Chapter 1 End of Chapter Flashcards
What makes a standard screwdriver different from Phillips head screwdriver?
Tip is shaped different
How many main parts make up the construction of the standard screwdriver?
3
The stillson adjustable wrench is equipped with how many jaws?
2
What provides Gripping ability on the stillson adjustable wrench?
Serrated teeth
When a define force must be applied to a nut or bolt head what tool must be used?
Torque wrench
The hinges on bolt cutter should be kept?
Well oiled
What tool can be used as a lever for moving heavy objects short distances?
Wrecking bar
The term pneumatic describe what type of power source?
Air
Excessive air pressure when utilizing pneumatic tools will result in?
Damage to the tool
The average size electric drill is equipped with what capacity, three finger chuck?
1/4
The pneumatic chipping hammer is another tool useful to the ABH when scaling?
Large area
Which power tool can be manufactured to be powered by air or electricity?
The rotary impact scaler or portable sander
Where exact measurements are required, what measuring tool is used?
Caliper
On steel or tape rule the lone line represent
Inch mark
What should be done to prevent tape or fiberglass rules from Kinking?
Pulled straight from the case
Dynamometer is an apparatus use to determine?
Breaking strength
Uses for the dynamometer may include determining the breaking strength of the tensioning system of what equipment on shore?
E-28
Before portable electrical tools are used for the first time after procurement, they should be inspected by?
Electrical safety officer
Personnel operating power tools that produce excessive noise level are required to wear hearing protection issue by?
Divisional supply representative
What class explosion proof electric tool should be utilize where exposed explosives are present
1
Handheld portable electric tools authorize and for use onboard ships be equipped with?
On/off switch
Extension cords should be a no longer than 25 feet in length except when use on what class ship?
CVN
Which of the following are allowed to worn around rotating machinery?
Earrings
It is required to wear leather gloves when handling
Sharp material
Tending lines are use for
Personal safety
Generally small stuff is line that is less than?
1 3/4 inches
What knot is used to secure components on the MK – 1 like preserver?
Bowline
When would an ABH possibly require the use of a block and tackle?
Overturn a crashed aircraft
What is the mechanical advantage of the gun tackle
2:1
It is imperative that equipment be stowed in it’s assigned area for what reason?
Ready for use
