Communications Flashcards
Is the PA system available on battery power?
Yes! Powered on Battery Bus
Where are the audio systems for the flight deck located?
Physical radios are located in the E&E compartment
What is the purpose of the ALT-NORM switch on the ACP?
Allows use of radio in the event of a malfunction
Hardwires ACP1 to VHF1 and ACP2 to VHF2, ACP3 to VHF1
NORM-ACP = operating normally
ALT-ACP = operates in degraded mode (if you’re both in alternate, you will not get any
aural callouts (GPWS, etc))
SH 5.010 pg 4 & 8
The Push-To-Talk switch, when toggled, transmits on which transmitter?
Whatever is selected
SH 5.010 pg 3
What does the Service Interphone switch do?
Connect external headset jacks on the airplane (on the aft overhead panel)
SH 5.010 pg 10
What does the VHF TEST switch do?
Removes Auto squelch feature - allowing background noise and potentially
aiding reception of weak signals
SH 5.010 pg 16
What failure messages display on the RTPs, and what do they mean?
FAIL/FAIL = the selected radio has failed
PANEL/ FAIL = panel has failed
SH 5.010 pg 17
What considerations should be made before keying the HF radio on the ground?
Do not key the HF Radio while the aircraft is being fueled/defueled. Injury to
personnel or fire may result. Aft service doors should be closed.
SH 5.010 pg 18
What is the priority of source selection in the data mode?
VHF
- –> SAT PHONE
- ——-> HF
What is the notification of an incoming SAT phone call?
aural chime - select ANSWER on SAT menu on CDU
SH 5.010 pg 23
How is communication established using the oxygen mask?
select MASK and SPKR on ACP (mask will NOT activate speaker)
How can the flight deck alert the ground crew?
GRD CALL switch (overhead panel) sounds horn in nose wheel well.
SH 5.010 pg 13
How can a PA be made? Which ACP, hand mic, or interphone has priority?
Can use PA handset or standard microphone and related ACP (boom, oxymask,
handheld mic)
Flight Deck has highest priority overall - hand mic overrides ACP within the
flight deck
SH 5.010 pg 11
What does the ATTEND button do?
two tone chime (bing bong!) in the pax cabin and illuminates both pink master
call lights.
SH 5.010 pg 13
What does a SELCAL reset button do and when is it used?
extinguishes and resets the SELCAL light, used after a call
RESET otherwise you cannot use it or receive another SELCAL
SH 5.010 pg 27