Engines

Question 1

What is the maximum oil consumption per hour?

Answer 1

25.6 oz

Question 2

What is the inlet hazard area?

Answer 2

10 ft radius from inlet and 4 ft aft of inlet. Increase by 20% when winds are over 25 knots.

Question 3

What is the start procedure with an air start unit?

Answer 3

First you will preop all S EE being used then you will hook up the 108 start it up and make sure power is available then you will hook up the huffer and position it correctly behind the wing with the exhaust facing away from the aircraft. You will also make sure the hoses fully laid out with no kinks and make sure there is it no damage. Then power up the unit. Then the pilot will tell you they have electrical power. Then they will tell you to apply bleed air. Then you turn up engine one after one is up tell your lineman to shut down and disconnect the huffer. After one is up tell your lineman to shut down in disconnect the hopper and 108 and push them out of the safety diamond, then start engine two.

Question 4

What type of oil is used to service the engines?

Answer 4

Mil-prf 23699 mobile jet II

Question 5

When can you get it accurate oil service reading?

Answer 5

5 to 30 minutes after engine shutdown.

Question 6

What is the maximum thrust the P8 can produce for engine?

Answer 6

27,300 pounds

Question 7

What type engines are on the P8?

Answer 7

Two CFM56-7B turbo fan engines

Question 8

When do you stop servicing engine oil?

Answer 8

When you reach the lower Philmark on the servicing gauge.

Question 9

What is required to be locked out prior to opening the engine cowling doors during the daily inspection?

Answer 9

Standby hydraulics and leading edges.

Question 10

How many kVA does each IDG supply to the P8?

Answer 10

180 kVA