YCM GT300LB Flashcards
What is the X-axis travel of the YCM GT300LB?
9.65”
What is the Z-axis travel of the YCM GT300LB?
49.21”
What type of bed construction does the YCM GT300LB have?
High-quality cast iron with a one-piece box-type design.
What type of guideways are used in the X and Z axes of the YCM GT300LB?
Boxed guideways.
What control unit is included with the YCM GT300LB?
FANUC TXP200FB+.
What industries is the YCM GT300LB best suited for?
Medical, aerospace, automotive, and job shops.
What is the swing over bed for the YCM GT300LB?
23.62”
What is the swing over carriage for the YCM GT300LB?
17.72”
What is the maximum turning diameter of the YCM GT300LB?
17.32”
What is the maximum turning length for the YCM GT300LB?
49.21”
What is the distance between centers on the YCM GT300LB?
35.08”
What is the rapid traverse rate of the X-axis on the YCM GT300LB?
787 IPM
What is the rapid traverse rate of the Z-axis on the YCM GT300LB?
945 IPM
What is the cutting feed rate for both axes on the YCM GT300LB?
394 IPM
What is the spindle nose interface on the YCM GT300LB?
A2-8
What is the chuck size on the YCM GT300LB?
12”
What is the spindle speed range of the YCM GT300LB?
10 to 3,000 RPM
What is the continuous power rating for the main spindle of the YCM GT300LB?
15 HP
What is the maximum power rating for the main spindle of the YCM GT300LB?
25 HP
What is the maximum torque rating for the YCM GT300LB spindle?
651.5 ft. lbs.
How many tools can the turret on the YCM GT300LB hold?
8 tools
What type of turret does the YCM GT300LB have?
Servo-driven turret with hydraulic clamping.
What is the tool index time for the turret on the YCM GT300LB?
0.91 seconds
What is the 180° tool index time on the YCM GT300LB?
1.42 seconds
What type of tools does the YCM GT300LB turret use?
Block type.
What is the quill taper of the tailstock on the YCM GT300LB?
MT-5
What is the tailstock quill diameter on the YCM GT300LB?
3.94”
What is the quill stroke of the tailstock on the YCM GT300LB?
3.94”
What is the tailstock stroke on the YCM GT300LB?
45.47”
What is the maximum thrust force of the tailstock on the YCM GT300LB?
1,300 lbs.
What type of chip conveyor does the YCM GT300LB use?
Lift-up style chip conveyor.
What is the coolant tank capacity of the YCM GT300LB?
34 US gallons.
How does the chip conveyor on the YCM GT300LB improve machine uptime?
By minimizing chip migration and reducing coolant tank cleaning time.
What is the minimum air pressure required for the YCM GT300LB?
87 PSI (6 bar)
What is the voltage requirement for the YCM GT300LB?
220 volts.
What is the KVA rating for the YCM GT300LB?
35 KVA
What is the recommended breaker size for the YCM GT300LB?
90A
What is the required floor space for the YCM GT300LB with the chip conveyor?
190” x 80.59” x 79.33”
What is the weight of the YCM GT300LB?
17,306 lbs.
What does the Automatic Tool Length Measurement (ATLM) system on the YCM GT300LB provide?
Fast tool setup.
Is ATLM available with the 15” chuck option on the YCM GT300LB?
No.
How does the hydraulic chuck system on the YCM GT300LB enhance machining?
By providing machining rigidity and accuracy.
What is the benefit of the pressure sensors in the hydraulic system of the YCM GT300LB?
They monitor clamping force to ensure proper part clamping.
What is the advantage of the spindle motor being outside the machine base in the YCM GT300LB?
It isolates heat generated from long spindle operations.
What type of thermal control is used in the YCM GT300LB spindle headstock?
Symmetrical design with reinforced ventilation.
How does the YCM GT300LB minimize thermal growth during long running hours?
With effective exhaust fans in the spindle headstock.
Where are the spindles of the YCM GT300LB assembled?
In a temperature-controlled room.
What is the constant torque range for the YCM GT300LB spindle?
10 to 200 RPM.
What is the bearing lubrication method for the YCM GT300LB spindle?
Grease lubrication.
At what RPM does the YCM GT300LB spindle achieve full horsepower?
200 RPM.
