Ch 9 quiz Flashcards
In what networking plane would RRM exist?
Management
Control
Data
None of these
Control
What model allows data to be sent from the AP directly to the wired destination?
Distributed Data Forwarding
Core Layer Forwarding
Distribution Layer Forwarding
Access Layer Forwarding
Distributed Data Forwarding
What protocol is used with CAPWAP tunnels?
RTLS
IPSec
UDP
PPTP
UDP
In a split-MAC model, which one of these is usually performed in the AP?
802.11 authentication
Beacon frames
802.1X/ EAP
802.11 association
Beacon frames
What can an AP use to locate a WLAN controller when DHCP is not configured to provide the location, and the controller is on a separate network?
Broadcasts
WINS
DNS
NTP
DNS
When three controllers are installed as primary controllers, and one is installed as a backup for all three, what kind of high availability is described?
N+1
RAID5
Redundant +1
None of these
N+1
What Layer 3 QoS marking method plays a role in QoS in WLANs?
TLS
AC
WMM
DSCP
DSCP
In a cloud-based model, what happens when the cloud is unavailable?
The APs cease to function, and the WLAN is inoperable
The APs function based on the last received configuration
The APs switch to autonomous mode and must be manually configured
The APs switch to controller-based mode with the onside backup controller
The APs function based on the last received configuration
What is determined by the RS/CTS threshold?
The frame size at which RTS/CTS must be used
The signal strength at which RTS/CTS must be used
The number of associated clients at which RTS/CTS must be used
None of these
The frame size at which RTS/CTS must be used
While no WLAN design is easy, why is MCA RF planning simpler in 5 GHz bands?
Automatic channel planning actually works there
Signals do not propagate as far
More channels are available
We know more about the 6=5 GHz band
More channels are available