Autostart System

Question 0

What are the Primary and Backup sources for the Aircraft brakes?

Answer 0

Primary 28VDC

Backup Main battery

Question 1

Which condition does the Autostart system Not monitor during engine start ?

Answer 1

Insufficient Air Pressure for starter operation

Question 2

The Primary Engine indications on EICAS are:

Answer 2

TPR
N1
EGT

Question 3

How many attempts does the Autostart system make before aborting a ground start?

Answer 3

Two

Question 4

During ground starts, the autostart system monitors engine parameters and ABORTS the start for any of the following:

Answer 4

• loss of both starters
• no N1 rotation

Question 5

During ground starts, the autostart system monitors engine parameters and attempts to CORRECT the start for any of the following:

Answer 5

compressor stall
• hot start
• hung start
• loss of one starter
• no EGT rise
• start time exceeds the starterduty cycle timer

Question 6

During autostart, the EEC monitors what specific Engine parameters ?

Answer 6

During autostart, the EEC monitors EGT, N2 RPM, N3 RPM

Question 7

What are the two power sources that can provide starter power?

Answer 7

The APU and the forward external power.

Normally, APU power is used to drive the engine starters.

Question 8

What is initiated by selecting the battery switch to ON ?

Answer 8

The L CCR start up sequence

Question 9

For Engine Start the Oil temperature must be

Answer 9

Greater than - 40 * C