Evolution 1A In-line pumping

Question 1

In a 4 FF engine who is the hydrant FF & who is the hose FF?

Answer 1

Hydrant FF- control
Hose FF - Back-up
1 note

Question 2

In a 5 FF engine who is the hydrant FF & who is the hose FF?

Answer 2

Hydrant FF- Control FF
Hose FF - Door FF
1 note

Question 3

E-309 is 10-84 at a PD fire. The ECC stops so that the rear step is opposite the hydrant. The hydrant(control) FF gets off the rig & does what?

Answer 3

He is equipped w/ hydrant wrench, a 2 1/2” gate & tests the hydrant. He should take a bolt cutter if necessary. 3.1

Question 4

After the hydrant is deemed serviceable who keys the hydrant,& what does he do?

Answer 4

The hose( 5FF door 4 FF back-up) FF by pulling sufficient 3 1/2” hose from the bed. He then mounts the backstep & prepares to use signal buzzer. 3.2

Question 5

If ILP is to be used what size hydrant main should you be on?

Answer 5

6” or larger.

During water alert ILP shall not be used unless absolutely necessary. notes 2

Question 6

How many lengths of hose shall be used initially for the supply line?

Answer 6

not more than 6

notes 4

Question 7

E-309 plans to use ILP. However they are going to need to hand stretch back to the hydrant. What is the maximum # of 3 1/2” supply hose that can be hand stretched?

Answer 7

A max. of 3 lengths.

notes 10

Question 8

FDNY rigs are supplied w/ a back step signal buzzer. What do the buzzer tones mean?

Answer 8

one- stpo
two- hose ff in position pumper to proceed
three- back-up
note 13