Workshop processes Flashcards
1
Q
Shaping and forming acrylic: 4
A
- finish edges (crossfile, drawfile, wetndry, polish)
- Melt in oven/strip heater
- put the floppy plastic in former to cool
2
Q
Shaping/forming metals
A
Paper flashcard
3
Q
Clamping accurately: 3
A
- dry clamp first
- check corners with a trisquare or measure diagonals
3
Q
Screwing wood to (anything) :3
A
- use a countersink screw
- drill pilot hole
- drill clearance hole
- countersink so that the screw sits flush to wood surface
4
Q
Laminating
A
Sash clamp above & below to stop BOWING
wood grains different directions
