Chapter 10 Flashcards
Are electromechanical output devices that are used to put information from the computer onto paper. p447
Printers
Four classifications of printers: p448
inkjet (bubble-jet)
laser
thermal
Use some from of impact and an inked ribbon to make an imprint on the paper. p 448
Impact Printers
Impact printers also use a paper feed mechanism called _______that requires special paper. p448
Tractor Feed
Is one of the oldest printing technologies in use. p448
Daisy- wheel printer
When the printer needs to print a character it sends a signal to the mechanism that contains the wheel. This mechanism is called the what? p448
print head
An electromechanical hammer called a _________ then strikes the back of the petal containing the character. p448
Solenoid
Their speed is rated by the number of ________ they can print. p449
(CPS) Character per second
This typewriter level of quality was given a name: p449
(LQ) Letter Quality
These printers work in a manner similar to daisy-wheel printers but instead of a spinning character-imprinted wheel the print head contains a row of pins (short, sturdy stalks of hard wire. p449
Dot-Matrix Printer
The main disadvantage of dot- matrix printers is their _______ which can be quite poor compared to the quality produced with a daisy wheel. p 450
Image quality
The output quality of such printers is referred to as _________ good mainly for providing your initial text to a correspondent or reviser. p450
Draft quality
(NLQ) stands for what? p450
Near letter quality
what does finishers do? p493
It does this by folding stapling hole punching sorting or collating the sets of documents being printed into their final form.
Typically attaches to the front of a laser printer and feeds in envelopes one at a time. p492
Envelope feeder
What are some of the things to watch out for in your printers environment: p489
Heat
Light
Ozone
Ammonia
When working with print media it is especially important to calibrate all your hardware including your monitor scanner printer and digital camera to ensure what? p476
Color matching
Before installing any device read your devices what? p475
Installation Instructions
If the wrong printer driver is selected the computer will send commands in the wrong language. If that occurs the printer will print several page full of what? p 475
Garbage
PCL stands for what? p 473
Printer Command Language
GDI stands for what? p473
Graphics Device Interface
Developed by Hewlett-Packed in 1984 and originally intended for use with ink-jet printers as a competitor to PostScript. p473
PCL
Is actually a Windows component and is not specific to printers. p 473
GDI
Simply wireless transmissions that use radiation in the infrared range of the electromagnetic spectrum. p472
Infrared Transmissions
It’s very rare to find a serial printer in use today due to slow what? p471
Data transmission speed
Is the collection of hardware and software that allows the printer to communicate with a computer. p470
Interface
An interface incorporates several components including its interface type and the what? p470
Interface software
Talking about the ports used in getting the printed information from the computer to the printer. p470
Interface type
A metallic roller called the what ______ inside an EP cartridge acquires a -600VDC charge called a bias voltage. p466
Developing roller
What are the steps for the EP print process. p464
processing charging exposing =writing developing transferring fusing cleaning