70-410 - Networking Flashcards
QUESTION 17
Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8.
You deploy a server named Server1 that runs Windows Server 2012 R2.
You install a new client-server application named App1 on Server1 and on the client computers. The client computers must use TCP port 6444 to connect to App1 on Server1.Server1 publishes the information of App1 to an intranet server named Server2 by using TCP port 3080.
You need to ensure that all of the client computers can connect to App1. The solution must ensure that the application can connect to Server2.
Which Windows Firewall rule should you create on Server1?
A. An outbound rule to allow a connection to TCP port 3080
B. An inbound rule to allow a connection to TCP port 3080
C. An outbound rule to allow a connection to TCP port 6444
D. An inbound rule to allow a connection to TCP port 6444
D
QUESTION 16
Your network contains an Active Directory domain named contoso.com. The domain contains an application server named Server1.Server1 runs Windows Server 2012 R2.
Server1 is configured as an FTP server.
Client computers use an FTP application named App1.exE. App1.exe uses TCP port 21 as the control port and dynamically requests a data port.
On Server1, you create a firewall rule to allow connections on TCP port 21.
You need to configure Server1 to support the client connections from App1.exE. What should you do?
A. Run netshadvfirewall set global statefulftp enable.
B. Run netsh firewall addportopening TCP 21 dynamicftp.
C. Create an inbound firewall rule to allow App1.exe.
D. Create an isolation connection security rule.
A
QUESTION 22
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1 that runs Windows Server 2012 R2.
You create a DHCP scope named Scope1. The scope has a start address of 192.168.1.10, an end address of 192.168.1.50, and a subnet mask of 255.255.255.192.
You need to ensure that Scope1 has a subnet mask of 255.255.255.0.
A. From the DHCP console, reconcile Scope1.
B. From the DHCP console, delete Scope1.
C. From the DHCP console, modify the Scope Options of Scope1.
D. From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet.
B
QUESTION 23
Your company has a main office and two branch offices. The offices connect to each other by using a WAN link.
In the main office, you have a server named Server1 that runs Windows Server 2012 R2. Server1 is configured to use an IPv4 address only.
You need to assign an IPv6 address to Server1. The IP address must be private and routable. Which IPv6 address should you assign to Server1?
A. 2001:ab32:145c::32cc:401b
B. ff00:3rff:65df:145c:dca8::82a4 C. fd00:ab32:14:ad88:ac:58:abc2:4 D. fe80:ab32:145c::32cc:401b
C
QUESTION 45
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. You create a new inbound rule by using Windows Firewall with Advanced Security.
You need to configure the rule to allow Server1 to accept unsolicited inbound packets that are received through a network address translation (NAT) device on the network.
Which setting in the rule should you configure?
A. Interface types
B. Authorized computers
C. Remote IP address
D. Edge traversal
D
QUESTION 46
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2.A server named Server1 is configured to encrypt all traffic by using IPSec.
You need to ensure that Server1 can respond to ping requests from computers that do not support IPSec. What should you do?
A. From a command prompt, run netsh set global autotuninglevel = highlyrestrictedcongestionprovider=none.
B. From a command prompt, run netsh set global autotuninglevel-restricted congestionprovider=ctcp.
C. From Windows Firewall with Advanced Security, allow unicast responses for the Domain Profile.
D. From Windows Firewall with Advanced Security, exempt ICMP from IPSec.
D
QUESTION 58
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server 1.Server1 runs Windows Server 2012 R2 and has the DHCP Server server role installed.
You create two IPv4 scopes on Server1. The scopes are configured as shown in the following table.
The DHCP clients in Subnet_Tor can connect to the client computers in Subnet_Mtl by using an IP address or a FQDN. You discover that the DHCP clients in Subnet_Mtl can connect to client computers in Subnet_Tor by using an IP address only.
You need to ensure that the DHCP clients in both subnets can connect to any other DHCP client by using a FQDN.
What should you add?
A. The 006 DNS Servers option to Subnet_Mtl
B. The 006 DNS Servers option to Subnet_Tor
C. The 015 DNS Domain Name option to Subnet_Mtl D. The 015 DNS Domain Name option to Subnet_Tor
A
QUESTION 60
You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2.
Server1 is configured to obtain an IPv4 address by using DHCP.
You need to configure the IPv4 settings of the network connection on Server1 as follows: IP address: 10.1.1.1
Subnet mask: 255.255.240.0
Default gateway: 10.1.1.254
What should you run?
A. netsh.exe
B. netcfg.exe C. msconfig.exe D. ipconfig.exe
A
QUESTION 85
Your company has a main office and four branch offices. The main office contains a server named Server1 that runs Windows Server 2012 R2.
The IP configuration of each office is configured as shown in the following tablE.
You need to add a single static route on Server1 to ensure that Server1 can communicate with the hosts on all of the subnets.
Which command should you run?
A. route.exe add -p 10.10.0.0 mask 255.255.252.0 10.10.0.1
B. route.exe add -p 172.16.16.0 mask 255.255.252.0 10.10.0.1
C. route.exe add -p 10.10.0.0 mask 255.255.252.0 172.16.0.0
D. route.exe add -p 172.16.18.0 mask 255.255.252.0 10.10.0.1
B
QUESTION 115 You are configuring the IPv6 network infrastructure for a branch office. The corporate network administrator allocates the 2001:DB8:0:C000::/58 address space for use in the branch office. You need to identify the maximum number of IPv6 subnets you can create. How many IPv6 subnets should you identify? A. 32 B. 64 C. 128 D. 1024
B
QUESTION 131
Your network contains a file server named Server1 that runs Windows Server 2012 R2.All client computers run Windows 8.
You need to ensure that when users are connected to the network, they always use local offline files that are cached from Server1.
Which Group Policy setting should you configure?
A. Configure Slow link speed.
B. Turn on economical application of administratively assigned Offline Files.
C. Configure slow-link mode.
D. Enable file synchronization on costed networks.
C
QUESTION 152
You have two servers named Server1 and Server2. Both servers run Windows Server 2012 R2. The servers are configured as shown in the following table.
The routing table for Server1 is shown in the Routing Table exhibit. (Click the Exhibit button.)
From Server1, you attempt to ping Server2, but you receive an error message as shown in the Error exhibit. {Click the Exhibit button.)
You need to ensure that you can successfully ping Server2 from Server1. What should you do on Server1?
A. Disable Windows Firewall.
B. Modify the subnet mask.
C. Modify the DNS settings.
D. Modify the default gateway settings.
D
QUESTION 154
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
You create an external virtual switch named Switch1. Switch1 has the following configurations: Connection type: External network
Single-root I/O virtualization (SR-IOV): Enabled
Ten virtual machines connect to Switch1.
You need to ensure that all of the virtual machines that connect to Switch1 are isolated from the external network and can connect to each other only. The solution must minimize network downtime for the virtual machines.
What should you do?
A. Remove Switch1 and recreate Switch1 as an internal network.
B. Change the Connection type of Switch1 to Private network.
C. Change the Connection type of Switch1 to Internal network.
D. Remove Switch1 and recreate Switch1 as a private network.
B
QUESTION 179
You install Windows Server 2012 R2 on a standalone server named Server1. You configure Server1 as a VPN server.
You need to ensure that client computers can establish PPTP connections to Server1.
Which two firewall rules should you create? (Each correct answer presents part of the solution. Choose two.)
A. An outbound rule for TCP port 1701
B. An inbound rule for TCP port 1723
C. An inbound rule for protocol 47
D. An outbound rule for protocol 47
E. An outbound rule for TCP port 1723
BC
QUESTION 180
Your network contains two subnets. The subnets are configured as shown in the following table.
You have a server named Server1 that runs Windows Server 2012 R2. Server1 is connected to LAN1. You run the route print command as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that Server1 can communicate with the client computers on LAN2. What should you do?
A. Change the default gateway address.
B. Set the state of the Microsoft ISATAP Adapter #2 interface to disable.
C. Change the metric of the 10.10.1.0 route.
D. Set the state of the Teredo interface to disable.
A
