Engines/APU Flashcards

1
Q

What does the Engine Start Lever Control? What occurs in each position?

A

Ignition system - IDLE: Energized / CUTOFF: Deenergized

Spar Fuel Shutoff Valve - IDLE: Electronically opened / CUTOFF: Closed

Engine Fuel Shutoff Valve - IDLE: Opened / CUTOFF: Closed

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What is the purpose of the Electrical Engine Control (EEC)?

A

Each EEC uses thrust lever inputs to automatically control forward thrust (manual and autothrottle) and reverse thrust.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What light(s) indicate the EECs are in Normal Mode

A

ON and white circle around

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

With an EEC switch showing both ALTN and ON, thrust levers never having been brought to IDLE, what mode is the EEC in?

A

Soft Alternate

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

The EECs provide redline protection(s) for which parameters?

A

N1 and N2 redline overspeed protection in normal and alternate modes.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What is indicated by the ENGINE CONTROL (amber) light? Is it dispatchable?

A

Illuminates when the EEC detects faults in the Engine Control System.

Not Dispatchable

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What indicates an EGT exceedance after engine shutdown?

A

Red Box around EGT digital readout

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

How is a hot start indicated during ground starting?

A

The readout will be displayed white and flashing if the EEC senses conditions that may lead to hot start or stall.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What causes the ENG FAIL (amber) alert on the EGT indicator

A

Engine Start Lever is in the IDLE position and below sustainable idle (50% N2)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

How do you display the Fuel Used?

A

Selecting USED with the FUEL FLOW switch

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

EECS will abort an engine start for which start malfunctions?

A

-Impending hot starts
-engine stalls
-EGT start limit exceedances
-wet starts

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

Which position(s) does a start switch need to be in for both igniters to activate in case of an engine flameout?

A

Any position

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

How is reverse thrust indicated on the Upper Display engine instruments?

A

REV (amber/green) indications above N1.

Amber: when in transition or not locked

Green: reverser is deployed

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What causes a REVERSER (amber) light on the Engine Panel

A

Illuminates when the thrust reverser is commanded to stow, and extinguishes 10 seconds later when the Isolation Valve closes.

If it illuminates for more than 12 seconds a malfunction has occurred and the ENG annunciator and MASTER CAUTION lights illuminate

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What powers the APU Electronic Control Unit?

A

Switched Hot Battery Bus

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

Will the APU start without battery power?

A

No

17
Q

What will cause the automatic shutdown of the APU?

A

-Overspeed
-low oil pressure
-high oil temperature
-APU fire
-Fuel Control Unit failure
-EGT exceedance
-other system faults monitored by the ECU