
Q

in analysis of fixer retention,
* Excessive hypo retention indicates that the film is not being adequately
washed. Possible causes are insufficient wash time or the wash water is
WHAT

A

not being exchanged fast enough

38
Q

Equipment Required in analysis of fixer retention:

A
  • Hypo test kit
  • Eyedropper - if not provided with hypo test kit
  • Paper towels
  • White paper
  • Form Quality Control Log – Semi-annual Tests
38
Q

Equipment Required in analysis of fixer retention:
* 2. Place HOW MANY DROPS of the residual hypo test solution on the film

A

Place one drop of the residual hypo test solution on the film.

38
Q

Equipment Required in analysis of fixer retention: * 1. Process HOW MANY sheets of unexposed film.

A

Process one sheet of unexposed film

39
Q

Equipment Required in analysis of fixer retention:

    1. For dual sided emulsion film, you need HOW MANY SIDES SHOUD PUT ON THE ON film
A

For dual sided emulsion film, you need only do one side of film

39
Q

Equipment Required in analysis of fixer retention:
* 5. Allow the solution to stand for HOW MANY minutes.

A

Allow the solution to stand for two minutes

40
Q

Equipment Required in analysis of fixer retention:
* 5. Allow the solution to stand for two minutes.
* 6. Blot off excess solution with WHAT.

A

paper towel

40
Q

in analysis of fixer retention:
CORRECTIVE ACTION:

Check to see if the water for the processor is WHAT.
If the same result is obtained, contact the processor service company and
have them service the processor.

40
Q

(Note! This test is not required for the Polaroid Instant film System.

A

analysis of fixer retention AND DARKROOM FOG

40
Q

in analysis of fixer retention:
CORRECTIVE ACTION:

All corrective actions must be completed within HOW MANY days, documented
and records retained for a minimum of HOW MANY years.

A

All corrective actions must be completed within 30 days, documented
and records retained for a minimum of 2 years.

41
Q

test frequency for darkroom fog

A

Initially, thereafter semiannually AND after each
change to the darkroom

41
Q

Standard for darkroom fog

A

0.05 Optical Density Difference

42
Q

in darkroom fog,
* To ensure that the darkroom safelights and other light sources inside
and outside of the darkroom WHAT

A

do not contribute to the fogging of the
radiographic film

42
Q

in darkroom fog,

  • This test should be repeated after each WHAT or any change in
    the darkroom that could affect darkroom fog conditions.
A

bulb change

42
Q

Equipment Required in darkroom fog

A
  • Opaque card
  • Densitometer
  • Timer
  • Radiographic film and cassette
  • Form Quality Control Log - Semi-Annual Tests
42
Q

Equipment Required in darkroom fog:
1. Ensure that all safelight filters are those specified by the film manufacturer. The filters must WHAT. Also ensure
that the bulbs are the appropriate wattage and the safelight is placed at
the appropriate distance from the film handling area.

A

The filters must not be faded or cracked.

42
Q

Equipment Required in darkroom fog:

    1. Turn off all the lights the darkroom and wait FOR HOW MANY minutes to allow your
      eyes to adjust to the darkness.
A

Turn off all the lights the darkroom and wait 5 minutes to allow your
eyes to adjust to the darkness.

42
Q

Equipment Required in darkroom fog:

    1. Make an exposure using the technique factors of HOW MANY KVP AND MAS?.
A

40-50 kVp and 1 or
2 mAs (400 speed film).

42
Q

Equipment Required in darkroom fog:

  1. Turn on all safelights for HOW MANY minutes.
42
Q

Equipment Required in darkroom fog:

(Note! The optical density of the covered side of the film should be in
the range of HOW MANY on the densitometer. If it is greater or less,
decrease or increase the mAs accordingly.)

A

1.4 to 2.0 on the densitometer

43
Q

Equipment Required in darkroom fog:

  • Determine the amount of darkroom fog by subtracting the density
    measurement of the unfogged area from the density measurement of
    the fogged area. Darkroom fog should be WHAT
A

should be no greater than 0.05.

43
Q

Equipment Required in darkroom fog:

    1. If darkroom fog is greater than 0.05, WHAT. If the results remain the same, a light leak is the probable cause of
      the problem. If the fog level disappears, the fog was due to the safelight.
    1. Record on Quality Control Log - Semi-Annual Tests (Form 6) and
      maintain record and film for 1 year.
A

Repeat the test with the safelight
off.

43
Q

Equipment Required in darkroom fog:

    1. If darkroom fog is greater than 0.05, repeat the test with the safelight
      off. If the results remain the same, WHAT is the probable cause of
      the problem
A

a light leak

43
Q

Equipment Required in analysis of fixer retention:
* 8. Record on WHAT

A

Record on Quality Control Log - Semi-annual Tests and maintain record
of 1 year.

43
Q

in analysis of fixer retention:
CORRECTIVE ACTION:
If the stain indicates that there is more than HOW MANY micrograms per square
centimeter residual hypo in the film, the test should be repeated.

A

more than 5 micrograms per square
centimeter

44
Q

Test Frequency FOR Screen-Film Contact/Cassette Integrity/Screen Cleanliness

A

Initially and annually therefore or as needed

44
Q

Standard FOR Screen-Film Contact/Cassette Integrity/Screen Cleanliness

A

No areas of poor contact > 2 cm in diameter

44
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness, Cassettes used for diagnostic examinations should be WHAT that may degrade image quality.

A

should be free of dust and
dirt particles

45
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness,
Cassettes used for diagnostic examinations should be free of dust and
dirt particles that may WHAT

A

degrade image quality.

45
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness, Each cassette-screen combination should have its own unique
identification. This allows the identification of any cassette in which
artifacts are noticed much easier. Each screen should be marked with a
unique identifier near the edge of the screen WHAT. The same identification number should also be
placed on the outside of the cassette. Cassettes that contain artifacts
should be cleaned and/or removed from service and/or replaced.

A

using an opaque,
permanent marker

45
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness,
* The film used must be matched to the screen’s light output as specified
by the manufacturer. In other words if the intensifying screen produces
WHAT

A

green light

45
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness, The procedure ensures that optimum contact is maintained between the
screen(s) and film in each cassette.

A

Film-Screen Contact

45
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness, Equipment Required:

A
  • 1/8 inch mesh Brass or Copper Screen. The mesh can be placed between two thin sheets of acrylic or cardboard to protect it.
  • All cassettes.
45
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness, Equipment Required:
1. Load cassette to be tested and let rest for approximately FOR HOW MANY minutes to
allow trapped air to escape.

A

15 minutes

45
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness, Equipment Required:

  1. Place the wire mesh screen on top of the cassette and make an
    exposure. The optical density on the film should be between HOW MANY Suggested technique is 1 or 2 mAs at 50 kVp
A

1.0 and 2.0

45
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness, Equipment Required:

  1. Place the wire mesh screen on top of the cassette and make an
    exposure. The optical density on the film should be between 1.0 and
    2.0. Suggested technique is WHAT
A

1 or 2 mAs at 50 kVp

46
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness, Equipment Required:

  1. View the film on a view box in a room with WHAT . Stand 6 -8 feet from the view box to evaluate the film
A

with low ambient light

47
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness, Equipment Required:

  1. View the film on a view box in a room with low ambient light. Stand HOW MANY FEET feet from the view box to evaluate the film
A

Stand 6 -8 feet from the view box to evaluate the film.

48
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness, Equipment Required:

CORRECTIVE ACTION: Areas greater than HOW MANY cm in diameter of poor
contact indicate the need for corrective action. Clean the cassettes and
retest. Areas of poor contact around the periphery of the cassette may
indicate faulty latches or worn seals on the cassette. If cleaning does not
eliminate the areas of poor contact, the cassette should be replaced. Most
cassettes have a life expectancy of 10 years with adequate care. All
corrective actions must be completed within 30 days, documented and
records retained for a minimum of 2 years.

48
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness, Equipment Required:

CORRECTIVE ACTION: Areas greater than 2cm in diameter of poor
contact indicate the need for corrective action. Clean the cassettes and
retest. Areas of poor contact around the periphery of the cassette may
indicate faulty latches or worn seals on the cassette. If cleaning does not
eliminate the areas of poor contact, the cassette should be replaced. Most
cassettes have a life expectancy of WHAT All
corrective actions must be completed within 30 days, documented and
records retained for a minimum of 2 years.

A

a life expectancy of 10 years with adequate care

48
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness,

Cassette Integrity
* Equipment Required

A

All Cassettes, Quality Control Log

49
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness,

Cassettes must be in good physical condition in order to prevent light
leaks that will fog film.

A

Cassette Integrity

50
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness,

Cassette Integrity :

A
  1. Examine each cassette. Cassette should be in good physical condition
    with no cracks, dents or other damage.
    * 2. Check hinges. Cassette should close fully and easily. There should be
    no gaps around edges of cassette.
    * 3. Check latches. They should work easily to open cassette. They
    should close and lock easily.
    * 4. Open cassette. Check condition of screens and grids. Screens and
    grids should not be cracked, broken or discolored
51
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness,

Cassette Integrity : * CORRECTIVE ACTION:

A

replace or repair damaged cassettes
immediately. If screens or grids appear damaged, they should be
replaced. All corrective actions must be completed within 30 days,
documented and records retained for a minimum of 2 years.

52
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness,

Screen Cleanliness Equipment Required

A
  • Screen cleaner (as recommended by the
    manufacturer of the screens)
  • Lint-free gauze pad, equivalent lint-free cloth, or camel hairbrush.
  • All cassettes
53
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness,

Screen Cleanliness Equipment Required:
2. Dust the screen with the WHAT
* 3. If foreign material (e.g. dirt, developer solution) can not be readily
removed with a camel hairbrush or canned air, use liquid screen
cleaner.
* 4. After cleaning with manufacturer approved cleaners, screens should
be allowed to air-dry, standing vertically, before returning the cassette to
use

A

camel hairbrush and canned air

54
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness,

Screen Cleanliness Equipment Required:

    1. If foreign material (e.g. dirt, developer solution) can not be readily
      removed with a camel hairbrush or canned air, use wWHAT
A

liquid screen
cleaner

55
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness,

Screen Cleanliness Equipment Required:

    1. After cleaning with manufacturer approved cleaners, screens should
      be allowed to WHAT, before returning the cassette to
      use
A

to air-dry, standing vertically

56
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness,

Screen Cleanliness Equipment Required:
CORRECTIVE ACTION:
If the screen shows signs of WHAT, it should be
replaced. All corrective actions must be completed within 30 days,
documented and records retained for a minimum of 2 years

A

cracking, fading or discoloration

57
Q

IN Screen-Film Contact/Cassette Integrity/Screen Cleanliness,

Screen Cleanliness Equipment Required:
CORRECTIVE ACTION:
If the screen shows signs of cracking, fading or discoloration it should be
WHAT. All corrective actions must be completed within 30 days,
documented and records retained for a minimum of 2 years

QAQC (3 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2025 Bold Learning Solutions. Terms and Conditions