70-410 - Server/Server Magner

Question 1

QUESTION 9
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2.Server1 and Server2 are part of a workgroup.
On Server1 and Server2, you create a local user account named Admin1.You add the account to the local Administrators group. On both servers, Admin1 has the same password.
You log on to Server1 as Admin1.You open Computer Management and vol.connect to Server2. When you attempt to create a scheduled task, view the event logs, and manage the shared folders, you receive Access Denied messages.
You need to ensure that you can administer Server2 remotely from Server1 by using Computer Management. What should you configure on Server2?
A. From Server Manager, modify the Remote Management setting.
B. From Local Users and Groups, modify the membership of the Remote Management Users group.
C. From Windows Firewall, modify the Windows Management Instrumentation (WMI) firewall rule.
D. From Registry Editor, configure the LocalAccountTokenFilterPolicy registry value.

Answer 1

D

Question 2

QUESTION 8
Your network contains an Active Directory domain named adatum.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
On a server named Corel, you perform a Server Core Installation of Windows Server 2012 R2.You join Corel to the adatum.com domain.
You need to ensure that you can use Event Viewer on Server1 to view the event logs on Corel.
What should you do on Corel?
A. Run the Enable-NetFirewallRulecmdlet.
B. Run the Disable-NetFirewallRulecmdlet.
C. Install Windows Management Framework.
D. Install Remote Server Administration Tools (RSAT).

Answer 2

A

Question 3

QUESTION 18
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
You create a security template named Template1 by using the Security Templates snap-in. You need to apply Template1 to Server2.
Which tool should you use?
A. Authorization Manager
B. Local Security Policy
C. Certificate Templates
D. System Configuration

Answer 3

B

Question 4

QUESTION 32
You have a server named Server1 that runs Windows Server 2012 R2. You plan to create a storage pool that will contain a new volume.
You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout.
What is the minimum number of 256-GB disks required for the storage pool?
A. 2 B. 3 C. 4 D. 5

Answer 4

C

Question 5

QUESTION 32
You have a server named Server1 that runs Windows Server 2012 R2. You plan to create a storage pool that will contain a new volume.
You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout.
What is the minimum number of 256-GB disks required for the storage pool?
A. 2 B. 3 C. 4 D. 5

Answer 5

C

Question 6

QUESTION 34
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1.Server1 runs Windows Server 2012 R2.
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account. How should you configure Service1?
A. From the Services console, configure the General settings.
B. From Windows PowerShell, run Set-Service and specify the -StartupType parameter.
C. From a command prompt, run sc.exe and specify the config parameter.
D. From a command prompt, run sc.exe and specify the privs parameter.

Answer 6

C

Question 7

QUESTION 43
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1.Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1. Which tool should you use?
A. New-StoragePool
B. Diskpart
C. File Server Resource Manager (FSRM) D. New-StorageSubsytemVirtualDisk

Answer 7

B

Question 8

QUESTION 46
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.A server named Server1 is configured to encrypt all traffic by using IPSec.
You need to ensure that Server1 can respond to ping requests from computers that do not support IPSec.
What should you do?
A. From a command prompt, run netsh set global autotuninglevel = highlyrestrictedcongestionprovider=none.
B. From a command prompt, run netsh set global autotuninglevel-restricted congestionprovider=ctcp.
C. From Windows Firewall with Advanced Security, allow unicast responses for the Domain Profile.
D. From Windows Firewall with Advanced Security, exempt ICMP from IPSec.

Answer 8

D

Question 9

QUESTION 47
You have a server named Server1 that runs Windows Server 2012 R2. You need to create a script that will create and mount a virtual hard disk.
Which tool should you use?
A. diskpart.exe B. vdsldr.exe C. fsutil.exe
D. vds.exe

Answer 9

A

Question 10

QUESTION 48
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has three physical network adapters named NIC1, NIC2, and NIC3.
On Server1, you create a NIC team named Team1 by using NIC1 and NIC2.You configure Team1 to accept network traffic on VLAN 10.
You need to ensure that Server1 can accept network traffic on VLAN 10 and VLAN 11. The solution must ensure that the network traffic can be received on both VLANs if a network adapter fails.
What should you do?
A. From Server Manager, change the load balancing mode of Team1.
B. Run the New-NetLbfoTeamcmdlet.
C. From Server Manager, add an interface to Team1.
D. Run the Add-NetLbfoTeamMembercmdlet.

Answer 10

C

Question 11

QUESTION 50
You have a server named Server1 that runs Windows Server 2012 R2.
On Server1, you open Computer Management as shown in the exhibit.(Click the Exhibit button.)
You need to ensure that you can create a 3-TB volume on Disk 1. What should you do first?
A. Create a storage pool.
B. Convert the disk to a GPT disk.
C. Convert the disk to a dynamic disk.
D. Create a VHD, and then attach the VHD.

Answer 11

B

Question 12

QUESTION 51
You have a server named Server1.Server1 runs Windows Server 2012 R2. Server1 has a thin provisioned disk named Disk1.
You need to expand Disk1.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
C. From Disk Management, extend the volume.
D. From Disk Management, delete the volume, create a new volume, and then format the volume.
E. From File and Storage Services, detach Disk1.

A. From File and Storage Services, extend Disk1.
B. From File and Storage Services, add a physical disk to the storage pool.

Answer 12

AB

Question 13

QUESTION 55
Your network contains an Active Directory domain named contoso.com. The network contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Server1 and Server2 are member servers.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install Remote Server Administration Tools on Server1.
B. Install Windows Management Framework 3.0 on Server2.
C. Install the Windows PowerShell 2.0 engine on Server1.
D. Install Microsoft .NET Framework 4 on Server2.
E. Install Remote Server Administration Tools on Server2.

Answer 13

BD

Question 14

QUESTION 60
You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2.
Server1 is configured to obtain an IPv4 address by using DHCP.
You need to configure the IPv4 settings of the network connection on Server1 as follows: IP address: 10.1.1.1
Subnet mask: 255.255.240.0
Default gateway: 10.1.1.254
What should you run?
A. netsh.exe
B. netcfg.exe C. msconfig.exe D. ipconfig.exe

Answer 14

A

Question 15

QUESTION 73
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 and a domain controller named DC2.All servers run Windows Server 2012 R2.All domain controllers are configured as DNS servers.
On Server1, you open Server Manager and you add DC2 as another server to manage.
From Server Manager on Server1, you right-click DC2 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when you right-click DC2, you see the option to run DNS Manager. What should you do?
A. On Server1, install the Role Administration Tools.
B. In the domain, add Server1 to the DNS Admins group.
C. On DC2 and Server1, run winrmquickconfig.
D. On DC2, install the Feature Administration Tools.

Answer 15

A

Question 16

QUESTION 75
Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3.
You create a server group named ServerGroup1.
You discover the error message shown in the following exhibit.(Click the Exhibit button.)
You need to ensure that Server2 can be managed remotely by using Server Manager. What should you do?
A. On DC1, run the Enable-PSSessionConfigurationcmdlet.
B. On Server2, run the Add-Computer cmdlet.
C. On Server2/ modify the membership of the Remote Management Users group.
D. From Active Directory Users and Computers, add a computer account named Server2, and then restart Server2.

Answer 16

C

Question 17

QUESTION 77
You have a server named Server1 that runs Windows Server 2012 R2.
You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails repeatedly.
You need to ensure that the feature can be installed on Server1. What should you do?
A. Install Windows Identity Foundation (WIF) 3.5.
B. Install the Web Server (IIS) server role.
C. Connect Server1 to the Internet.
D. Run the Add-AppxProvisionedPackagecmdlet.

Answer 17

C

Question 18

QUESTION 78
You have a server that runs Windows Server 2012 R2.
The disks on the server are configured as shown in the exhibit.(Click the Exhibit button.)
You need to create a storage pool that contains Disk 1 and Disk 2. What should you do first?
A. Convert Disk 1 and Disk 2 to GPT disks
B. Create a volume on Disk 2
C. Convert Disk 1 and Disk 2 to dynamic disks D. Delete volume E

Answer 18

D

Question 19

QUESTION 79
You have a server named Server1 that runs Windows Server 2012 R2. You add an additional disk to Server1 as shown in the exhibit.(Click the Exhibit button.)
You need to ensure that users can access the additional disk from drive C. What should you do?
A. Convert Disk 0 to a dynamic disk and add a mirror.
B. Create a simple volume on Disk 1 and mount the volume to a folder.
C. Convert Disk 0 and Disk 1 to dynamic disks and extend a volume. D. Convert Disk 1 to a dynamic disk and create a spanned volume.

Answer 19

B

Question 20

QUESTION 80
You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2 Datacenter.
You have a WIM file that contains the four images of Windows Server 2012 R2 as shown in the Images exhibit. (Click the Exhibit button.)
You review the installed features on Server1 as shown in the Features exhibit.(Click the Exhibit button.)
You need to install the Server Graphical Shell feature on Server1.
Which two possible sources can you use to achieve this goal?
(Each correct answer presents a complete solution. Choose two.)
A. Index 1
B. Index 2
C. Index 3
D. Index 4

Answer 20

BD

Question 21

QUESTION 82
You have a server named Server1 that runs Windows Server 2012 R2.
Server1 has following storage spaces: Data
Users Backups Primordial
You add an additional hard disk to Server1.
You need to identify which storage space contains the new hard disk. Which storage space contains the new disk?
A. Primordial B. Data
C. Users
D. Backups

Answer 21

A

Question 22

QUESTION 88
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed.
The disks on Server1 are configured as shown in the exhibit.(Click the Exhibit button.)
You create a virtual machine on Server1.
You need to ensure that you can configure a pass-through disk for the virtual machine. What should you do?
A. Convert Disk 1 to a GPT disk.
B. Delete partition E.
C. Convert Disk 1 to a dynamic disk.
D. Take Disk 1 offline.

Answer 22

D

Question 23

QUESTION 93
You plan to deploy a file server to a temporary location.
The temporary location experiences intermittent power failures.
The file server will contain a dedicated volume for shared folders.
You need to create a volume for the shared folders. The solution must minimize the likelihood of file corruption if a power failure occurs.
Which file system should you use?
A. NFS B. FAT32 C. ReFS D. NTFS

Answer 23

C

Question 24

QUESTION 95
You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.
You need to add a graphical user interface (GUI) to Server1. Which tool should you use?
A. The Install-WindowsFeaturecmdlet
B. The Install-Module cmdlet
C. The Install-RoleServicecmdlet
D. The setup.exe command

Answer 24

A

Question 25

QUESTION 96
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2.
Server2 establishes an IPSec connection to Server1.
You need to view which authentication method was used to establish the initial IPSec connection. What should you do?
A. From Windows Firewall with Advanced Security, view the quick mode security association.
B. From Event Viewer, search the Application Log for events that have an ID of 1704.
C. From Event Viewer, search the Security Log for events that have an ID of 4672.
D. From Windows Firewall with Advanced Security, view the main mode security association.

Answer 25

D

Question 26

QUESTION 98
Your network contains an Active Directory domain named contoso.com. All of the AppLocker policy settings for the member servers are configured in a Group Policy object (GPO) named GPO1.
A member server named Server1 runs Windows Server 2012 R2.
On Server1, you test a new set of AppLocker policy settings by using a local computer policy. You need to merge the local AppLocker policy settings from Server1 into the AppLocker policy settings of GPO1.
What should you do?
A. From Local Group Policy Editor on Server1, export an .inf file. Import the .inf file by using Group Policy Management Editor.
B. From Server1, run the Set-ApplockerPolicycmdlet.
C. From Local Group Policy Editor on Server1, export an .xml file. Import the .xml file by using Group Policy Management Editor.
D. From Server1, run the New-ApplockerPolicycmdlet.

Answer 26

B

Question 27

QUESTION 100
You have two servers named Server1 and Server2 that run Windows Server 2012 R2.Server1 and Server2 are part of a workgroup.
On Server1, you add Server2 to Server Manager.
When you attempt to connect to Server2 from Server Manager, you receive the following error message: “Credentials not valid.”
You need to ensure that you can manage Server2 from Server1 by using Server Manager on Server1. What should you do?
A. On Server 2, run the Configure-SmRemotingcmdlet.
B. On Server 1, run the Set-NetFirewallRulecmdlet.
C. On Server 1, run the Set-Item cmdlet.
D. On Server 2, install the Remote Server Administration Tools (RSAT).

Answer 27

A

Question 28

QUESTION 101
Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and a domain controller named DC2.All servers run Windows Server 2012 R2.
On DC2, you open Server Manager and you add Server1 as another server to manage.
From Server Manager on DC2, you right-click Server1 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when you right-click Server1, you see the option to run the DHCP console. What should you do?
A. In the domain, add DC2 to the DHCP Administrators group.
B. On Server1, install the Feature Administration Tools,
C. On DC2 and Server1, run winrmquickconfig. D. On DC2, install the Role Administration Tools.

Answer 28

D

Question 29

QUESTION 102
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1).Both servers are member servers.
On Server2, you install all of the software required to ensure that Server2 can be managed remotely from Server Manager.
You need to ensure that you can manage Server2 from Server1 by using Server Manager.
Which two tasks should you perform on Server2? (Each correct answer presents part of the solution.Choose two.)
A. Run the systempropertiesremotE. execommand.
B. Run the Fnable-PsRemotingcmdlet.
C. Run the Enable-PsSessionConfigurationcmdlet.
D. Run the Confiqure-SMRemoting.ps1script.
E. Run the Set-ExecutionPolicycmdlet.

Answer 29

DE

Question 30

QUESTION 103
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 that runs Windows Server 2012 R2.
On Server1, you create a work folder named Work1.
A user named User1 connects to Work1 from a computer named Computer1.
You need to identify the last time the documents in Work1 were synchronized successfully from Computer1. What should you do?
A. From Server Manager, review the properties of Computer1.
B. From Windows PowerShell, run the Get-SyncUserSettingscmdlet.
C. From Windows PowerShell, run the Get-SyncSharecmdlet.
D. From Server Manager, review the properties of User1.

Answer 30

D

Question 31

QUESTION 104
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2.
A user named User1 attempts to log on to DC1, but receives the error message shown in the exhibit.(Click the Exhibit button.)
You need to ensure that User1 can log on to DC1. What should you do?
A. Add User1 to the Remote Management Users group.
B. Grant User1 the Allow log on locally user right.
C. Modify the Logon Workstations setting of the User1 account.
D. Modify the Account is sensitive and cannot be delegated setting of the User1 account.

Answer 31

B

Question 32

QUESTION 108
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1.Server1 runs Windows Server 2012 R2.
You plan to create a shared folder. The shared folder will have a quota limit.
You discover that when you run the New Share Wizard, you cannot select the SMB Share - Advanced option. You need to ensure that you can use SMB Share - Advanced to create the new share.
What should you do on Server1 before you run the New Share Wizard?
A. Configure the Advanced system settings.
B. Run the Install-WindowsFeaturecmdlet.
C. Run the Set-SmbSharecmdlet.
D. Install the Share and Storage Management tool.

Answer 32

B

Question 33

QUESTION 111
You have a server named Server1 that runs Windows Server 2012 R2.
A network technician installs a new disk on Server1 and creates a new volume. The properties of the new volume are shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can restore files on volume D by using the Previous Versions tab What should you do first?
A. Install the File Server Resource Manager role service.
B. Convert the disk to a dynamic disk.
C. Run the convert.exe command. D. Format volume D.

Answer 33

D

Question 34

QUESTION 112
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
On a server named Server2, you perform a Server Core Installation of Windows Server 2012 R2.You join Server2 to the contoso.com domain.
You need to ensure that you can manage Server2 by using the Computer Management console on Server1. What should you do on Server2?
A. Install Windows Management Framework.
B. Run sconfig.exe and configure Remote Server Administration Tools (RSAT).
C. Install Remote Server Administration Tools (RSAT).
D. Run sconfig.exe and configure remote management.

Answer 34

D

Question 35

QUESTION 113
You have a server named Server1 that runs Windows Server 2012 R2. You connect three new hard disks to Server1.
You need to create a storage space that contains the three disks.
The solution must meet the following requirements:
Provide fault tolerance if a single disk fails.
Maximize the amount of files that can be stored in the storage space.
What should you create?
A. A mirrored space
B. A spanned volume
C. A parity space
D. A simple space

Answer 35

C

Question 36

QUESTION 122
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
You create and enforce the default AppLocker executable rules.
Users report that they can no longer execute a legacy application installed in the root of drive C. You need to ensure that the users can execute the legacy application.
What should you do?
A. Create a new rule.
B. Delete an existing rule.
C. Modify the action of the existing rules.
D. Add an exception to the existing rules.

Answer 36

A

Question 37

QUESTION 127
Your network contains an Active Directory forest named contoso.com. The forest contains five domains. All domain controllers run Windows Server 2012 R2.
The contoso.com domain contains two user accounts named Admin1 and Admin2.
You need to ensure that Admin1 and Admin2 can configure hardware and services on all of the member servers in the forest. The solution must minimize the number of privileges granted to Admin1 and Admin2.
Which built-in groups should you use?
A. Administrators local groups
B. Administrators domain local groups
C. Domain Admins global groups
D. Server Operators global groups

Answer 37

A

Question 38

QUESTION 130
You have a server named Server1 that runs Windows Server 2012 R2. You need to enable access-based enumeration for a file share on Server1. Which tool should you use?
A. File Server Resource Manager (FSRM)
B. Share and Storage Management
C. Server Manager D. File Explorer

Answer 38

C

Question 39

QUESTION 135
You have a server named Server1 that runs Windows Server 2012 R2.You add a 4-TB disk named Disk 5 to Server1.
You need to ensure that you can create a 3-TB volume on Disk 5. What should you do?
A. Create a storage pool.
B. Convert the disk to a GPT disk.
C. Convert the disk to a dynamic disk.
D. Create a VHD, and then attach the VHD.

Answer 39

B

Question 40

QUESTION 138
Your network contains three servers that run Windows Server 2012 R2. The servers are configured as shown in the following table.
Server3 is configured to obtain an IP address automatically.
You need to prevent Server3 from receiving an IP address from Server1. What should you create on Server1?
A. An exclusion
B. A scope option
C. A filter
D. A reservation

Answer 40

C

Question 41

QUESTION 142
You have a server named Server1 that runs Windows Server 2012 R2.
You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails repeatedly.
You need to ensure that the feature can be installed on Server1. What should you do?
A. Run the Add-WindowsPackagecmdlet.
B. Disable User Account Control (UAC).
C. Specify an alternate source path.
D. Install the Web Server (IIS) server role.

Answer 41

C

Question 42

QUESTION 143
You have a server named Server2 that runs Windows Server 2012 R2.
A network technician installs a new disk on Server2 and creates a new volume.
The properties of the new volume are shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can enable NTFS disk quotas for volume D. What should you do first?
A. Format volume D
B. Install the File Server Resource Manager role service
C. Run the convert.exe command
D. Convert the disk to a dynamic disk

Answer 42

A

Question 43

QUESTION 148
Your network contains an Active Directory domain named contoso.com.
You install Windows Server 2012 R2 on a new server named Server1 and you join Server1 to the domain.
You need to ensure that you can view processor usage and memory usage information in Server Manager. What should you do?
A. From Server Manager, click Configure Performance Alerts.
B. From Performance Monitor, create a Data Collector Set (DCS).
C. From Performance Monitor, start the System Performance Data Collector Set (DCS).
D. From Server Manager, click Start Performance Counters.

Answer 43

D

Question 44

QUESTION 149
Your network contains an Active Directory domain named contoso.com. The domain contains three member servers.
The servers are configured as shown in the following table.
All client computers run Windows 8. All client computers receive updates from Server2.
On Server3, you add a shared printer named Printer1. Printer1 uses a Type 4 driver that is not included in the Windows 8 installation media.
You need to ensure that when users connect to the printer for the first time, the printer driver is installed automatically on their client computer.
What should you do?
A. From the Windows Deployment Services console on Server1, add the driver package for Printer1.
B. From Windows PowerShell on Server3, run the Add-PrinterDrivercmdlet.
C. From the Print Management console on Server3, add additional drivers for Printer1.
D. From the Update Services console on Server2, import and approve updates.

Answer 44

D

Question 45

QUESTION 150
Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table.
You need to ensure that you can use Server Manager on DC1 to manage DC2.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Install Microsoft .NET Framework 4 on DC2.
B. Install Remote Server Administration Tools on DC1.
C. Install the Windows PowerShell 2.0 engine on DC1.
D. Install Remote Server Administration Tools on DC2.
E. Install Windows Management Framework 3.0 on DC2.

Answer 45

AE

Question 46

QUESTION 165
Your network contains an Active Directory domain named adatum.com. The domain contains a file server named Server2 that runs Windows Server 2012 R2. Server2 contains a shared folder named Home. Home
contains the home folder of each user.
All users have the necessary permissions to access only their home folder.
A user named User1 opens the Home share as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that all users see only their own home folder when they access Home. What should you do from Server2?
A. From Server Manager, modify the properties of Home.
B. From Windows Explorer, modify the properties of the volume that contains Home.
C. From Server Manager, modify the properties of the volume that contains Home.
D. From Windows Explorer, modify the properties of Home.

Answer 46

B

Question 47

QUESTION 166
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2012 R2 and has the File and Storage Services server role installed.
On Server1, you create a share named Documents.
You need to ensure that users can recover files that they accidently delete from Documents.
What should you do?
A. Enable shadow copies by using Computer Management.
B. Create a storage pool that contains a two-way mirrored volume by using Server Manager.
C. Modify the Startup type of the Volume Shadow Copy Service (VSS) by using the Services console.
D. Create a recovery partition by using Windows Assessment and Deployment Kit (Windows ADK).

Answer 47

A

Question 48

QUESTION 167
You have a laptop named Computer1. Computer1 runs Windows 8 Enterprise.
Computer1 has a wired network adapter and a wireless network adapter. Computer1 connects to a wireless network named Network1.
For testing purposes, you install Windows Server 2012 R2 on Computer1 as a second operating system. You install the drivers for the wireless network adapter.
You need to ensure that you can connect to Network1 from Windows Server 2012 R2. What should you do?
A. Restart the WLAN AutoConfig service.
B. From a local Group Policy object (GPO), configure the Wireless Network (IEEE 802.11) Policies settings.
C. From a local Group Policy object (GPO), configure the settings of Windows Connection Manager.
D. From Server Manager, install the Wireless LAN Service feature.

Answer 48

D

Question 49

QUESTION 170
You have a server named Server2 that runs Windows Server 2012 R2. Server2 has the Hyper-V server role installed.
The disks on Server2 are configured as shown in the exhibit. (Click the Exhibit button.)
You create a virtual machine on Server2 named VM1.
You need to ensure that you can configure a pass-through disk for VM1. What should you do?
A. Convert Disk 1 to a basic disk.
B. Create a partition on Disk 1.
C. Take Disk 1 offline.
D. Convert Disk 1 to a MBR disk.

Answer 49

C

Question 50

QUESTION 171
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention. The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Stop Action C. Automatic Start Action D. Integration Services

Answer 50

B

Question 51

QUESTION 175
You have a file server named Server1 that runs Windows Server 2012 R2. Server1 contains a folder named Folder1.
You share Folder1 as Share1 by using Advanced Sharing. Access-based enumeration is enabled. Share1 contains an application named Appl.exe.
You configure the NTFS permissions on Folder1 as shown in the following table. The members of Group2 report that they cannot make changes to the files in Share1. The members of Group1 and Group2 run Appl.exe successfully.
You need to ensure that the members of Group2 can edit the files in Share1.
What should you do?
A. Replace the NTFS permissions on all of the child objects.
B. Edit the Share permissions.
C. Edit the NTFS permissions.
D. Disable access-based enumeration.

Answer 51

B

Question 52

QUESTION 182
You have a server named Server1 that has a Server Core installation of Windows Server 2008 R2. Server1 has the DHCP Server server role and the File Server server role installed.
You need to upgrade Server1 to Windows Server 2012 R2 with the graphical user interface (GUI).
The solution must meet the following requirements: Preserve the server roles and their configurations. Minimize administrative effort.
What should you do?
A. OnServer1, run setup.exe from the Windows Server 2012 R2 installation media and select Server Core Installation. When the installation is complete, add the Server Graphical Shell feature.
B. OnServer1, run setup.exe from the Windows Server 2012 R2 installation media and select Server with a GUI.
C. Start Server1 from the Windows Server 2012 R2 installation media and select Server with a GUI.
D. Start Server1 from the Windows Server 2012 R2 installation media and select Server Core Installation. When the installation is complete, add the Server Graphical Shell feature.

Answer 52

D

Question 53

QUESTION 190
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1 that runs Windows Server 2012 R2. Server1 contains a shared folder named Share1. Share1 contains the home folder of each user.
All users have the necessary permissions to access only their home folder.
The users report that when they access Share1, they can see the home folders of all the users. You need to ensure that the users see only their home folder when they access Share1.
What should you do from Server1?
A. From Windows Explorer, modify the properties of the volume that contains Share1.
B. From Server Manager, modify the properties of the volume that contains Share1.
C. From Server Manager, modify the properties of Share1. D. From Windows Explorer, modify the properties of Share1.

Answer 53

A

Question 54

QUESTION 191
You have a server named Server1Server1 runs Windows Server 2012 R2 and has the File and Storage Services server role installed.
You attach four 500-GB disks to Server1.
You need to configure the storage to meet the following requirements:
Storage for an application named Application1 must be provided. Application1 requires 20 GB and will require a maximum of 800 GB in three years.
Storage for an application named Application2 must be provided. Application2 requires 20 GB and will require a maximum of 900 GB in three years.
The solution must provide the ability to dynamically add storage without requiring configuration changes to the applications.
The storage must be available if a single disk fails.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. From File and Storage Services, create virtual disks by using fixed provisioning.
B. From Fife and Storage Services, create virtual disks by using thin provisioning.
C. From File and Storage Services, create a storage pool that uses all four disks.
D. From Disk Management, create a new RA1D-5 volume that uses all four disks.
E. From Disk Management, create two new mirror volumes that use two disks each.

Answer 54

AC

Question 55

QUESTION 192
You have a server named Server1 that runs Windows Server 2012 R2.
You try to install the Microsoft .NET Framework 3.5 Features feature on Server1, but the installation fails repeatedly.
You need to ensure that the feature can be installed on Server1. What should you do?
A. Run the Add-AppxProvisionedPackagecmdlet.
B. Remove the .NET Framework 4.5 Features feature.
C. Connect Server1 to the Internet.
D. Install the Web Server (IIS) server role.

Answer 55

C

Question 56

QUESTION 197
You have a server named Server1 that runs Windows Server 2012 R2.
You need to remove Windows Explorer, Windows Internet Explorer, and all related components and files from Server1.
What should you run on Server1?
A. msiexec.exe /uninstall explorer.exe /x
B. msiexec.exe /uninstall iexplore.exe /x
C. Uninstall-WindowsFeature Desktop-Experience -Remove
D. Uninstall-WindowsFeature Server-Gui-Shell Remove

Answer 56

D

Question 57

QUESTION 198
You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2. You attach a 4-TB disk to Server1.
The disk is configured as an MBR disk. You need to ensure that you can create a 4-TB volume on the disk. Which Diskpart command should you use?
A. Expand
B. Attach
C. Automount D. Convert

Answer 57

D

Question 58

QUESTION 203
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has five network adapters. Three of the network adapters are connected to a network named LAN1. The two other network adapters are connected to a network named LAN2.
You need to create a network adapter team from the three network adapters connected to LAN1. Which tool should you use?
A. Network Load Balancing Manager
B. Network and Sharing Center
C. Routing and Remote Access
D. Server Manager

Answer 58

D

Question 59

QUESTION 209
Your network contains an Active Directory domain named contoso.com. The domain contains an application server named Server1. Server1 runs Windows Server 2012 R2.
You have a client application named App1 that communicates to Server1 by using dynamic TCP ports. On Server1, a technician runs the following command:
New-NetFirewallRule -DisplayNameAllowDynamic -Direction Outbound -LocalPort 1024- 65535 -Protocol TCP. Users report that they can no longer connect to Server1 by using Appl.
You need to ensure that App1 can connect to Server1. What should you run on Server1?
A. Set-NetFirewallRule -DisplayNameAllowDynamic -Action Allow
B. netshadvfirewall firewall add rule name=allowdynamic action-allow
C. netshadvfirewall firewall set rule name-allowdynamic new action- allow
D. Set-NetFirewallRule -DisplayNameAllowDynamic -Direction Inbound

Answer 59

D

Question 60

QUESTION 214
You have a file server named Server1 that runs Windows Server 2012 R2.
You need to ensure that a user named User1 can use Windows Server Backup to create a complete backup of Server1.
What should you configure?
A. The local groups by using Computer Management
B. The Role Assignment by using Authorization Manager
C. A task by using Authorization Manager
D. The User Rights Assignment by using the Local Group Policy Editor

Answer 60

A

Question 61

QUESTION 54
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2.
You log on to Server1.
You need to retrieve a list of the active TCP connections on Server2. Which command should you run from Server1?
A. winrm get server2
B. netstat> server2
C. dsquery * -scope base -attrip,server2
D. winrs -r:server2netstat

Answer 61

D

Question 62

QUESTION 132
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. The domain contains a standalone server named Server2 that is located in a perimeter network. Both servers run Windows Server 2012 R2.
You need to manage Server2 remotely from Server1. What should you do?
A. From Server1, run the Enable-PsRemotingcmdlet.
B. From Server2, run the winrm command.
C. From Server2/ run the Enable-PsRemotingcmdlet.
D. From Server1, run the winrm command.

Answer 62

D

Question 63

QUESTION 184
You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2 Standard. You establish a Remote Desktop session to Server1.
You need to identify which task can be performed on Server1 from within the Remote Desktop session. What should you identify?
A. Install a feature by using Server Manager.
B. Modify the network settings by using Sconfig.
C. Disable services by using Msconfig.
D. Join a domain by using the System Properties.

Answer 63

B

Question 64

QUESTION 185
You have a server named Server1. Server1 runs Windows Server 2012 R2 and is located in a perimeter network.
You need to configure a custom connection security rule on Server1. The rule must encrypt network communications across the Internet to a computer at another company.
Which authentication method should you configure in the connection security rule?
A. Advanced
B. User (Kerberos V5)
C. Default
D. Computer (Kerberos V5)
E. Computer and user (Kerberos V5)

Answer 64

A