CAE Communications Flashcards
On the audio control panel, what happens if the EMER / NORM switch is selected to the EMER position?
All audio is routed to the headset, the overhead speaker is deactivated, and the onside COMM is routed directly to the pilot
How is a failed NAV radio indicated on the MFD display?
The frequency is indicated in amber instead of green
What is the purpose of the 1/2 button on the display control panel (DCP)?
Enables cross-side radio tuning
To which functions does the CL30/35 MFD COM display provide control capability?
Squelch mode selection, COM test function, frequency tuning
The control display unit is one of two ways to control what?
COM radios, ATC transponders, ADF receivers, NAV frequencies
Where is the underwater locater device located?
Located on the CVR and FDR
To what does the CDU provide tuning control
Both the onside and cross-side radios
What does the CVR control panel contain
Headset jack, ERASE button, TEST button / green lamp
In which mode selection does the Mode S transponder report neither Mode C nor Mode S?
ALT OFF
In which areas are maintenance interphone panels located?
Forward and rear service panels
What conditions must be met to erase data from the cockpit voice recorder?
Parking brake set and hydraulic system powered
In which mode is the mode S transponder unable to send replies?
Standby mode
What indicates that a Nav radio has failed?
Frequencies are indicated in amber
What are the selectable modes in the ATC radio submenu?
TA/RA, TA ONLY, TEST, STBY
