Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

Health & Safety Test > Working at height equipment (Plant) > Flashcards

Working at height equipment (Plant) Flashcards

1
Q

What does MEWP stand for?

A

Mobile Elevating Work Platform

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

What does MCWP stand for?

A

Mast Climbing Work Platform

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

What are the three main types of MEWP?

A
  • Scissor lift
  • Telescopic boom (cherry picker)
  • Articulating and telescopic boom
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

Name two of the main risks of using an MEWP

Five possible answers

A
  • Collision
  • Entrapment
  • Overturning
  • Falling from carrier
  • Thrown from carrier
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Before even looking at an MEWP, ensure that…

Four answers

A
  • There is proper planning in place
  • Operators are familiar and trained
  • Vehicles are segregated from the work area
  • Teams are aware of emergency procedure during machine failure
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

Before beginning work on an MEWP

what should be checked?

Three answers

A
  • Current report if there are any issues
  • Ground level emergency stop is functional
  • Guard rails & toe boards are fit for purpose
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What should you consider in your environment when working on an MEWP?

Four answers

A
  • The ground’s suitability
  • Equipment is protected from adverse weather
  • Determine safest operational height given current wind speed
  • Areas beneath and around the MEWP are clear of people through use of barriers
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

Before extending an MEWP, what should be extended and chocked?

A

The outriggers, to increase stability and reduce likelihood of toppling over

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

When working on an MEWP…

Do NOT…

Four answers

A
  • operate close to overhead power lines
  • allow people to climb out of the carrier to give access
  • protrude any section of the equipment into traffic
  • move the plant unless the manufacturers state it is safe to do so
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

When you have finished work for the day (MEWP)

What three things should be done?

A
  • Remove all tools from carrier
  • Power turned off, keys & equipment secured against vandalism or theft
  • Check machine log for faults or alerts
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

True or false:
All MEWPS are “rough terrain”

A

False.
Only some are, and the manufacturers manual will have specific limitations. These should be checked before undertaking work on rough or uneven terrain.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

If using an MEWP indoors, what should be considered?

A

The maximum load of any lifts, in case you need to work on a different floor.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

True or false:
Fall protection is not needed at all when using an MEWP

A

False.
If it is deemed necessary, a short work-restraint lanyard provides suitable protection from the majority of fall risks.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

True or false:
MCWPs are used in repairs or refurbishment of high rise buildings

A

True.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

True or false:
Anyone can erect and strike an MCWP.

A

False.
Only experts can erect and strike safely.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

True or false:
A roof can be added to an MCWP reduce any effects of inclement weather

A

True, but this does impact the max load of the MCWP.

17
Q

After an MCWP has been installed

A handover certificate be given, and it should include…

Four answers

A
  • Emergency procedure
  • Operation guide
  • Max safe load
  • Inspection & basic maintenance
18
Q

Name two general usage tips for an MCWP

Five possible answers

A
  • There must be an up to date and thorough inspection report present
  • Ensure that masts are connected securely, with outriggers if necessary
  • It has suitable guard rails and toe boards
  • Controls are in the platform only
  • The area directly below the platform is kept clear through the use of barriers
19
Q

Name two general usage tips for an MCWP

Five possible answers

A
  • There must be an up to date and thorough inspection report present
  • Ensure that masts are connected securely, with outriggers if necessary
  • It has suitable guard rails and toe boards
  • Controls are in the platform only
  • The area directly below the platform is kept clear through the use of barriers
20
Q

Name two general usage tips for an MCWP

Five possible answers

A
  • There must be an up to date and thorough inspection report present
  • Ensure that masts are connected securely, with outriggers if necessary
  • It has suitable guard rails and toe boards
  • Controls are in the platform only
  • The area directly below the platform is kept clear through the use of barriers

Health & Safety Test (16 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions