YCM B8-SY Flashcards
What is the X-axis travel of the YCM B8-SY?
10.23” (6.88” + 3.35”)
What is the Y-axis travel of the YCM B8-SY?
3.94” (+1.97”/-1.96”)
What is the Z-axis travel of the YCM B8-SY?
30.70”
What type of control system does the YCM B8-SY use?
FANUC TXP200FB+
What industries is the YCM B8-SY best suited for?
Medical, aerospace, automotive, and job shops
What material is used in the YCM B8-SY’s bed construction?
Meehanite cast iron
What is the design of the machine bed for the YCM B8-SY?
A 30° one-piece slant bed
How does the wedge-type Y-axis benefit the YCM B8-SY?
It allows for machining above or below the centerline, enabling milling, drilling, tapping, and off-center hole operations
What is the purpose of the rigid box-way construction on the YCM B8-SY?
To enhance stability and allow for high metal removal rates
What type of guideway is used for the B-axis on the YCM B8-SY?
Linear guideway
What is the rapid traverse rate for the X-axis on the YCM B8-SY?
787 IPM
What is the rapid traverse rate for the Z-axis on the YCM B8-SY?
945 IPM
What is the rapid traverse rate for the Y-axis on the YCM B8-SY?
394 IPM
What is the rapid traverse rate for the B-axis on the YCM B8-SY?
787 IPM
What is the cutting feed rate for all axes on the YCM B8-SY?
394 IPM
What is the main spindle nose interface on the YCM B8-SY?
A2-8
What is the chuck size on the main spindle of the YCM B8-SY?
10”
What is the spindle speed range for the main spindle on the YCM B8-SY?
10 to 3,500 RPM
What is the power rating for the main spindle on the YCM B8-SY?
25 HP (continuous)
What is the maximum torque on the main spindle of the YCM B8-SY?
204 ft. lbs. (30 min ED)
What is the sub spindle nose interface on the YCM B8-SY?
A2-5
What is the chuck size for the sub spindle on the YCM B8-SY?
6”
What is the spindle speed range for the sub spindle on the YCM B8-SY?
10 to 6,000 RPM
What is the power rating for the sub spindle on the YCM B8-SY?
10 HP (continuous)
What is the sub spindle’s maximum torque on the YCM B8-SY?
68 ft. lbs. (30 min ED)
How many tools can the turret on the YCM B8-SY hold?
12 tools
What is the tool standard for the YCM B8-SY turret?
BMT65
What is the live tool speed range on the YCM B8-SY?
100 to 4,500 RPM
What is the live tool power rating on the YCM B8-SY?
5 HP (continuous)
What is the total tool index time for the turret on the YCM B8-SY?
0.95 seconds
What is the maximum turning diameter on the YCM B8-SY?
13.77”
What is the standard turning diameter on the YCM B8-SY?
10”
What is the maximum turning length on the YCM B8-SY?
28.7”
What is the swing over the bed for the YCM B8-SY?
39.37”
What is the swing over the carriage for the YCM B8-SY?
34.25”
What is the minimum air pressure required for the YCM B8-SY?
80 PSI (5.5 bar)
What is the coolant tank capacity of the YCM B8-SY?
92 US gallons
What is the electrical power requirement for the YCM B8-SY?
220V, 3-phase, 60 Hz
What is the KVA rating for the YCM B8-SY?
59 KVA
What is the breaker size recommended for the YCM B8-SY?
155A (160A)
What type of chip conveyor does the YCM B8-SY use?
Lift-up style chip conveyor
Where is the chip conveyor discharge located on the YCM B8-SY?
Left-side, rear discharge
What types of chips can the YCM B8-SY’s conveyor handle?
Nest, stringy, medium, and large broken chips
What is the benefit of the chip conveyor on the YCM B8-SY?
Improves chip removal and reduces coolant tank cleaning time
How does the YCM B8-SY minimize chip migration?
Through efficient chip evacuation and the lift-up style conveyor design
What are the floor space requirements for the YCM B8-SY?
155.59” x 84.25” x 88.97”
What is the weight of the YCM B8-SY?
16,445 lbs.
What are the shipping dimensions of the coolant tank for the YCM B8-SY?
131” x 60.43” x 15.35”
What is the shipping weight of the machine itself for the YCM B8-SY?
18,890 lbs.