Extras

Question 1

Who has the authority to change the scope of work during a depot level maintenance project?

Answer 1

KO

Question 2

What is the primary function of a lubricant?

Answer 2

To form a protective film between adjacent surfaces, to reduce wear and dissipate heat generated

Question 3

A method of determining water contamination levels in oil?

Answer 3

Hot plate

Or

Crackle test

Question 4

For Diesel engines with defined oil change intervals greater than it equal to 750 hours. Oil samples shall be taken a minimum of how many times between oil changes?

Answer 4

3

Question 5

Oil samples shall not exceed how many operating hours?

Answer 5

250

Question 6

Newly overhauled engines shall have break-in oil samples drawn and submitted after how many hours?

Answer 6

10
25
50 hours

Tech standard 262. P.21

Question 7

When TIN is present in an oil sample. What components is it coming from?

Answer 7

Bearings overlay material

Bushings

Question 8

Soft caps made of Douglas fir or pine, that are used for block construction for dry dock. What are what are the minimum and maximum thickness of the soft cap?

Answer 8

2” to 6”

Question 9

If a ships force is planning on completing an acid flush of a J/W system to remove rust or scaling. How many weeks prior to performing the task do they need to contact SFLC?

Answer 9

16 weeks

Tech standard 220. Page 10

Question 10

If oh levels drop below 7.0 in a J/W system. What are the likely causes?

Answer 10

Cracked heads

Or

Liners

Question 11

45’rbm how much does the reversing bucket weigh?

Answer 11

77lbs

Question 12

When installing new bushings on the reversing bucket of the 45’ RBM how long do you let the sealant dry before reinstalling?

Answer 12

24hrs

Question 13

In a Honda engine how do you read the codes when u install the scs service connector. What do the blinks mean?

Answer 13

The number of long blinks equals the first digit and the number of short blinks equals the second digit