Callouts Flashcards
When to say what
400 ft
Call it and set a roll mode (LNAV or HDG select)
Positive rate
Bring gear up
Acceleration height
Set speed (flaps up speed)
Flaps and Gear up
Call for a pitch mode
Set Takeoff thrust
Takeoff initiated, TO/GA pushed
80 knots
called out by pm, pf says checked
continue
if you have a malfunction between 80 knots and V1 that is not a fire, engine failure, smoke in the flight station, or something that makes the plane unable or unsafe to fly
rotate
called by pm at vr. rotate 2-3 degrees every second, do not exceed 11 in order to avoid tail strike
positive rate
called by pm when altitude starts to increase. pf will call for gear up and pm will bring the gear up
400 feet
set roll mode. pf either will say set heading (orheading select xxx if not already engaged) or select lnav and will also say lnav engaged. Autopilot can also be engaged
acceleration height
sometimes pretty close to 1000 feet depending on where you are. pm calls it out, pf will then say set speed and flaps up speed will be entered in the mcp. pf will then say vnav engaged. flaps may also be moved at this point to up
landing checklist
called for when flaps are at their final setting for all landings
autopilot engaged
CMD a or b on, i have the mcp