Cycle 1 - 12

Question 1

What is correct about tool tying

Answer 1

Half hitch on binder tied and rope wrapped through fork up to the adz end

Question 2

What is incorrect about brownstone type rowframes

Answer 2

Posses rear fire escape

Question 3

2.17 What is incorrect about the redcued profile procedure

Answer 3

High left hand grip

Question 4

3.17: When performing a lowering procedure the lowering point should be midway between the substantial object and parapet?

Answer 4

True

Question 5

What is the backup not responsible for?

Answer 5

Driving the pumper

Question 6

When you have used 25 percent of your cylinder what color shows on the hud?

Answer 6

Solid Green

Question 7

What are the diagonal parts of a truss?

Answer 7

Webs

Question 8

What is not a reason to use the purge valve

Answer 8

Slightly damaged face-piece

Question 9

True or False, the backup man is responsible for maintaining door control while flaking out a line to the floor above?

Answer 9

False

Question 10

What is not required inside the stand pipe kit?

Answer 10

Operating Wheel

Question 11

What is a major disadvantage in PD construction?

Answer 11

Open Interior Stairs

Question 12

What is not a cause for collapse?

Answer 12

Wall out of plumb

Question 13

What is the way to get to the roof of an olt?

Answer 13

BAR
Adjoining building
Aerial
Rear Fire Escape

Question 14

What is the tool assignment for the 1st due roof at a 3rd floor fire in a 6 story nfpmd?

Answer 14

Halligan Hook
LSR
Halligan

Question 15

1.17: What knot is used with the atlas belt to lower a firefighter for a rope rescue?

Answer 15

Bowline on a bight

Question 16

What is not a measured knot?

Answer 16

Slippery Hitch

Question 17

What is used to connect NST to FDNY threads?

Answer 17

Adapter

Question 18

Safety Team
1 Engine and 1 ladder?

Answer 18

LCC and Control