350-801 50 1 Flashcards
An engineer encounters third-party devices that do not support Cisco Discovery Protocol.
What must be configured on the network to allow device discovery?
A. TFTP
B. LACP
C. LLDP
D. SNMP
Answer : C
End users report bad video quality and voice choppiness on Cisco Collaboration endpoints.
The engineer changed the device pool the users were in but did not correct the problem.
Which action should be taken to troubleshoot this issue?
A. Set the service parameter Use Video Bandwidth Pool for Immersive Video Calls to “false”.
B. Check for duplex/speed mismatches between the network port settings of the system and network
switch.
C. Restart the Cisco Location Bandwidth Manager service on the Cisco UCM publisher.
D. Use direct IP address calls between two endpoints to troubleshoot call quality issues.
Answer : A
- Which endpoint feature is supported using Mobile and Remote Access through Cisco Expressway?
A. SSO
B. H.323 registration proxy to Cisco Unified Communications Manager
C. MGCP gateway registration
D. SRST
Answer : A
Which command in the MGCP gateway configuration defines the secondary Cisco Unified
Communications Manager server?
A. ccm-manager redundant-host
B. Mgcp call-agent
C. Mgcpapp
D. ccm-manager fallback-mgcp
Answer : A
Refer to the Exhibit :
An administrator must fix the SRV records to ensure that server1.sample.com is always contected first
from the three servers.
Which solution should apply to resolve this issue?
A. Priority = 10, Weight = 5
B. Priority = 100, Weight = 90
C. Priority = 10, Weight = 10
D. Priority = 5, Weight = 70
Answer : D
Which two steps should be taken to provision after the Self-Provisioning feature was configured for
end users? (Choose two.)
A. Dial the self-provisioning IVR extension and associate the phone to an end user.
B. Plug the phone into the network.
C. Ask the Cisco UCM administrator to associate the phone to an end user.
D. Enter settings menu on the phone and press *,*,# (star, star, pound).
E. Dial the hunt pilot extension and associate the phone to an end user.
Answer A,B
Which issue cause slips on a PRI?
A. incorrectly configured time zone.
B. incorrectly encapsulation
C. incorrect clock source
D. change in the line code
Answer: C
An engineer wants to manually deploy a Cisco Webex DX80 video endpoint to an end user.
Which type of provisioning can be configured on the endpoint?
A. CUC
B. CUBE
C. CMS
D. Edge
Answer : D
An administrator is trying to change the default LINECODE for a voice ISDN T1 PRI.
Which command makes the change?
A. linecode ami
B. linecode hdb3
C. linecode b8zs
D. linecode esf
Answer A
When a user dials a number with a phone that is registered to the Cisco Unified Communications
Manager, what is the default timeout before the number is sent?
A. 3 seconds
B. 15 seconds
C. 10 seconds
D. 5 seconds
Answer B
Cisco Unity Connection Administrator must set a voice mailbox so that is can be accessed form a
secondary device.
Which configuration on the voice mailbox makes this change?
A. Mobile User
B. Alternate Names
C. Attempt Forward routing rule
D. Alternate Extensions
Answer D
A company deploys centralized cisco ucm architecture for a hub location and two remote sites.
✑ The company has only one ITSP connection at the hub connection, and ITSP supports only G.711 calls
✑ Remote site A has a 1-Gbps fiber connection to the hub connection and calls to and from remote side A
use G.711 codec
✑ Remote site B has a 1 T1 connection to the hub location and calls to and from remote site B use G.729
codec
Based on the provided guidance, a Cisco voice engineer must design media resource management for
the customer.
What is the method that needs to be followed?
A. configure the hardware transcoder on the site B router.
B. configure the hardware transcoder on the site A router.
C. configure the hardware transcoder on the hub location router.
D. configure the software transcoder on Cisco UCM to support voice calls to and from both remote sites.
Answer C
Which two elements of a dial plan define the domains that are accessible and are assigned to an
endpoint? (Choose two.)
A. Call Admissions Control
B. Route patterns
C. Calling Search Spaces
D. Translation patterns
E. partitions
Answer : C E
After an engineer runs the utils ntp status command on the Cisco Unified Communications manager publisher, the stratum value is 16.
Which issue can the cisco Unified CM cluster experience?
A. The date/time group an all phones default to the time zone of the engineer.
B. The cluster loses access to port 124 at the firewall.
C. Unified CM sends an NTPv4 packet.
D. Database replication is not synchronized on the Unified CM nodes.
Answer D
Which Cisco Unified Communications Manager feature is to determine the maximum bit rate for a call
between two video endpoints?
A. Partitions
B. Locations
C. Regions
D. transformations
Answer C
Calls are being delivered to the end user in the globalized format.
Where does an engineer configure the calling number into a localized format?
A. gateway
B. route pattern
C. IP phone
D. service parameters
Answer C
Which open-standard protocol is the basis for the Extensible Messaging and Presence Protocol?
A. Json
B. SIP
C. XML
D. HTTP
Answer C
Refer to the exhibit.
What is a possible cause of the PRI issue?
A. The cable is unplugged.
B. The controller shut down.
C. The clock source is incorrect.
D. The framing is configured incorrectly.
Anwer D
Refer to the exhibit.
What is the registration state of the analog port in this debug output?
A. The MGCP Gateway is not communicating with the Cisco UCM.
B. The analog port failed to register to Cisco UCM with an error code 200.
C. The analog port is currently shut down.
D. The analog port is registered to Cisco UCM.
Answer : D
Refer to the exhibit. An engineer must configure a SIP route pattern using domain routing with
destination +13135551212. The domain ciscocm1.jupiter.com resolves to 192.168.1.3.
How must the IPV4 pattern be configured?
A. Option A
B. Option B
C. Option C
D. Option D
Answer B