Boilermaker Safety 34102-10 Practice Test Flashcards
Advanced steam boilers can operate at temperatures as high as _____ degrees.
1,150
Supercritical boilers can operate at pressures as high as _____ psi.
4,500
Cutting metals inside a boiler presents an added hazard due to ____.
Combustion residue fumes
Grinding operations inside a boiler present an explosion hazard due to ______.
Combustible gases
The weight of an object to be lifted should not exceed the _____ of the lifting equipment.
Safe working load
The term that means asbestos insulation is easily crumbled into fibers that become airborne is _____.
Friability
One of the places on a boiler where asbestos may be found is ______.
Door seals
One way of identifying insulation that may contain asbestos is through _________.
Testing by qualified personnel.
The hazards associated with hot work performed on areas coated with lead-based paint are minimized in the workplace by _______.
Performing an area survey prior to performing cutting or grinding operations.
Before entering a confined space, a worker should _____.
Inspect the space’s shoring and support
A boilermaker working at extreme heights must follow safety precautions not only to prevent falls but also to prevent causing ________.
Injury to personnel working below from falling objects
When welding with shielding gas, extra ventilation is needed due to the fact that the gas used ______.
Is heavier than air and collects in low areas.
When working at heights, _____ must be worn.
A safety harness
Suspended scaffolds are particularly useful when working on _________.
Boiler interiors
At the beginning of a shift, boilermakers are normally given a ________.
Safety briefing