Comm/Nav Flashcards

1
Q

What manual contains magnetic compass swing procedures?

A

Both the TM 1-1500-204-23 and TM 1-1520-BLACKHAWK contains the magnetic compass swing procedures.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What manual covers the ARC-201 VHF/FM radio set troubleshooting?

A

The TM 1-1520-BLACKHAWK covers the ARC-201 VHF/FM radio set troubleshooting.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What manual contains the maintenance test flight procedures?

A

The TM 1-1520-237-MTF contains the maintenance test flight procedures.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Which is not one of the steps in the testing/troubleshooting of the pitot-static system?

A

Free Air Temperature gage test. Setup, Altimeter/VSI test, Airspeed indicator test, Barometric altimeter lighted bezel, and shutdowns are the five steps of testing/troubleshooting the pitot-static system.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

When does a standby compass compensation need to be completed?

A

The standby compass compensation is completed whenever there is a modification or change to the electrical system or major structural changes, compass is suspected of being in error, flux valve loose, removed or replaced and every 12 months.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What is not a reason for a compass replacement?a.air visible in the bowlb.failure of card to rotate freelyc.total deviation of the eight headings exceeds 5 degreesd.clouded or discolored liquid

A

Total deviation of the eight headings exceeds 5 degrees. Compass replacement criteria includes clouded or discolored liquid, illegible card markings, failure of card to rotate freely, cracked bowl, broken frame, or broken lugs, erratic action, or failure of compass to respond after compensating, lubber line loose or missing, air visible in bowl, if the total deviation of the eight headings exceed 8 degrees.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

The standby compass compensation must be completed when any of the following occurs:

A

The standby compass compensation must be completed when any of the following occurs:Modification or change to the electrical system, major structural changes, compass is suspected of being in error, flux valve loose, removed, or replaced, and every 12 months.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Operational Rules of 5:

A

1.No. 1 Bearing Pointer a.Doppler/GPS2.No. 2 Bearing Pointer a.ADF b.VOR3.Course Deviation Bar (HSI) a.Doppler b.VOR c.Localizer4.Course Deviation Pointer (VSI) a.Doppler b.VOR c.Localizerd.FM Home (has priority)5.Roll Command Bar (VSI) a.Doppler b.VOR c.Localizer d.FM Home e.Heading

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

Make sure Tug is at least …………… from the compass/aircraft being calibrated.

A

100 feet

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

Audio junction box location and purpose

A

The Audio Junction Box is located below the lower console radios. All intercom and radio transmission/reception goes through the junction box. Audio from IFF, radar warning set, VOR/LOC, ADF, Marker Beacon, engine out, low rotor and stabilator passes through the junction box. Also flood light control voltage to the cabin and troop commander ICS.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What component compensates for deviations caused by unwanted magnetic fields?

A

The Magnetic compensator compensates for deviations caused by unwanted magnetic fields.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

How many feet away from the aircraft should a tug be placed during a compass swing?

A

A tug should be placed at least 100 feet from the aircraft during compass swing.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

Which component displays pitch and roll attitude, turn rate, slip and skid?

A

The Vertical Situation Indicator (VSI) displays pitch and roll attitude, turn rate, slip and skid.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What navigational set computes present position and bearing, time, and distance to selected destinations?

A

Doppler/Global Positioning Set (GPS) Navigation Set computes present position and bearing, time, and distance to selected destinations.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What antenna is contained inside the Quad Antenna?

A

The Quad Antenna contains VHF/AM, and the non-directional sense antennas.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What component provides turn rate information for the Pilot and Copilot VSI?

A

The Rate of Turn indicating set contains two rate gyros (gyro), one for each pilot and contains turn rate information.

17
Q

How many ICS control panels are located throughout the UH-60A/L?

A

There are 5 ICS control panels throughout the UH-60 A/L.

18
Q

What type of radio is the AN/ARC-186 radio set?

A

The AN/ARC-186 radio set is a VHF radio set.

19
Q

What type of voice communications does the AN/ARC-164 radio set provide?

A

The AN/ARC-164 radio set provides two way UHF/AM communications.

20
Q

Which antenna in the AN/APX-100 Transponder set replies to an interrogation signals?

A

The reply is automatically routed to the antenna that receives the interrogation signal.

21
Q

What manual is used to perform test flight checks?

A

The manual is used to perform test flight checks is the TM 1-1520-237-MTF.

22
Q

Which is not one of the components that is tested during Hover Checks portion of the Test Flight Checks?

A

The components that are checked during the Hover Checks portion of the Test Flight Checks are the Compass, Turn Rate Indicator, Vertical Gyros.

23
Q

What component is not tested during the Cruise Check portion of the Test Flight Checks?

A

Command Instrument Set is not tested during the Cruise Check portion of the Test Flight Checks.