Week 10 Review Flashcards
Patients with indications for lumbar traction (meaning they could benefit from the effects of traction), who also have claustrophobia may benefit more from:
Manual lumbar traction
Which of the following is an advantage of positional traction therapy?
It can be used as part of home therapy when symptoms are severe and irritable
The force of traction:
Should not exceed 30 lb. in the cervical spine
Which of the following is NOT a contraindication to the use of static traction?
Chronic injury or pain
If a patient has peripheralization of symptoms while being treated with mechanical traction, what should you (the therapist) do FIRST:
Immediately stop the treatment
In which of the following situations is spinal traction NOT appropriate?
To provide relief from pain directly after a cervical spine fracture
Traction may help patient’s whose symptoms are ____ by joint loading and are ____ by distraction or reduction of joint loading.
aggravated; relieved
To minimize the risk of adverse consequences, traction should be applied with a ____ at first, while monitoring the patient’s response. If the response is positive, traction force can then be gradually ____ until maximum benefit is obtained.
low force; increased
For mechanical lumbar traction, when the intermittent setting is used, meaning there are hold and relax times where the force varies, the relaxed force should be approximately ____ of the maximum force or ____. Total release of the force during the relaxed phase of intermittent traction ____ recommended because this can cause rebound aggravation of the patient’s symptoms.
50%; less; is not
The greatest difference between the parameters used for lumbar and cervical traction is the:
amount of force
You have a patient who has pain related to joint dysfunction (meaning the apophyseal joints of the lumbar vertebrae are not moving as they should). As such, you decide that they are a perfect candidate for intermittent lumbar traction with short hold and relax times.
This is not the patient’s initial use of traction during this episode of care, the patient weighs 200 lbs, and you have appropriately decided to set the max force for the hold time at 100 lbs.
Using what you know about the recommendations for the relaxed force for intermittent lumbar traction what is the most appropriate force to be used during the relax time (the minimum force).
The relaxed force can safely be set on the machine at 50 lbs (meaning the patient drops from 100 lbs down to 50 lbs of force during the relax time)
Mechanical traction is unlikely to be effective in achieving which of the following?
Permanent reduction of herniated nucleus pulposus
What is the evidence on the effect of cervical traction on intervertebral foramina dimensions?
Increase during traction application
How much traction force is required to overcome friction of the lower body when doing lumbar traction?
Up to approximately one-half of body weight
How can the friction provided by the patient’s body weight against the traction table be significantly reduced during lumbar traction?
Unlock the table so segments can be separated.