Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

Airbus A320 Family Systems > 6.000 ELECTRICAL > Flashcards

6.000 ELECTRICAL Flashcards

1
Q
  1. What starts the battery charging cycle on the ground?
A

A

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q
  1. Will the batteries completely drain if you leave the BAT switches in AUTO after AC power
    is removed? (Source)
  2. How is the BATTERY BUS normally powered? (Source)
  3. What does the amber FAULT light in the GALY & CAB pb indicate? (Source)
  4. How does the GALY & CAB pb work in AUTO? (Source)
  5. What does a FAULT on the ENG GEN pushbutton indicate? (Source)
  6. What does the APU GEN FAULT light indicate? (Source)
  7. What is the function of the BUS TIE in the AUTO position? (Source)
  8. What does an IDG FAULT light indicate? (Source)
  9. What precautions must be taken when disconnecting an IDG? (Source)
  10. How can an IDG be reset? (Source)
  11. What is the function of the AC ESS FEED pushbutton in the normal position? (Source)
  12. How is AC ESS FEED transferred from AC BUS 1 to AC BUS 2? (Source)
  13. What does the AC ESS FEED pushbutton white ALTN light indicate? (Source)
  14. What is the purpose of the static inverter? (Source)
  15. What are the 3 times the batteries are connected to the BATTERY BUS? (Source)
  16. What is the priority sequence for electrical power (GEARB)? (Source)
  17. What is the significance of the green and red collared circuit breakers on the Flight Deck?
    (Source)
  18. What buses are powered by the emergency generator? (Source)
  19. What is the function of the MAN ON pb on the EMER ELEC PWR Panel? (Source)
  20. How long does it take the RAT to extend and provide power? (Source)
  21. What does the red RAT & EMER GEN fault light on the EMER ELEC PWR Panel indicate?
    (Source)
  22. What powers the emergency generator? (Source)
  23. What is the difference in functionality of the MAN ON pb (EMER ELEC PWR Panel) and
    the RAT MAN ON pb (HYD Panel)? (Source)
  24. What happens when you push the GEN 1 LINE pushbutton? (Source)
  25. When is the GEN1 Line pushbutton used? (Source)
  26. What does the amber SMOKE light in the GEN 1 LINE pushbutton indicate? (Source)
  27. How would you know if the Blower and Extract fault lights were due to smoke?
A

B

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q
  1. Will the batteries completely drain if you leave the BAT switches in AUTO after AC power
    is removed? (Source)
  2. How is the BATTERY BUS normally powered? (Source)
  3. What does the amber FAULT light in the GALY & CAB pb indicate? (Source)
  4. How does the GALY & CAB pb work in AUTO? (Source)
  5. What does a FAULT on the ENG GEN pushbutton indicate? (Source)
  6. What does the APU GEN FAULT light indicate? (Source)
  7. What is the function of the BUS TIE in the AUTO position? (Source)
  8. What does an IDG FAULT light indicate? (Source)
  9. What precautions must be taken when disconnecting an IDG? (Source)
  10. How can an IDG be reset? (Source)
  11. What is the function of the AC ESS FEED pushbutton in the normal position? (Source)
  12. How is AC ESS FEED transferred from AC BUS 1 to AC BUS 2? (Source)
  13. What does the AC ESS FEED pushbutton white ALTN light indicate? (Source)
  14. What is the purpose of the static inverter? (Source)
  15. What are the 3 times the batteries are connected to the BATTERY BUS? (Source)
  16. What is the priority sequence for electrical power (GEARB)? (Source)
  17. What is the significance of the green and red collared circuit breakers on the Flight Deck?
    (Source)
  18. What buses are powered by the emergency generator? (Source)
  19. What is the function of the MAN ON pb on the EMER ELEC PWR Panel? (Source)
  20. How long does it take the RAT to extend and provide power? (Source)
  21. What does the red RAT & EMER GEN fault light on the EMER ELEC PWR Panel indicate?
    (Source)
  22. What powers the emergency generator? (Source)
  23. What is the difference in functionality of the MAN ON pb (EMER ELEC PWR Panel) and
    the RAT MAN ON pb (HYD Panel)? (Source)
  24. What happens when you push the GEN 1 LINE pushbutton? (Source)
  25. When is the GEN1 Line pushbutton used? (Source)
  26. What does the amber SMOKE light in the GEN 1 LINE pushbutton indicate? (Source)
  27. How would you know if the Blower and Extract fault lights were due to smoke?
A

C

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q
  1. Will the batteries completely drain if you leave the BAT switches in AUTO after AC power
    is removed? (Source)
  2. How is the BATTERY BUS normally powered? (Source)
  3. What does the amber FAULT light in the GALY & CAB pb indicate? (Source)
  4. How does the GALY & CAB pb work in AUTO? (Source)
  5. What does a FAULT on the ENG GEN pushbutton indicate? (Source)
  6. What does the APU GEN FAULT light indicate? (Source)
  7. What is the function of the BUS TIE in the AUTO position? (Source)
  8. What does an IDG FAULT light indicate? (Source)
  9. What precautions must be taken when disconnecting an IDG? (Source)
  10. How can an IDG be reset? (Source)
  11. What is the function of the AC ESS FEED pushbutton in the normal position? (Source)
  12. How is AC ESS FEED transferred from AC BUS 1 to AC BUS 2? (Source)
  13. What does the AC ESS FEED pushbutton white ALTN light indicate? (Source)
  14. What is the purpose of the static inverter? (Source)
  15. What are the 3 times the batteries are connected to the BATTERY BUS? (Source)
  16. What is the priority sequence for electrical power (GEARB)? (Source)
  17. What is the significance of the green and red collared circuit breakers on the Flight Deck?
    (Source)
  18. What buses are powered by the emergency generator? (Source)
  19. What is the function of the MAN ON pb on the EMER ELEC PWR Panel? (Source)
  20. How long does it take the RAT to extend and provide power? (Source)
  21. What does the red RAT & EMER GEN fault light on the EMER ELEC PWR Panel indicate?
    (Source)
  22. What powers the emergency generator? (Source)
  23. What is the difference in functionality of the MAN ON pb (EMER ELEC PWR Panel) and
    the RAT MAN ON pb (HYD Panel)? (Source)
  24. What happens when you push the GEN 1 LINE pushbutton? (Source)
  25. When is the GEN1 Line pushbutton used? (Source)
  26. What does the amber SMOKE light in the GEN 1 LINE pushbutton indicate? (Source)
  27. How would you know if the Blower and Extract fault lights were due to smoke?
A

D

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q
  1. Will the batteries completely drain if you leave the BAT switches in AUTO after AC power
    is removed? (Source)
  2. How is the BATTERY BUS normally powered? (Source)
  3. What does the amber FAULT light in the GALY & CAB pb indicate? (Source)
  4. How does the GALY & CAB pb work in AUTO? (Source)
  5. What does a FAULT on the ENG GEN pushbutton indicate? (Source)
  6. What does the APU GEN FAULT light indicate? (Source)
  7. What is the function of the BUS TIE in the AUTO position? (Source)
  8. What does an IDG FAULT light indicate? (Source)
  9. What precautions must be taken when disconnecting an IDG? (Source)
  10. How can an IDG be reset? (Source)
  11. What is the function of the AC ESS FEED pushbutton in the normal position? (Source)
  12. How is AC ESS FEED transferred from AC BUS 1 to AC BUS 2? (Source)
  13. What does the AC ESS FEED pushbutton white ALTN light indicate? (Source)
  14. What is the purpose of the static inverter? (Source)
  15. What are the 3 times the batteries are connected to the BATTERY BUS? (Source)
  16. What is the priority sequence for electrical power (GEARB)? (Source)
  17. What is the significance of the green and red collared circuit breakers on the Flight Deck?
    (Source)
  18. What buses are powered by the emergency generator? (Source)
  19. What is the function of the MAN ON pb on the EMER ELEC PWR Panel? (Source)
  20. How long does it take the RAT to extend and provide power? (Source)
  21. What does the red RAT & EMER GEN fault light on the EMER ELEC PWR Panel indicate?
    (Source)
  22. What powers the emergency generator? (Source)
  23. What is the difference in functionality of the MAN ON pb (EMER ELEC PWR Panel) and
    the RAT MAN ON pb (HYD Panel)? (Source)
  24. What happens when you push the GEN 1 LINE pushbutton? (Source)
  25. When is the GEN1 Line pushbutton used? (Source)
  26. What does the amber SMOKE light in the GEN 1 LINE pushbutton indicate? (Source)
  27. How would you know if the Blower and Extract fault lights were due to smoke?
A

E

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q
  1. Will the batteries completely drain if you leave the BAT switches in AUTO after AC power
    is removed? (Source)
  2. How is the BATTERY BUS normally powered? (Source)
  3. What does the amber FAULT light in the GALY & CAB pb indicate? (Source)
  4. How does the GALY & CAB pb work in AUTO? (Source)
  5. What does a FAULT on the ENG GEN pushbutton indicate? (Source)
  6. What does the APU GEN FAULT light indicate? (Source)
  7. What is the function of the BUS TIE in the AUTO position? (Source)
  8. What does an IDG FAULT light indicate? (Source)
  9. What precautions must be taken when disconnecting an IDG? (Source)
  10. How can an IDG be reset? (Source)
  11. What is the function of the AC ESS FEED pushbutton in the normal position? (Source)
  12. How is AC ESS FEED transferred from AC BUS 1 to AC BUS 2? (Source)
  13. What does the AC ESS FEED pushbutton white ALTN light indicate? (Source)
  14. What is the purpose of the static inverter? (Source)
  15. What are the 3 times the batteries are connected to the BATTERY BUS? (Source)
  16. What is the priority sequence for electrical power (GEARB)? (Source)
  17. What is the significance of the green and red collared circuit breakers on the Flight Deck?
    (Source)
  18. What buses are powered by the emergency generator? (Source)
  19. What is the function of the MAN ON pb on the EMER ELEC PWR Panel? (Source)
  20. How long does it take the RAT to extend and provide power? (Source)
  21. What does the red RAT & EMER GEN fault light on the EMER ELEC PWR Panel indicate?
    (Source)
  22. What powers the emergency generator? (Source)
  23. What is the difference in functionality of the MAN ON pb (EMER ELEC PWR Panel) and
    the RAT MAN ON pb (HYD Panel)? (Source)
  24. What happens when you push the GEN 1 LINE pushbutton? (Source)
  25. When is the GEN1 Line pushbutton used? (Source)
  26. What does the amber SMOKE light in the GEN 1 LINE pushbutton indicate? (Source)
  27. How would you know if the Blower and Extract fault lights were due to smoke?
A

F

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q
  1. Will the batteries completely drain if you leave the BAT switches in AUTO after AC power
    is removed? (Source)
  2. How is the BATTERY BUS normally powered? (Source)
  3. What does the amber FAULT light in the GALY & CAB pb indicate? (Source)
  4. How does the GALY & CAB pb work in AUTO? (Source)
  5. What does a FAULT on the ENG GEN pushbutton indicate? (Source)
  6. What does the APU GEN FAULT light indicate? (Source)
  7. What is the function of the BUS TIE in the AUTO position? (Source)
  8. What does an IDG FAULT light indicate? (Source)
  9. What precautions must be taken when disconnecting an IDG? (Source)
  10. How can an IDG be reset? (Source)
  11. What is the function of the AC ESS FEED pushbutton in the normal position? (Source)
  12. How is AC ESS FEED transferred from AC BUS 1 to AC BUS 2? (Source)
  13. What does the AC ESS FEED pushbutton white ALTN light indicate? (Source)
  14. What is the purpose of the static inverter? (Source)
  15. What are the 3 times the batteries are connected to the BATTERY BUS? (Source)
  16. What is the priority sequence for electrical power (GEARB)? (Source)
  17. What is the significance of the green and red collared circuit breakers on the Flight Deck?
    (Source)
  18. What buses are powered by the emergency generator? (Source)
  19. What is the function of the MAN ON pb on the EMER ELEC PWR Panel? (Source)
  20. How long does it take the RAT to extend and provide power? (Source)
  21. What does the red RAT & EMER GEN fault light on the EMER ELEC PWR Panel indicate?
    (Source)
  22. What powers the emergency generator? (Source)
  23. What is the difference in functionality of the MAN ON pb (EMER ELEC PWR Panel) and
    the RAT MAN ON pb (HYD Panel)? (Source)
  24. What happens when you push the GEN 1 LINE pushbutton? (Source)
  25. When is the GEN1 Line pushbutton used? (Source)
  26. What does the amber SMOKE light in the GEN 1 LINE pushbutton indicate? (Source)
  27. How would you know if the Blower and Extract fault lights were due to smoke?
A

G

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q
  1. Will the batteries completely drain if you leave the BAT switches in AUTO after AC power
    is removed? (Source)
  2. How is the BATTERY BUS normally powered? (Source)
  3. What does the amber FAULT light in the GALY & CAB pb indicate? (Source)
  4. How does the GALY & CAB pb work in AUTO? (Source)
  5. What does a FAULT on the ENG GEN pushbutton indicate? (Source)
  6. What does the APU GEN FAULT light indicate? (Source)
  7. What is the function of the BUS TIE in the AUTO position? (Source)
  8. What does an IDG FAULT light indicate? (Source)
  9. What precautions must be taken when disconnecting an IDG? (Source)
  10. How can an IDG be reset? (Source)
  11. What is the function of the AC ESS FEED pushbutton in the normal position? (Source)
  12. How is AC ESS FEED transferred from AC BUS 1 to AC BUS 2? (Source)
  13. What does the AC ESS FEED pushbutton white ALTN light indicate? (Source)
  14. What is the purpose of the static inverter? (Source)
  15. What are the 3 times the batteries are connected to the BATTERY BUS? (Source)
  16. What is the priority sequence for electrical power (GEARB)? (Source)
  17. What is the significance of the green and red collared circuit breakers on the Flight Deck?
    (Source)
  18. What buses are powered by the emergency generator? (Source)
  19. What is the function of the MAN ON pb on the EMER ELEC PWR Panel? (Source)
  20. How long does it take the RAT to extend and provide power? (Source)
  21. What does the red RAT & EMER GEN fault light on the EMER ELEC PWR Panel indicate?
    (Source)
  22. What powers the emergency generator? (Source)
  23. What is the difference in functionality of the MAN ON pb (EMER ELEC PWR Panel) and
    the RAT MAN ON pb (HYD Panel)? (Source)
  24. What happens when you push the GEN 1 LINE pushbutton? (Source)
  25. When is the GEN1 Line pushbutton used? (Source)
  26. What does the amber SMOKE light in the GEN 1 LINE pushbutton indicate? (Source)
  27. How would you know if the Blower and Extract fault lights were due to smoke?
A

H

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q
  1. Will the batteries completely drain if you leave the BAT switches in AUTO after AC power
    is removed? (Source)
  2. How is the BATTERY BUS normally powered? (Source)
  3. What does the amber FAULT light in the GALY & CAB pb indicate? (Source)
  4. How does the GALY & CAB pb work in AUTO? (Source)
  5. What does a FAULT on the ENG GEN pushbutton indicate? (Source)
  6. What does the APU GEN FAULT light indicate? (Source)
  7. What is the function of the BUS TIE in the AUTO position? (Source)
  8. What does an IDG FAULT light indicate? (Source)
  9. What precautions must be taken when disconnecting an IDG? (Source)
  10. How can an IDG be reset? (Source)
  11. What is the function of the AC ESS FEED pushbutton in the normal position? (Source)
  12. How is AC ESS FEED transferred from AC BUS 1 to AC BUS 2? (Source)
  13. What does the AC ESS FEED pushbutton white ALTN light indicate? (Source)
  14. What is the purpose of the static inverter? (Source)
  15. What are the 3 times the batteries are connected to the BATTERY BUS? (Source)
  16. What is the priority sequence for electrical power (GEARB)? (Source)
  17. What is the significance of the green and red collared circuit breakers on the Flight Deck?
    (Source)
  18. What buses are powered by the emergency generator? (Source)
  19. What is the function of the MAN ON pb on the EMER ELEC PWR Panel? (Source)
  20. How long does it take the RAT to extend and provide power? (Source)
  21. What does the red RAT & EMER GEN fault light on the EMER ELEC PWR Panel indicate?
    (Source)
  22. What powers the emergency generator? (Source)
  23. What is the difference in functionality of the MAN ON pb (EMER ELEC PWR Panel) and
    the RAT MAN ON pb (HYD Panel)? (Source)
  24. What happens when you push the GEN 1 LINE pushbutton? (Source)
  25. When is the GEN1 Line pushbutton used? (Source)
  26. What does the amber SMOKE light in the GEN 1 LINE pushbutton indicate? (Source)
  27. How would you know if the Blower and Extract fault lights were due to smoke?
A

I

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q
  1. Will the batteries completely drain if you leave the BAT switches in AUTO after AC power
    is removed? (Source)
  2. How is the BATTERY BUS normally powered? (Source)
  3. What does the amber FAULT light in the GALY & CAB pb indicate? (Source)
  4. How does the GALY & CAB pb work in AUTO? (Source)
  5. What does a FAULT on the ENG GEN pushbutton indicate? (Source)
  6. What does the APU GEN FAULT light indicate? (Source)
  7. What is the function of the BUS TIE in the AUTO position? (Source)
  8. What does an IDG FAULT light indicate? (Source)
  9. What precautions must be taken when disconnecting an IDG? (Source)
  10. How can an IDG be reset? (Source)
  11. What is the function of the AC ESS FEED pushbutton in the normal position? (Source)
  12. How is AC ESS FEED transferred from AC BUS 1 to AC BUS 2? (Source)
  13. What does the AC ESS FEED pushbutton white ALTN light indicate? (Source)
  14. What is the purpose of the static inverter? (Source)
  15. What are the 3 times the batteries are connected to the BATTERY BUS? (Source)
  16. What is the priority sequence for electrical power (GEARB)? (Source)
  17. What is the significance of the green and red collared circuit breakers on the Flight Deck?
    (Source)
  18. What buses are powered by the emergency generator? (Source)
  19. What is the function of the MAN ON pb on the EMER ELEC PWR Panel? (Source)
  20. How long does it take the RAT to extend and provide power? (Source)
  21. What does the red RAT & EMER GEN fault light on the EMER ELEC PWR Panel indicate?
    (Source)
  22. What powers the emergency generator? (Source)
  23. What is the difference in functionality of the MAN ON pb (EMER ELEC PWR Panel) and
    the RAT MAN ON pb (HYD Panel)? (Source)
  24. What happens when you push the GEN 1 LINE pushbutton? (Source)
  25. When is the GEN1 Line pushbutton used? (Source)
  26. What does the amber SMOKE light in the GEN 1 LINE pushbutton indicate? (Source)
  27. How would you know if the Blower and Extract fault lights were due to smoke?
A

J

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q
  1. Will the batteries completely drain if you leave the BAT switches in AUTO after AC power
    is removed? (Source)
  2. How is the BATTERY BUS normally powered? (Source)
  3. What does the amber FAULT light in the GALY & CAB pb indicate? (Source)
  4. How does the GALY & CAB pb work in AUTO? (Source)
  5. What does a FAULT on the ENG GEN pushbutton indicate? (Source)
  6. What does the APU GEN FAULT light indicate? (Source)
  7. What is the function of the BUS TIE in the AUTO position? (Source)
  8. What does an IDG FAULT light indicate? (Source)
  9. What precautions must be taken when disconnecting an IDG? (Source)
  10. How can an IDG be reset? (Source)
  11. What is the function of the AC ESS FEED pushbutton in the normal position? (Source)
  12. How is AC ESS FEED transferred from AC BUS 1 to AC BUS 2? (Source)
  13. What does the AC ESS FEED pushbutton white ALTN light indicate? (Source)
  14. What is the purpose of the static inverter? (Source)
  15. What are the 3 times the batteries are connected to the BATTERY BUS? (Source)
  16. What is the priority sequence for electrical power (GEARB)? (Source)
  17. What is the significance of the green and red collared circuit breakers on the Flight Deck?
    (Source)
  18. What buses are powered by the emergency generator? (Source)
  19. What is the function of the MAN ON pb on the EMER ELEC PWR Panel? (Source)
  20. How long does it take the RAT to extend and provide power? (Source)
  21. What does the red RAT & EMER GEN fault light on the EMER ELEC PWR Panel indicate?
    (Source)
  22. What powers the emergency generator? (Source)
  23. What is the difference in functionality of the MAN ON pb (EMER ELEC PWR Panel) and
    the RAT MAN ON pb (HYD Panel)? (Source)
  24. What happens when you push the GEN 1 LINE pushbutton? (Source)
  25. When is the GEN1 Line pushbutton used? (Source)
  26. What does the amber SMOKE light in the GEN 1 LINE pushbutton indicate? (Source)
  27. How would you know if the Blower and Extract fault lights were due to smoke?
A

K

How well did you know this?
1
Not at all
2
3
4
5
Perfectly

Airbus A320 Family Systems (6 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions