Chapter 2 End Of Chapter Flashcards
What is the secondary mission of the A/S 32-30A ?
Tow small aircraft
The A/S 32A-30A is primarily designed for towing
Ground support equip
The A/S 32A-32 towing tractor (SD-2 spotting dolly) is controlled by the use of a
Joystick
What is the maximum towing capacity of the A/S 32A-30A (support equip/ aircraft towing tractor)?
40,000 Ibs
The overall height of the A/S 32A-32 towing tractor (SD-2 spotting dolly) is
30 inches
What is the drawbar pull of the A/S 32A-32 towing tractor?
14,000 lbs
How many phases are there in the ground support licensing program?
2
Who will handle the phase 2 portion of the ground support licensing program
Division
Phase 2 of the ground support licensing program covers
On the job training
What type of material is the NWC – 4 Universal wheel chock made from?
Polyurethane
What is the difference between the regular TD – 1B and the type use on amphibious assault ships?
Length
For specific information concerning the high powered tiedown assembly for each type of aircraft you should refer to the
MIM
When utilizing NWC –4 universal wheel chock, where should the adjustable end of the chock be placed on the aircraft wheel
Aft
The TB -1B can be tightened by use of the
Tensioner assembly
The 24 ALBAR is designed specifically for what aircraft?
SH-60
When the aircraft elevator is loaded to capacity with all pumps in use, what is the total duty cycle time?
60 seconds
The horizontal locking bar of the aircraft elevator are powered
Pneumatically
Aircraft elevator safety Stanchions should not be operated in
Automatic mode
V-1 division is responsible for what part of the aircraft elevator operation?
Flight deck
V-3 division is responsible for what part of the aircraft elevator operations
Hanger deck
A division is responsible for what part of their aircraft elevator operation
Machinery room
There are how many different composition of nonskid
2
Nonskid coating kit are supplied in how many components
2
The shelf life of nonskid
1 year
What is the most preferred method of nonskid removal
Water- jetting
In order to ensure the correct primer coverage, the DFT reading must be taken when the primer has
Cured
When completing the primer application process what will allow corrosion to set in and degrade the process?
Holidays
VLA marking on the hanger deck are placed _______ from the deck
14 feet
The ship frame number Markings place on both the starboard and port bulkhead at frame interval of
10
For what class ships does the naval air warfare Center visual landing aids general service bulletin No. 8 establish standard certification requirements and inspections?
CVN
