B201.6 Safe Driving (12/04/2018) Flashcards
[B201.6 Safe Driving]
Who must ensure safe operation of the overhead doors?
The Company Officer
[B201.6 Safe Driving]
After arrival on scene, the vehicle lighting should be reduced to a level to:
Enhance scene safety
[B201.6 Safe Driving]
Who should assure the vehicle lighting is reduced to a level to enhance the scene safety?
The Company Officer and Driver
[B201.6 Safe Driving]
What 2 items will not be used for traffic control?
- PA system
- Spot lights
[B201.6 Safe Driving]
What must be set appropriately when the apparatus is parked on a roadway?
Traffic cones
[B201.6 Safe Driving]
What is the minimum lights to be used on the apparatus when parked on a road way?
4 way flashers
[B201.6 Safe Driving]
At all times during emergency response, the focus of all personnel shall be on the:
Safe movement of the vehicle
[B201.6 Safe Driving]
Headlight flashers will not be used between:
Dusk and Dawn
[B201.6 Safe Driving]
As a last resort, use this part of the roadway to pass drivers:
Shoulder
[B201.6 Safe Driving]
Who should account for all traffic in all lanes at a traffic light?
The driver and Company Officer
[B201.6 Safe Driving]
An apparatus shall not exceed ____ mph when using opposing lanes for passing drivers:
20 mph
[B201.6 Safe Driving]
When driving code-3, the apparatus may exceed the posted speed limit by ____ mph:
10 mph
[B201.6 Safe Driving]
Code 3 responses through school zones shall be at what speeds?
The posted school speed limit
[B201.6 Safe Driving]
When responding with multiple apparatus, it is important to know that traffic will focus on the:
First apparatus
[B201.6 Safe Driving]
Passing another emergency vehicle can only be done if:
The units are in direct radio contact with each other, and the passing vehicle receives permission from the apparatus to be passed
[B201.6 Safe Driving]
When on a public street, the backing guide shall wear a:
Traffic vest
[B201.6 Safe Driving]
What is the backing count that backing guides should give for stopping?
3, 2, 1, Stop
[B201.6 Safe Driving]
Before getting into position, the backing guide should survey what parts of the vehicle?
Top and right sides
[B201.6 Safe Driving]
When preparing to back the apparatus, who should confirm all doors and hatches are closed on the right side of the vehicle?
The driver
[B201.6 Safe Driving]
What can be used for backing if the headsets are not working?
Direct 16
[B201.6 Safe Driving]
Whose responsibility is it to make sure enough guides are used for safe movement?
The Company Officer
[B201.6 Safe Driving]
No fire apparatus should cross a bridge that has a load limit of less than the apparatus’s:
Gross Vehicle Weight
[B201.6 Safe Driving]
What (4) characteristics of the apparatus are posted in the cab for reference when determining clearance and load limits?
- Gross Vehicle Weight
- Length
- Height
- Kickout
[B201.6 Safe Driving]
Who is responsible for the deployment of spotters around electrical lines?
Company Officers
[B201.6 Safe Driving]
Company officers are responsible for implementing a pre-drive checklist that should at least include these 5 things:
- Chocks
- Overhead door clearance
- Compartment door security
- Seatbelts
- Response directions
[B201.6 Safe Driving]
Who is responsible for ensuring each station has a verifiable and repeatable pre-drive checklist in place?
BCs
[B201.6 Safe Driving]
All members who are approved to operate any type of AFD vehicle shall document within their company journal a minimum of ___ hours per year to maintain approval to drive:
24
[B201.6 Safe Driving]
If a driver training program is to be used for a member, who (2) will determine the substance of the training program?
- BC
- Shift Commander
