206.05 Operating Power Saws

Question 0

What should be in position to provide eye protection?

Answer 0

Face shield

Question 1

———– shall be worn by those members operating, and by those members in close proximity to the operation of power saws.

Answer 1

Full protective clothing

Question 2

To prevent accidents caused by moving belts, gears, chains, blades, etc, it is imperative that the operator and guide have their protective clothing completely ——–.

Answer 2

Buttoned up

Question 3

Carry the rescue saw with the engine ——–, The blade ——-, and muffler ———.

Answer 3

Stopped, frontward, away from the body

Question 4

True or false:

the saw shall always be shut down when unattended.

Answer 4

True

Question 5

Having a plan of action before putting the saw into operation should include what three things?

Answer 5

1: location and sequence of cuts
2: Wind direction
3: two means of egress if possible

Question 6

Power saw operations are safest when cutting on horizontal surfaces ——— or on vertical surfaces ———

Answer 6

Near ground level, near waist level

Question 7

Operating a power saw———- is extremely hazardous and should not be attempted as a normal course of action and should only be conducted under the direct order and supervision of an officer.

Answer 7

Above chest height

Question 8

What can be used to carry a saw climbing a ladder so that both hands are free to grab the ladder rungs?

Answer 8

Safety harness or carrying strap

Question 9

When using the rescue saw to open metal buildings what cuts help to eliminate hazards of sharp edges?

Answer 9

X cut or triangular cut

Question 10

True or false:

The saw should never be refueled when the engine is running.

Answer 10

True

Question 11

How often should the rescue saw cutting wheel be examined for nicks or defects?

Answer 11

At the beginning of each shift or after each use

Question 12

Care must be taken to ensure that the abrasive sawblades do not become contaminated with :

Answer 12

Petroleum-based products