Compass E175 PIC Flows Flashcards
Learn PIC flows
PIC Before Start
1: Start APU
2: Red Beacon on
- ————————–
3: Acknowledge Aircraft loading in MCDU via ACARS
4: Sterile Switch to on
5: No electrical devices off
6: Thrust levers Idle
7: Steering off
PIC Before Taxi
1: Press TOGA button and verify Flight director on PFDs
2: Pull up flight controls synoptic page
3: “Set T/O Flaps___ flight control check”
4: Perform flight control check, ensure steering off
PIC Taxi
1: Turn on nose taxi light
2: Depress and release steering handle
3: Check brakes via rudder pedals
4: Verify correct runway in MCDU
5: Check flight instruments for proper indications
PIC Before Takeoff
1: Auto throttles on and confirm mode on PFD
2: External lights on/off as required
PIC After landing
1: Landing and strobe lights off
2: Taxi lights as required
PIC Parked at the gate
1: Parking brake on
2: Sterile, No elec devices and fasten seat belt signs off
3: Thrust levers idle
4: Eng 2 to stop or both to stop if APU is running
5: Hydraulic 1 and 2 Auto, 3A off
6: Beacon off
PIC Preflight before being seated
1: Maint logbook Checked
2: Cockpit reinforced door panel checked
3: Airplane Manuals and documents onboard
4: Check status of emergency equipment
PIC Preflight after being seated
Overhead 1: DVDR- Test 2: Passenger signs- Set 3: Fire extinguisher panel- Set 4: Hydraulic panel- Set ---------------------------------------------- Compass and glareshield 1: Magnetic Compass- Check 2: Glareshield lights- As required 3: Display control panel- Set ---------------------------------------------- Side Console 1: Flight deck window- Closed and Locked 2: Oxygen quantity, masks, regulators and audio panel- Check 3: EFB- power up ---------------------------------------------- Instrument panel 1: Reversionary panel- Set 2: Flight instruments- Set/XCKD 3: Status page-check 4: Autobrake- Off 5: GND prox Terr INHIB- Check 6: EICAS- Check ---------------------------------------------- Center Pedastal 1: Flight control disconnect handles- Check 2: Trim panel- Check 3: Parking brake- Set 4: Digital audio control panel- Test/Volumes set 5: Speed brake lever - Closed 6: Thrust levers- Idle 7: Eicas Full button- Check 8: Ignition selector knobs- Auto 9: Shaker 1&2 Cutout buttons- Check 10: Flight control mode pane- Check 11: MCDU- Setup