AA320 2015 RTS Slides Flashcards
What does selecting the ENG MAN START pb ON do?
Opens the start valve.
When should the ENG MASTER 2 switch be selected ON?
When max motoring is achieved.
Why is it important to ensure waypoints are sequenced properly?
The lateral guidance and autopilot follow a blended signal derived from GPS, VOR, DME AND IRS, not raw data.
*Sequencing approach by scrolling through line 2&3 cause that only place you get the course and angles for descent
After gear down, why do we check the triple indicator?
To confirm normal system operation. When the Green System is normal, no brake pressure is indicated, you should only see the accumulator pressure (3000 psi)
When conducting RNAV visual or FMS/CVFP visual approaches, enter BARO altitude of ______ on the PERF APPR page.
300
The aircraft is certified for an engine-out CAT III Single approach (fail passive) and autoland provided engine-out procedures are completed prior to what altitude?
1000 feet AFL
What is the Maximum gear extension speed (Vlo)?
250 KIAS
Max gear retraction speed 220KIAS
What is the Non-Normal Methodology?
- Maintain aircraft control
- Identify the Non-normal
- Determine if Immediate Action or
ECAM Exception. - Accomplish Immediate Action Items
(If applicable) - Captain assigns Pilot Flying.
- Accomplish Non-Normal Procedure.
- Accomplish ECAM Follow-Up
Procedures (if applicable).
What is the Maximum Headwind for Automatic Approach, landing, and Roll out (including gusts):
Headwind (except A319 Shark)?
Headwind (A319 Shark)?
- 30 KTS
- 20 KTS (2 engines)
What is the Maximum Crosswind for Automatic Approach, Landing, and Roll out (including gusts) when visibility is less than 3/4mi or RVR less than. 4000feet?
15KTS
What is the difference between Manual Engine Start and Start Valve Manual Operation?
Manual Engine Start is used when the auto start system in inop or when auto system capabilities are degraded.
CA starts engines.
Start Valve Manual Operation is used when start valve control is inop. (Valve is opened with a wrench)
