14. Tools, Work Equipment

Question 1

14. Tools, Work Equipment

Answer 1

14.1. All tools and work equipment shall be suitable for the rope access work intended and compatible with the rope access systems.

Question 2

14. Tools, Work Equipment

Answer 2

14.2. Tools and work equipment attached to the rope access technician or rope systems shall not impair the function of the main or backup systems.

Question 3

14. Tools, Work Equipment

Answer 3

14.3. Appropriate steps shall be taken to prevent tools and work equipment from being dropped or falling.

Question 4

14. Tools, Work Equipment

Answer 4

14.3.1 Tool tethers shall be used when possible.

Question 5

14. Tools, Work Equipment

Answer 5

14.4. Tools and equipment more than 10 kg (22.2 lb.) in mass should be suspended with a separate rope system secured to an independent anchorage system.

Question 6

14. Tools, Work Equipment

Answer 6

14.4.1. Anchorage and rope systems used for equipment should be clearly identified to avoid confusion with those used to support persons.

Question 7

14. Tools, Work Equipment

Answer 7

14.4.2. When significant risk of harm to personnel or property from component failure of a rope system suspending or transporting tools, work equipment, and /or materials exists, a backup system should be considered.

Question 8

14. Tools, Work Equipment

Answer 8

14.5. Moving parts of tools should be kept clear of the rope access technician, the rope access systems, and power cables.

Question 9

14. Tools, Work Equipment

Answer 9

14.6. Power tools that could cause injury to the rope access technician or rope access systems shall be fitted with an automatic shut off switch.

Question 10

14. Tools, Work Equipment

Answer 10

14.7. Appropriate grounding and ground fault circuit interruption shall be provided for as necessary.

Question 11

14. Tools, Work Equipment

Answer 11

14.8. Power cables shall be adequately supported and secured.