alignment setup procedure Flashcards
What should be confirmed before beginning the alignment setup?
The tires and all steering and suspension components must be serviceable
What is the first step in setting up the alignment?
Drive onto the alignment rack straight and adjust the ramps/turn plates to center them under the tires.
What is done with the hydraulic jacks during the first step?
Raise the tires off the rack so they can be rotated as part of the compensating process.
What is required to prevent the vehicle from rolling off the alignment rack?
Use chocks for the wheels.
What must be done with the wheel sensors?
Attach and calibrate the wheel sensors to each wheel as specified by the alignment equipment manufacturer.
Why is calibration of wheel sensors necessary?
To ensure accurate alignment readings and to account for possible wheel bends or unidentical sensor installations.
Does compensating for a bent wheel repair it?
No, compensating or calibrating does not correct the bent wheel; it may still cause vibration
Step #4 What must be done with the rack or turn plates in step 4?
Unlock all rack or turn plates
What is the purpose of jouncing the vehicle?
To allow the suspension to become centered.
hat should be determined in the final step?
Following the procedures for the alignment equipment, determine all alignment angles.
