CAR 521 Approval of the Type Design or a Change to the Type Design of an Aeronautical Product Flashcards
CAR 521?
Approval of the Type Design or a Change to the Type Design of an Aeronautical Product
Before CARs came into force, the approval type design was known as?
Type approval
A document, including a repair design certificate issued before Dec 1, 2009.
Repair Design Approval
A document issued by the Minister to record the approval of a change to the type design.
Supplemental Type Certificate
A repair design in respect of a repair to an aeronautical product identified in the document by a _______ _______.
serial number/part number or other unique ID
A document issued by the minister certifying the type design of an aircraft, aircraft engine, aircraft propeller or aircraft appliance meets the applicable standards for the aeronautical product, as a recorded in the type certificate data sheets.
Type Certificate
_______ _______ ________ is any defect, malfunction or failure of an aeronautical product affecting, or that id not corrected is likely to affect, the safety of the aircraft, it’s occupants, or any other person.
Division IX - Service Difficulty Reporting
Any part installed or intended for installation in a type certified aeronautical product , that was not manufactured or certified iaw the applicable regulations of the state of production.
Unapproved part
Who must report the defect?
Person who discovered the defects
An SDR is to be submitted to TC within ____ working days from the time the service difficulty was first discovered.
3
SDR interim report can be submitted by telephone, or other expedient means, to the local transport Canada regional office within that period. Such reports are to be followed by a complete report, IAW with the requirements of this subpart, within _____ days of the discovery of occurence.
14
To notify owners of unsafe conditions, non-conformance that affects airworthiness, and mandatory actions required for continues SAFE OPERATION.
Division X - Airworthiness Directives
Purpose of issuance
AD is mandatory. What if not complied?
C of A to be out of force
If an AD is issued in an aeronautical product installed on an amateur-built, owner maintained, is it mandatory to take actions?
NO, although TC advises owners to take these ADs into account
It is the responsibility of ____ _____ to ensure all applicable ADs are complied with.
aircraft owner