Approved_Document_R_Volume2_Flashcards
What is the purpose of Approved Document R Volume 2?
It provides guidance on high-speed-ready in-building physical infrastructure to support broadband services.
When did Approved Document R Volume 2 come into effect?
On 26 December 2022 for use in England.
What types of buildings does Approved Document R Volume 2 apply to?
New buildings and existing buildings undergoing major renovation works.
What is the primary goal of in-building physical infrastructure?
To ensure high-speed electronic communication networks can be installed in the future.
How does Approved Document R Volume 2 relate to Volume 1?
Volume 1 covers gigabit-ready infrastructure for new dwellings, while Volume 2 applies to other buildings.
What is the main requirement of R1?
To ensure new and renovated buildings are equipped with high-speed-ready in-building physical infrastructure.
What does in-building physical infrastructure refer to?
The facilities and systems required to install high-speed electronic communications networks, such as ducts and cabling routes.
Where must high-speed-ready infrastructure extend to?
From the access point to a network termination point inside the building.
What are the exemptions from requirement R1?
Listed buildings, conservation areas where compliance would alter appearance, and isolated buildings with no realistic access to high-speed networks.
What is the expected broadband speed for high-speed-ready infrastructure?
At least 30 Mbps.
What is a network termination point?
The location within a building where high-speed electronic communications networks terminate.
What is a common access point?
A central connection point in a multi-dwelling building to distribute broadband services.
What materials are recommended for ducting high-speed network cables?
PVC, steel, and other non-combustible materials that meet fire safety requirements.
Why is compliance with Part B of the Building Regulations important?
To ensure fire safety where network cables pass through compartment walls or floors.
What is the minimum broadband speed required for high-speed-ready infrastructure?
At least 30 Mbps.
What exemptions exist for providing in-building physical infrastructure?
Listed buildings, conservation areas where compliance would alter appearance, and isolated buildings.
How should developers future-proof buildings for broadband networks?
By installing ducts, conduits, and pathways to accommodate future fibre and copper connections.
What is the function of satellite and wireless technologies in broadband delivery?
To provide alternative high-speed connectivity where wired networks are unavailable.
What is the responsibility of building owners under Requirement R1?
To ensure the building is equipped with the necessary physical infrastructure for high-speed networks.
What is PAS 2016?
A Publicly Available Specification providing best practice guidance on broadband infrastructure in new buildings.
What is an ‘access point’?
A physical location where connection to the high-speed-ready in-building physical infrastructure is made available.
What is a ‘high-speed electronic communications network’?
A network capable of delivering broadband services at speeds of at least 30 Mbps.
What is ‘major renovation work’ in the context of Approved Document R?
Structural modifications that affect a significant part of the in-building physical infrastructure.
What is a ‘network termination point’?
The point at which an occupier connects to high-speed broadband services inside a building.
What is an ‘in-building physical infrastructure’?
The conduits, pathways, and spaces that enable the installation of high-speed network cables.
What is a ‘common access point’?
A shared infrastructure point in a multi-dwelling building that connects all units to the broadband network.
What does ‘service provider’s duct’ refer to?
The conduit that connects a building’s physical infrastructure to the broadband provider’s network.
What does ‘future-proofing’ mean in broadband infrastructure?
Designing buildings with adaptable infrastructure to accommodate future technological advancements.
What is a ‘distribution frame’?
A centralised hub for managing and distributing network connections within a building.
Why is a downward slope recommended for ducting entry points?
To prevent rainwater ingress and protect network termination points.
What is the Building Regulations 2010?
The primary legislation governing building standards in England, including broadband infrastructure.
What is PAS 2016?
A guideline on best practices for broadband infrastructure in new buildings.
What is the NHBC Foundation’s ‘The Connected Home’?
A report on smart home technology and future broadband needs.
Why is the Planning (Listed Buildings and Conservation Areas) Act 1990 relevant?
It regulates infrastructure modifications in historically significant buildings and areas.
What is the role of the Ancient Monuments and Archaeological Areas Act 1979?
It protects historic sites where broadband infrastructure modifications may be restricted.
Why is compliance with Part B (Fire Safety) important in broadband infrastructure?
To prevent the spread of fire where network cables penetrate walls and floors.
How does the NHBC Foundation guide support developers?
It provides recommendations for future-proofing homes with broadband infrastructure.
What are the main considerations in PAS 2016?
Guidance on network termination points, access points, and ducting standards.
What broadband standards must new buildings comply with?
They must ensure readiness for high-speed broadband with at least 30 Mbps capacity.
What document governs universal broadband service obligations?
The Electronic Communications (Universal Service) Order 2003.
