CompTIA Network+ 008 Certification All-in-One Exam Guide, 8th ED by Mike Meyers - CH Quizes Flashcards
Where does a Hub send data?
Only to the Receiving System
Only to the Sending System
To ALL the Systems connected to the Hub
Only to the Server
To ALL the Systems connected to the Hub
What uniquely identifies every NIC?
IP Address
Media Access Control Address
ISO Number
Packet ID Number
Media Access Control Address (MAC Address/Physical Address)
What Windows Utility do you use to find the MAC Address for a System?
ipconfig /all
ipcfg /all
ping
mac
ipconfig /all
A MAC Address is known as a _______ address?
IP
Logical
Physical
OEM
Physical
A NIC sends data in discrete chunks called ________?
Segments
Sections
Frames
Layers
Frames
The MAC Address of which of the following begins a Frame?
Receiving System
Sending System
Network
Router
Receiving System
Explanation:
A. The frame begins with the MAC address of the receiving NIC, followed by the MAC address of the sending NIC, followed, in turn, by type of encapsulated data, the data, and FCS.
A Frame ends with a special bit called the Frame Check Sequence (FCS). What does the FCS do?
Cycles data across the Network
Verifies that the MAC Addresses are correct
Verifies that the Data arrives correctly
Verifies that the IP Address is correct
Verifies that the Data arrives correctly
Which of the following is an Example of a MAC Address?
0-255
00-50-56-A3-04-0C
SBY3M7
192.168.4.13
00-50-56-A3-04-0C
Which Layer of the OSI Model controls the segmentation and reassembly of Data?
Application Layer
Presentation Layer
Session Layer
Transport Layer
Transport Layer
Which Layer of the OSI Model keeps track of a systems connections to send the right response to the right computer?
Application Layer
Presentation Layer
Session Layer
Transport Layer
Session Layer
Which of the following topologies required termination?
Star
Bus
Mesh
Ring
Bus
Explanation:
B. In a bus topology, all computers connected to the network via a main line. The cable had to be terminated at both ends to prevent signal reflection.
Star-Bus is an Example of _______ topology?
Transitional
System
Hybrid
Rampant
Hybrid
Of the topologies listed, which one is the most fault-tolerant?
Point-to-Point
Bus
Star
Ring
Star
What term is used to describe the interconnectivity of Network components?
Segmentation
Map
Topology
Protocol
Topology
Coaxial cables all have a ______ rating?
Resistance
WATT
Speed
Ohm
Ohm
Which of the following is a type of coaxial cable?
RJ-45
RG-6
BNC
Barrel
RG-6
Which Network topology connected nodes with a Ring of Cable?
Star
Bus
Ring
Mesh
Ring
Which Network topology is most commonly seen only in Wireless Networks?
Star
Bus
Ring
Mesh
Mesh
Which of the following is a Duplex fiber-optic connection?
LC
RJ-45
ST
SC
LC
Explanation:
A. LC = Local Connector, Of the options given, only the LC connector is designed for duplex fiber-optic. LC = Little Connector
LC and MT-RJ connectors are always duplex, meaning both the send and receive cables are attached.
You can certainly find SC connectors or sleeves to make them duplex too, so don’t get too caught up with which can be which.
What is the most common category of UTP used in new cabling installations?
Cat 3
Cat 5e
Cat 6
Cat 7
Cat 6
Ethernet Hubs took an incoming packet and _______ it out to the other connected ports?
amplified
repeated
filtered
distorted
repeated
What is at the begining of the Ethernet Frame?
MAC Address
Length
Preamble
CRC
Preamble
Explanation:
Preamble, a 7-byte series of alternating ones and zeroes followed by a 1-byte start frame delimiter or an 8-byte series of alternating ones and zeroes, always precedes a frame. The preamble gives a receiving NIC time to realize a frame is coming and to know exactly where the frame starts. The preamble is added by the sending NIC
What type of bus did 10Base-T use?
Bus
Ring
Star Bus
Bus Ring
Star Bus
Explanation:
10BASE-T Summary
• Speed 10 Mbps
• Signal type Baseband
• Distance 100 meters between the hub and the node
• Node limit No more than 1024 nodes per hub
• Topology Star-bus topology: physical star, logical bus
• Cable type Cat 3 or better UTP cabling with RJ-45 connectors
What was the max distance that could separate a 10Base-T node from its Hub?
50 m
100 m
185 m
200 m
100 m
When used for Ethernet, Unshielded Twisted Pair (UTP) uses what type of connector?
RG-58
RJ-45
RJ-11
RS-232
RJ-45
What was the max number of nodes that could be connected to a 10Base-T Hub?
1024
500
100
185
1024
Which of the following is NOT True of Crossover Cables?
They are a type of Twisted Pair cabling
They reverse the sending and receiving wire pairs
They are used to connect Switches
Both ends of a Crossover Cable are wired according to the TIA/EIA 568B Standard
Both ends of a Crossover Cable are wired according to the TIA/EIA 568B Standard