ECS Flashcards
What TM covers Operators manual for Engagement Control Station, Truck Mounted: AN/MSQ-132 (Patriot Air Defense Guided Missile System) 31 Aug 2000
TM 9-1430-1600-10-1
TM 9-1430-1600-10-1 covers
Operators manual for Engagement Control Station, Truck Mounted
What publication covers Patriot Tactics, Techniques, and
Procedures
ATTP 3-01.87
ATTP 3-01.87 covers
Patriot Tactics, Techniques, and
Procedures
CONSOLE MODE consists of what buttons?
4 buttons: WPC control, friendly Protect, Equipment Control, ECCM assist
CONSOLE MODE does what 2 things?
enables and deselects other switch-indicator groups on the console
selects alerts to be sent to the console
WPN CONTR switch-indicator (white): comes on and enables the following console switch-indicator groups
1) SYSTEM CONTROL
2) TRACK EVALUATE
3) RADIATE
4) ENGAGEMENT OVERRIDE
5) ENGAGEMENT INITIATE
6) ENGAGEMENT MODE
7) RADAR / IFF & LAUNCHER CONTROL
8) LOW POWER
WPN CONTR
Weapons Control
FRNDLY PROT
Friendly Protect
FRNDLY PROT switch-indicator (white): comes on and enables the following console switch-indicator groups:
1) TRACK EVALUATE
2) ENGAGEMENT OVERRIDE
EQUIP CONTR
Equipment Control
EQUIP CONTR switch-indicator (white): when the switch-indicators are enabled (illuminated) at both manstations,
all radar faults are reported immediately upon detection on both CRTs.
If the EQUIP CONTR switch-indicator is enabled at only one manstation,
all radar faults are reported only on the manstation with switch-indicator enabled.
When both EQUIP CONTR switch-indicators are disabled (not illuminated)
radar set faults must be stable for 3 minutes before reported.
ECCM ASSIST switch-indicator (white
Allows for automatic tabular generation during Initialization.
Situation Display Select consists of what 3 things
Map Data, track data, offset/scale
What indicates if Situation DisplaySelect MAP data is on?
switches are set to off when the A SCOPE display switch is initiated and set back on when A-scope terminates.
Map data has how many switch indicators and what are they?
8
Defended areas
Wpn contro areas
Georef grid
Mask/terr maps
ID areas
LNCHR Graph display
Range rings
Sector bounds
DEFENDED AREAS (white): does what when on?
comes on and displays all defended areas and defended points
defended areas and defended points look like what when DEFENDED AREAS (white) is illuminated
Low brightness lines with single letter designators.
DEFENDED AREAS (white) switch indicator correlates with what Tab?
Tab 70
WPN CONTR AREAS (white) switch indicator does what?
displays weapon control volumes and combined volumes with their labels displayed in low brightness.
WPN CONTR AREAS (white) correlates to what Tab?
Tab 71
GEOREF GRID (white): switch indicator does what?
displays asterisk indicating grid points and high brightness two-letter designators identifying major intersections.
GEOREF GRID (white) correlates with what Tab
Tab 72.
Mask Terrain/Maps (white) does what?
displays all masked terrain as open low brightness figures of dashed lines with two-digit numbers, indicating altitude of masked terrain and/or general maps.
Mask Terrain/Maps (white) 4-POSITION SWITCH displays in sequence
masked terrain and
general maps,
masked terrain only, and
general maps only.
General maps include
general purpose maps,
FSCL,
IFF off-line,
ICC,
CRG’s,
LCS’s and
general point.
Mask Terrain/Maps (white): correlate with what tab?
Tab 72
ID AREAS (white): displays…..
volumes with safe passage corridors, restricted,
prohibited,
friendly, or
hostile origin attributes,
ID volumes with weapon control status,
IFF on-line,
passive ID on-line, and
combined IFF/passive ID on-line.
ID AREAS (white) correlates with what tab?
Tab 71.
LNCHR GRPH DSPL displays….
general direction of the LS High/Low bright of LS indicates operate or standby Local launchers: LS#, Bank, #of hot missiles Remote launchers: LS#, Bank, Grouping, Hot Missiles To display remote launchers press “Hook”.
LNCHR GRPH DSPL correlates with what tab?
Tab 85.
RANGE RINGS (white): comes on and
displays six arcs of low-brightness, straight and segmented lines, corresponding to range
SECTOR BOUNDS (white): comes on
displays adjacent FP track sector bounds and FP identifier. Track bounds are two dash lines in low brightness. Adjacent FP bounds are displayed during FP-to-FP operations.
Which switch-indicators when enabled enables all radar faults are reported immediately upon detection.
Equipment Control
This S/I correlates with Tab 71, comes on and displays ID volumes with safe passage corridors, restricted, prohibited, friendly, or hostile origin attributes, ID volumes with weapon control status, IFF on-line, passive ID on-line, and combined IFF/passive ID on-line?
ID Areas
What S/I correlates with Tab 70?
Defended Areas
What tab do you change English/metrics?
Tab 14 pg 1
Where do you go to set Band A-D LO/HI
Tab 14 pg 2
Where do you go to set medium speed category limits?
Tab 14
What is tab 14?
Target display control
Where do you set jammer strobe line display range?
Tab 14
Where do you turn on/off TBM launch point determinations?
Tab 14 pg 3
What is tab 15
VTWS- volume track while search