Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

70-410 > 70-410 Hyper-V > Flashcards

70-410 Hyper-V Flashcards

1
Q

QUESTION 3
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.Server1 has the virtual switches listed in the following rk adapters. One network adapter connects to vSwitch1. The other network adapter connects to vSwitch2.You configure NIC teaming on VM1.
You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the network.

Bet What should you do on Server1?
A. Run the Set-VmNetworkAdaptercmdlet.
B. Add a new network adapter to VM1.
C. Create a new virtual switch on Server 1.
D. Modify the properties of vSwitch1 and vSwitch2.

A

A

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

QUESTION 4
Your network contains two Hyper-V hosts that run Windows Server 2012 R2. The Hyper-V hosts contains several virtual machines that run Windows Server 2012 R2. You install the Network Load Balancing feature on the virtual machines. You need to configure the virtual machines to support Network Load Balancing (NLB).
Which virtual machine settings should you configure?
A. DHCP guard
B. Port mirroring
C. Router guard
D. MAC address

A

D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

QUESTION 5
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 is connected to two Fibre Channel SANs and is configured as shown in the following table. You have a virtual machine named VM1. You need to configure VM1 to connect to SAN1. What should you do first?
A. Create a Virtual Fibre Channel SAN.
B. Create a Hyper-V virtual switch.
C. Add one HBA.
D. Configure network adapter teaming. Correct Answer:

A

A

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

QUESTION 6
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1.Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. On Server1, you create and start a virtual machine named VM1.VM1 is configured as shown in the following table. You need to recommend a solution to minimize the amount of disk space used for the checkpoint of VM1.
What should you do before you create the checkpoint?
A. Run the Resize-VHD cmdlet.
B. Convert Disk1.vhd to a dynamically expanding disk.
C. Shut down VM1.
D. Run the Convert-VHD cmdlet.

A

B

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q 
QUESTION 10 
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table. You install Windows Server 2012 R2 on VM2 by using Windows Deployment Services (WDS). You need to ensure that the next time VM2 restarts, you can connect to the WDS server by using PXE. 
Which virtual machine setting should you configure for VM2? 
A. NUMA topology
B. Resource control 
C. resource metering 
D. virtual Machine Chimney 
E. The VLAN ID 
F. Processor Compatibility 
G. The startup order 
H. Automatic Start Action 
I. Integration Services 
J. Port mirroring 
K. Single-root I/O virtualization
A

G

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q 
QUESTION 11 
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table. You plan to schedule a complete backup of Server1 by using Windows Server Backup. You need to ensure that the state of VM1 is saved before the backup starts. What should you configure?
A. NUMA topology
B. Resource control 
C. resource metering 
D. virtual Machine Chimney 
E. The VLAN ID 
F. Processor Compatibility 
G. The startup order 
H. Automatic Start Action 
I. Integration Services 
J. Port mirroring 
K. Single-root I/O virtualization
A

I

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q 
QUESTION 13
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table. You need to ensure that VM1 can use more CPU time than the other virtual machines when the CPUs on Server1 are under a heavy load. 
What should you configure? 
A. NUMA topology
B. Resource control 
C. resource metering 
D. virtual Machine Chimney 
E. The VLAN ID 
F. Processor Compatibility 
G. The startup order 
H. Automatic Start Action 
I. Integration Services 
J. Port mirroring 
K. Single-root I/O virtualization
A

B

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q 
QUESTION 12
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table. VM2 sends and receives large amounts of data over the network. You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition. 
What should you configure? 
A. NUMA topology
B. Resource control 
C. resource metering 
D. virtual Machine Chimney 
E. The VLAN ID 
F. Processor Compatibility 
G. The startup order 
H. Automatic Start Action 
I. Integration Services 
J. Port mirroring 
K. Single-root I/O virtualization
A

K

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q 
QUESTION 39 
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1
is configured as shown in the following table. You install a network monitoring application on VM2. You need to ensure that all of the traffic sent to VM3 can be captured on VM2. 
What should you configure? 
A. NUMA topology 
B. Resource control 
C. Resource metering 
D. Virtual Machine Chimney 
E. The VLAN ID 
F. Processor Compatibility 
G. The startup order 
H. Automatic Start Action 
I. Integration Services 
J. Port mirroring 
K. Single-root I/O virtualization
A

J

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

QUESTION 40
You have a Hyper-V host named Host1 that connects to a SAN by using a hardware Fibre Channel adapter. Host1 contains two virtual machines named VM1 and VM2. You need to provide VM1 with direct access to the SAN. VM2 must not require access to the SAN.
Which two configurations should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. On VM1, configure a Fibre Channel adapter.
B. On Host1, configure a new virtual switch.
C. On VM1, add a network adapter.
D. On Host1, configure a new Virtual Fibre Channel SAN.
E. On Host1, modify the Hyper-V settings.

A

AD

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

QUESTION 41
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. VM1 has several snapshots. You need to modify the snapshot file location of VM1.
What should you do?
A. Right-click VM1, and then click Export…
B. Shut down VM1, and then modify the settings of VM1.
C. Delete the existing snapshots, and then modify the settings of VM1. D. Pause VM1, and then modify the settings of VM1.

A

C

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q 
QUESTION 42 
You have virtual machine named VM1. VM1 uses a fixed size virtual hard disk (VHD) named Disk1.vhD. Disk1.vhd is 200 GB. You shut down VM1. You need to reduce the size of Disk1.vhD.
Which action should you select from the Edit Virtual Hard Disk Wizard?
A. Shrink 
B. compact 
C. Merge 
D. Convert
A

D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

QUESTION 43
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1.Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1. Which tool should you use?
A. New-StoragePool
B. Diskpart
C. File Server Resource Manager (FSRM) D. New-StorageSubsytemVirtualDisk

A

B

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

QUESTION 44
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. On Server1, you create a virtual machine named VM1.VM1 has a legacy network adapter. You need to assign a specific amount of available network bandwidth to VM1. What should you do first?
A. Add a second legacy network adapter, and then run the Set-VMNetworkAdaptercmdlet.
B. Add a second legacy network adapter, and then configure network adapter teaming.
C. Remove the legacy network adapter, and then run the Set-VMNetworkAdaptercmdlet.
D. Remove the legacy network adapter, and then add a network adapter.

A

D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

QUESTION 47
You have a server named Server1 that runs Windows Server 2012 R2. You need to create a script that will create and mount a virtual hard disk.
Which tool should you use?
A. diskpart.exe
B. vdsldr.exe
C. fsutil.exe
D. vds.exe

A

A

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

QUESTION 76
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.Server1 is configured as shown in the following table.
VM3 is used to test applications.
You need to prevent VM3 from synchronizing its clock to Server1.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O visualization

A

I

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

QUESTION 88
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed.
The disks on Server1 are configured as shown in the exhibit.(Click the Exhibit button.)
You create a virtual machine on Server1.
You need to ensure that you can configure a pass-through disk for the virtual machine.
What should you do?
A. Convert Disk 1 to a GPT disk.
B. Delete partition E.
C. Convert Disk 1 to a dynamic disk.
D. Take Disk 1 offline.

A

D

18
Q

QUESTION 89
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1.Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1. Which tool should you use?
A. Share and Storage Management
B. New-StoragePool
C. New-VirtualDisk
D. Diskpart

A

D

19
Q

QUESTION 106
You have a new server named Server1 that runs Windows Server 2012 R2.
Server1 has two dual-core processors and 32 GB of RAM.
You install the Hyper-V server role on Server1.
You create two virtual machines on Server1 that each have 8 GB of memory.
You need to minimize the amount of time it takes for both virtual machines to access memory.
What should you configure on each virtual machine?
A. Resource control
B. Memory weight
C. Dynamic Memory
D. NUMA topology

A

D

20
Q

QUESTION 107
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2. VM1 has several snapshots.
You need to modify the snapshot file location of VM1.
What should you do?
A. Delete the existing snapshots, and then modify the settings of VM1.
B. Right-click VM1, and then click Move. ..
C. Right-click VM1, and then click Export…
D. PauseVM1, and then modify the settings of VM1.

A

A

21
Q

QUESTION 116
Your network contains a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
You create a checkpoint of VM1, and then you install an application on VM1.You verify that the application runs properly.
You need to ensure that the current state of VM1 is contained in a single virtual hard disk file. The solution must minimize the amount of downtime on VM1.
What should you do?
A. From a command prompt, run dism.exe and specify the /delete-image parameter.
B. From a command prompt, run dism.exe and specify the /commit-image parameter.
C. From Hyper-V Manager, delete the checkpoint.
D. From Hyper-V Manager, inspect the virtual hard disk.

A

C

22
Q

QUESTION 117
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 has a virtual switch named RDS Virtual.
You replace all of the network adapters on Server1 with new network adapters that support single-root I/O visualization (SR-IOV).
You need to enable SR-IOV for all of the virtual machines on Server1.
Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. On each virtual machine, modify the Advanced Features settings of the network adapter.
B. Modify the settings of the RDS Virtual virtual switch.
C. On each virtual machine, modify the BIOS settings.
D. Delete, and then recreate the RDS Virtual virtual switch.
E. On each virtual machine, modify the Hardware Acceleration settings of the network adapter.

A

DE

23
Q

QUESTION 118
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.Server1 contains a virtual machine named VM1 that runs Windows Server 2012 R2.
You need to ensure that a user named User1 can install Windows features on VM1. The solution must minimize the number of permissions assigned to User1.
To which group should you add User1?
A. Hyper-V Administrators on Server1
B. Administrators on VM1
C. Server Operators on Server1
D. Power Users on VM1

A

B

24
Q

QUESTION 119
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2 Datacenter.Server1 is located in an isolated network that cannot access the Internet.
On Server1, you install a new virtual machine named VM1.VM1 runs Windows Server 2012 R2 Essentials and connects to a private virtual network.
After 30 days, you discover that VM1 shuts down every 60 minutes.
You need to resolve the issue that causes VM1 to shut down every 60 minutes.
What should you do?
A. OnVM1, run slmgr.exe and specify the /ipk parameter.
B. OnServer1, run slmgr.exe and specify the /rearm-sku parameter.
C. Create a new internal virtual network and attach VM1 to the new virtual network.
D. On Server1, run Add-WindowsFeatureVolumeActivation.

A

A

25
Q

QUESTION 129
Your network contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.Server1 is configured as shown in the following table.
You need to configure VM4 to track the CPU, memory, and network usage.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization

A

C

26
Q

QUESTION 133
You have a server named Corel that has a Server Core Installation of Windows Server 2012 R2.
Corel has the Hyper-V server role installed. Corel has two network adapters from different third- party hardware vendors.
You need to configure network traffic failover to prevent connectivity loss if a network adapter fails.
What should you use?
A. New-NetSwitchTeam
B. Install-Feature
C. Add-NetSwitchTeamMember D. Netsh.exe

A

A

27
Q

QUESTION 136
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. The domain contains a virtual machine named VM1.
A developer wants to attach a debugger to VM1.
You need to ensure that the developer can connect to VM1 by using a named pipe.
Which virtual machine setting should you configure?
A. BIOS
B. Network Adapter
C. COM 1
D. Processor

A

C

28
Q

QUESTION 141
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 has the virtual switches listed in the following table.
You create a virtual machine named VM1. VM1 has two network adapters. One network adapter connects to vSwitch1. The other network adapter connects to vSwitch2. You configure NIC teaming on VM1.
You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the network.
What should you do on Server1?
A. Run the Set-VmNetworkAdapterRoutingDomainMappingcmdlet
B. Run the Set-VmNetworkAdapterlsolationcmdlet.
C. Run the Set-VmNetworkAdapterAdapterFailoverConfigurationcmdlet.
D. Modify the properties of the network adapters on VM1.

A

A

29
Q

QUESTION 154
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
You create an external virtual switch named Switch1. Switch1 has the following configurations: Connection type: External network
Single-root I/O virtualization (SR-IOV): Enabled
Ten virtual machines connect to Switch1.
You need to ensure that all of the virtual machines that connect to Switch1 are isolated from the external network and can connect to each other only. The solution must minimize network downtime for the virtual machines.
What should you do?
A. Remove Switch1 and recreate Switch1 as an internal network.
B. Change the Connection type of Switch1 to Private network.
C. Change the Connection type of Switch1 to Internal network.
D. Remove Switch1 and recreate Switch1 as a private network.

A

B

30
Q

QUESTION 155
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 50 virtual machines that run Windows Server 2012 R2.
Your company uses smart cards for authentication.
You need to ensure that you can use smart card authentication when you connect to the virtual machine by using Virtual Machine Connection.
What should you configure?
A. TheRemoteFX settings
B. The Enhanced Session Mode Policy
C. The NUMA Spanning settings
D. The Integration Services settings

A

B

31
Q

QUESTION 157
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. On Server1, you create a virtual machine named VM1.
You need to ensure that VM1 can start by using PXE.
What should you do?
A. Add a second network adapter, and then run the Set-VMNetworkAdaptercmdlet.
B. Add a second network adapter, and then configure network adapter teaming.
C. Remove the network adapter, and then run the Set-VMNetworkAdaptercmdlet.
D. Remove the network adapter, and then add a legacy network adapter.

A

D

32
Q

QUESTION 162
Your network contains two Hyper-V hosts named Host1 and Host2. Host1 contains a virtual machine named VM1. Host2 contains a virtual machine named VM2. VM1 and VM2 run Windows Server 2012 R2.
You install the Network Load Balancing feature on VM1 and VM2.
You need to ensure that the virtual machines are configured to support Network Load Balancing (NLB). Which virtual machine settings should you configure on VM1 and VM2?
A. DHCP guard
B. MAC address
C. Router guard
D. Port mirroring

A

B

33
Q 
QUESTION 1 
You have a server named Server1 that runs Windows Server 2012 R2.Server1 has the Hyper-V server role installed. An iSCSI SAN is available on the network. Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. You create a LUN on the SAN to host the virtual hard drive files for the virtual machines. You need to create a 3-TB virtual hard disk for VM1 on the LUN. The solution must prevent VM1 from being paused if the LUN runs out of disk space. Which type of virtual hard disk should you create on the LUN? 
A. Dynamically expanding VHDX 
B. Fixed-size VHDX 
C. Fixed-size VHD 
D. Dynamically expanding VHD
A

B

34
Q

QUESTION 170
You have a server named Server2 that runs Windows Server 2012 R2. Server2 has the Hyper-V server role installed.
The disks on Server2 are configured as shown in the exhibit. (Click the Exhibit button.)
You create a virtual machine on Server2 named VM1.
You need to ensure that you can configure a pass-through disk for VM1.
What should you do?
A. Convert Disk 1 to a basic disk.
B. Create a partition on Disk 1.
C. Take Disk 1 offline.
D. Convert Disk 1 to a MBR disk.

A

C

35
Q

QUESTION 171
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention. The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Stop Action
C. Automatic Start Action
D. Integration Services

A

B

36
Q

QUESTION 172
Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
HVServer1 hosts 10 generation 1 virtual machines. All of the virtual machines connect to a virtual switch named Switch1. Switch1 is configured as a private network. All of the virtual machines have the DHCP guard and the router guard settings enabled.
You install the DHCP server role on a virtual machine named Server1. You authorize Server1 as a DHCP server in contoso.com. You create an IP scope.
You discover that the virtual machines connected to Switch1 do not receive IP settings from Server1. You need to ensure that the virtual machines can use Server1 as a DHCP server.
What should you do?
A. Enable MAC address spoofing on Server1.
B. Enable single-root I/O visualization (SR-IOV) on Server1.
C. Disable the DHCP guard on Server1.
D. Disable the DHCP guard on all of the virtual machines that are DHCP clients.

A

C

37
Q

QUESTION 176
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
You need to configure storage for a virtual machine to meet the following requirements: Support up to 3 TB of data on a single hard disk.
Allocate disk space as needed.
Use a portable storage format.
What should you configure?
A. A fixed-size VHDX
B. A pass-through disk
C. A fixed-size VHD
D. A dynamically expanding VHDX
E. A dynamically expanding VHD

A

D

38
Q

QUESTION 173
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
You have a virtual machine named VM1. VM1 has a checkpoint. You need to modify the Checkpoint File Location of VM1.
What should you do first?
A. Copy the checkpoint file.
B. Delete the checkpoint.
C. Shut down VM1.
D. Pause VM1.

A

B

40
Q

QUESTION 186
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
On Server1, you create a virtual machine named VM1.
When you try to add a RemoteFX 3D Video Adapter to VM1, you discover that the option is unavailable as shown in the following exhibit. (Click the Exhibit button.)
You need to add the RemoteFX 3D Video Adapter to VM1. What should you do first?
A. On Server1, run the Add-VMRemoteFx3dVideoAdapter cmdlet
B. On Server1, install the Media Foundation feature.
C. On Server1, run the Enable-VMRemoteFxPhysicalVideoAdaptercmdlet.
D. On Server1, install the Remote Desktop Visualization Host (RD Visualization Host) role service.

A

D

40
Q

QUESTION 193
You have a virtual machine named VM1.
You install Windows Server 2012 R2 on VM1.
You plan to use VM1 as an image that will be distributed to sales users to demonstrate the features of a custom application. The custom application only requires the Web Server (IIS) server role to be installed.
You need to ensure that the VHD file for VM1 only contains the required Windows Server 2012 R2 source files.
Which tool should you use?
A. servermanagercmd.exe B. dism.exe
C. ocsetup.exe
D. imagex.exe

A

B

70-410 (9 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions