5 - Control Flashcards
What are the steps within the control phase ?
Step 13 - Institutionalise the solution (s)
Step 14 - Replicate and share best practices
Step 15 - Celebrate and recognize success
What are the 6 tools used within the Step 13 of the control phase : “ Institutionalize the solutions (s) “ ?
The tools are :
1 - VMBs
2 - Team Huddles
3 - SOPs
4 - Go Gemba
5 - Control Plan
6 - Control Charts
- IMR Chart
- XR Chart
- XS Chart
- np Chart
- p Chart
- c Chart
- u Chart
Mmotechniq: Imma a un XR & un XS nope pcu
What are the tools used within the Step 14 of the control phase : “ Replicate and share best practices “ ?
The tools are :
1 - Best Practice Transfer
What are the tools used within the Step 15 of the control phase : “ Celebrate and recognize success “ ?
The tools are :
1 - Post Implementation Review
2 - Celebrate
What is a VMB ? (Visual Management Board)
Draw a VMB ?
What is team Huddles ?
What are the SOP’s ? (Standard Operating Procedures)
What is GO-GEMBA ?
What are control charts & What are they used for ?
What are the differences between control limits & Specification Limits ?
What are the seven indicators of an OUT of CONTROL PROCESS ? And Draw the cases (Watch lessons book if needed)
1 - One point or more points fall outside of the control limits
2 - Seven Consecutive Points Steadily Increasing or Decreasing
3 - Eight consecutive points on one side of the average
4 - Fourteen consecutive points in an up and down pattern
5 - Two out of three consecutive points in zone A or Beyond
6 - Four out of Five Consecutive Points in a Row in Zone B or Beyond
7 - Fifteen Consecutive Points in Zone C
Example (1)
Draw me the decision tree to perform a control chart selection ?
How to perform a I-MR chart on minitab ?
How to perform a X-R chart on mini-tab ?