108

Question 1

MATS ACC > Service Fundamentals > Position Fundamentals > Transferring Position Responsibility > Relieving a Controller from an Operating Position

The controller being relieved is responsible for the position during the pre-relief monitoring process.

When relieving a controller from an operating position:

Answer 1

1. If the position is equipped with an electronic log-on system that records time preparing to accept responsibility for the control position, and time on duty in the position, log on according to unit directives. A trainee is expected to log on with the OJI and to log off when leaving the position.
2. Observe operational situations and equipment.
3. Listen to communications.
4. Observe current and pending traffic.
5. Verify the position transfer checklist.
6. Correlate information.
7. Inform the controller being relieved that the position has been reviewed and request a verbal briefing
8. Exchange all pertinent data and ask questions, as appropriate, to ensure understanding.
9. After the verbal briefing, state, or otherwise indicate clearly to the controller being relieved, that position responsibility has been transferred.

Question 2

MATS ACC > Service Fundamentals > Position Fundamentals

Before assuming responsibility for any operating position:

Answer 2

• Be able to produce your valid Aviation Document Booklet (ADB) or equivalent.
• Ensure that licensing and proficiency requirements are met.
• Sign in as required in unit procedures.
• Read and acknowledge all mandatory information, as determined by the unit manager.
• Review appropriate operational information, for example,NOTAMs, aerodrome conditions, equipment status, and weather information.

Question 3

MATS ACC > Service Fundamentals > Position Fundamentals > Transferring Operating Position Responsibility > Responsibilities When Being Relieved from an Operating Position

The relieving controller is responsible for the position during the post-relief procedures.

When being relieved from your operating position:

Answer 3

• Provide a verbal briefing to the relieving controller using the position transfer checklist.
• If the communication system permits, record the verbal briefing.
• Remain with the relieving controller for monitoring purposes. During this time, reinforce the position relief briefing and help the relieving controller become familiar with the position.
• When combining a position, perform the post-relief overlap procedures at the position where the operation was combined.