2. Quiz Prep

Question 1

What is fracturing? What is frack fluid?

Answer 1

1. drill down roughly 2km and then make a 90-degree turn is made for roughly the same length.
2. frac fluid is injected at high pressure into the well to create small fractures within tight shale formations and hold the cracks open with the small sand particles in the fluid. Oil or NG flows into the well and is pumped to the surface.
3. ff= 90% water; 9.5% sand; 0.5% chemicals to help dissolve rock and thicken fluid The sand is called proppant because it keeps the cracks propped open. Ceramic beads and other items are sometimes used instead of sand.

Question 2

What are considered to be some of the benefits of fracturing?

Answer 2

1. it can recover both crude oil and natural gas from shale deposits in unprecedented amounts
2. lower energy prices,
3. greater energy security,
4. reduced air pollution, and
5. fewer carbon emissions

Question 3

According to d-083 (2013) if above or within 100m of BGWP what is required? Any exceptions?

Answer 3

Question 4

If a modelled vertical fracture distance X 2 is within or extends above BGWP, what applies?

Answer 4

Question 5

Answer 5

100 M

Question 6

Answer 6

Question 7

Answer 7

no

Question 8

Answer 8

Question 9

Answer 9

Question 10

Answer 10

Question 11

true or False

Answer 11

true

Question 12

The three fracture components whe it comes to fracture fluid:

1. Carrier fluid:
2. Proppant:
3. Additive:

Answer 12

1. Main fracture fluid
2. Used to keep fracture open
3. used to facilitate fracturing

Question 13

What are the three components when it comes to fracture fluid?

Answer 13

1. Carrier fluid: main fracture fluid component
2. proppant: used to keep fractures open
3. Additive: used to facilitate fracturing

Question 14

What are the three main components?

1. main fracture fluid component
2. used to keep fractures open
3. used to facilitate fracturing

Answer 14

1. Carrier fluid
2. proppant
3. Additive

Question 15

Licensees must report the dates casing or liner were set in chronological order (whether cemented or uncemented)

1. What is the casing code for Surface casing?
2. what is the casing code for production casing?

Answer 15

Yes

s.3 sub 7

1. Table 2 -. code 2
2. table 2 - code 4

Question 16

What section of D-059 lays out the requirements for

Fracture fluid composition data?

Answer 16

section 4

Question 17

Answer 17

Question 18

Answer 18

Question 19

Answer 19

Question 20

After declaring the Fracture components the licensee is also expected to detail the fracture Fluid Water _____ data.

Answer 20

source