Exam #2- Word Doc (3) Flashcards
The HEIGHT of a GRID lead STRIPS compared to the WIDTH between them is called what?
a. grid radius
b. grid focal range
c. grid lines
d. grid ratio
grid ratio
Which of the following 3 radiographic projections should routinely use compensating filtration?
a. AP thoracic, lateral thoracic, and full spine
b. AP lumbar, lateral lumbar and full spine
c. lateral lumbar, lateral thoracic, AP thoracic
d. lateral thoracic, lateral lumbar, lateral cervical
AP thoracic, lateral thoracic and full spine
Comparing two films with the kV and mAs constant, one taken at 40” FFD and the other at 72” FFD, which of the following would occur?
a. decreased density of the 40’’ film and increased image size on the 72’’ film
b. decreased density of the 72’’ film and decreased image size on the 40’’ film
c. increased density of the 40’’ film and decreased image size on the 72’’ film
d. increased density of the 72’’ and increased image size on the 40’’ film
Increased density of the 40” film and decreased the image size on the 72” film
The 10 day rule refers to which of the following?
a. 10 days after the onset of menses is the safest time for x-raying a female
b. 10 days before the onset of menses is the safest time for x-raying a female
c. 10 days after cessation of menses is the safest time for x-raying a female
d. 10 days before cessation of menses is the safest time for x-raying a female
10 days after the onset of menses is the safest time for x-raying a female
** An accurate collimator should not allow more than ___ percent of the SID of light outside of the exposure field.
a. 1
b. 2
c. 3
d. 4
2
** If a film was taken at 80 kV at 100 mA for ½ second and a second was taken at 80 kV at 50 mA for one second and a third film at 80 kV at 200 mA for ¼ second, what would be the outcome?
a. the first film would have more density
b. the second film would have a higher scale of contrast
c. the third film would have less density
d. they would all be the same
I think they would all be the same?
FIND the ANSWER!!
Which of the following is the most effective in REDUCING SECONDARY RADIATION?
a. collimation
b. filtration
c. tube window
d. tube housing
filtration
Too HIGH of a kV will have which effect on the film
a. quantum mottle
b. high contrast
c. blurry images
d. increased penumbra
quantum mottle
too HIGH kV or too LOW mAs
Which of the following statements is TRUE about film DENSITY?
a. 30% of the mAs is equal to 15% of the kV
b. 50% of the kV is equal to 30% of the mAs
c. 30% of the kV is equal to 50% of the mAs
d. 50% of the mAs is equal to 15% of the kV
50% of the mAs is equal to 15% of the kV
If you took a lateral LUMBAR film with 90 kV at 100 mA for one-fourth of a second using 40” FFD and it was too light but you could see all the structures, which should you do to get a better film?
a. increase the kV by 15%
b. increase the mA by doubling it
c. increase the kV by doubling it
d. increase the time by 50%
increase the mA by doubling it
kV is in optimal range for lat. lumbars
** If you took a lateral CERVICAL with 66 kV at 100 mA for one-tenth of a second at 72” FFD and it was too light but you could see the structures, which of the following would be the best solution for your retake?
a. increase the kV by 15%
b. increase the mA by doubling it
c. increase the kV by doubling it
d. increase the time by 50%
increase the kV by 15%
kV NOT in optimal range
(Why not increase mA as well?)
Which step should you take when x-raying an ELDERLY female?
a. Decrease the kV by 15%
b. Increase the kV by 15%
c. Decrease the mAs by 30-50%
d. Increase the mAs by 30-50%
Decrease the mAs by 30-50%
Rays that exit the patient and HIT the FILM are termed what?
a. classical rays
b. secondary rays
c. primary rays
d. remnant rays
remnant rays
Which of the following would result in an INCREASE in the amount of x-rays PASSING THROUGH the patient WITHOUT INTERACTION?
a. use of an air gap
b. use of a grid
c. higher mAs
d. higher kV
use of a grid
A LATERAL CERVICAL film could use which of the following that a lateral thoracic or lumbar shouldn’t?
a. an air gap
b. a grid
c. a 40’’ FFD
d. a filter
an air gap
cervicals = air gap
(everything else = grid)
** If you took four A-P lumbar films, the first with 95 kV and 6.25 mAs, the second with 106 kV and 3.75 mAs, the third at 58 kV and 60.0 mAs and the fourth at 85 kV and 8.0 mAs, which would have the LOWEST scale of contrast?
a. The first
b. The second
c. The third
d. The fourth
the second